AMD Radeon Pro 5300M vs NVIDIA RTX PRO 6000 Blackwell Max-Q Comparison

AMD
RADEON

AMD Radeon Pro 5300M

CORE STATE Navi 14
VRAM 4 GB
CLOCK SPEED 1250 MHz
TDP 85 W
BUS WIDTH 128 bit
ARCHITECTURE RDNA 1.0
nm
PROCESS 7 nm
LAUNCH DATE 2019
VS
NVIDIA
GEFORCE

RTX PRO 6000 Blackwell Max-Q

CORE STATE GB202
VRAM 96 GB
CLOCK SPEED 2280 MHz
TDP 300 W
BUS WIDTH 512 bit
ARCHITECTURE Blackwell 2.0
nm
PROCESS 5 nm
LAUNCH DATE 2025

PERFORMANCE BENCHMARKS

geekbench_metal
33,626
N/A
geekbench_opencl
29,252
N/A
geekbench_vulkan
27,912
N/A
passmark_directx_10
36
N/A
passmark_directx_11
37
N/A
passmark_directx_12
25
N/A
passmark_directx_9
80
N/A
passmark_g2d
582
N/A
passmark_g3d
5,918
N/A
passmark_gpu_compute
2,658
N/A
3dmark_3dmark_steel_nomad_dx12
N/A
11,088

Analysis: AMD Radeon Pro 5300M vs NVIDIA RTX PRO 6000 Blackwell Max-Q

NVIDIA’s RTX PRO 6000 Blackwell Max-Q and AMD’s Radeon Pro 5300M occupy opposite ends of the professional GPU spectrum, separated by five years of architecture evolution and a 16x gap in memory capacity. The RTX PRO 6000 targets max-workload compute and AI, while the Radeon Pro 5300M is a legacy mobile part for lightweight Mac workflows. The data reveals a chasm in raw throughput, but the story is more nuanced when examining specific benchmark types and architectural priorities.

Head-to-Head Benchmarks

Direct head-to-head benchmark comparisons are unavailable in the dataset, so the analysis relies on each card’s standalone benchmark suite and average scores. The RTX PRO 6000 Blackwell Max-Q posts an average benchmark score of 11,088, derived solely from a 3DMark Steel Nomad DX12 result of 11,088. This places it at the 50th percentile among all GPUs, a modest standing that reflects a niche workload profile rather than weak performance. In contrast, the Radeon Pro 5300M averages 10,013 across ten tests, landing at the 48th percentile.

The raw compute disparity is staggering. The RTX PRO 6000 delivers 109.7 TFLOPS of FP32 performance, while the Radeon Pro 5300M manages 3.2 TFLOPS — a 34-fold difference. FP16 performance tells a similar story: 109.7 TFLOPS on the NVIDIA card versus 6.4 TFLOPS on the AMD (which uses a 2:1 ratio, meaning half the FP32 rate). Texture and pixel rates reinforce the gap: the RTX PRO 6000 achieves 1,714.6 GTexel/s and 437.8 GPixel/s, versus 100.0 GTexel/s and 40.00 GPixel/s for the Radeon.

Looking at the nearest rivals, the RTX PRO 6000 is essentially tied with the RTX PRO 6000D Blackwell Max-Q (0% delta) and sits 0.1% ahead of the AMD Radeon RX 550 and 0.4% ahead of the GeForce GTX 1650 SUPER in average score. This clustering suggests that the 3DMark Steel Nomad DX12 test is not a differentiator at this performance tier. Meanwhile, the Radeon Pro 5300M is 0.3% behind the Quadro K5100M, 0.5% ahead of the GTX 870M, and 1.7% ahead of the Quadro 6000 in its average score — indicating it sits in a tight pack of older mobile and workstation parts.

In the Radeon’s own benchmark suite, the strongest result is Geekbench Metal at 33,626, followed by OpenCL at 29,252 and Vulkan at 27,912. The PassMark scores are far lower: G3D at 5,918, GPU Compute at 2,658, and G2D at 582. The DirectX legacy tests (9/10/11/12) range from 25 to 80, which are minimal figures. This spread suggests the Radeon Pro 5300M excels in Apple-centric Metal workloads but struggles in traditional Windows DirectX scenarios. For the RTX PRO 6000, the single 3DMark result of 11,088 provides no comparable breakdown, so cross-API conclusions are limited.

The Verdict

The data overwhelmingly favors the NVIDIA RTX PRO 6000 Blackwell Max-Q for any task requiring massive compute throughput, large memory pools, or modern API support. It offers 24x the FP32 performance, 24x the memory (96 GB vs 4 GB), and 9.3x the memory bandwidth (1.79 TB/s vs 192.0 GB/s) compared to the Radeon Pro 5300M. The RTX PRO 6000 also supports DirectX 12 Ultimate (12_2) and Vulkan 1.4, while the Radeon is limited to DirectX 12 (12_1). For professionals running AI training, large-scale rendering, or multi-GPU scientific workloads, the choice is unambiguous.

However, the Radeon Pro 5300M is not without merit in its niche. Its Geekbench Metal score of 33,626 is strong for a mobile GPU, and its 85 W TDP (versus 300 W for the NVIDIA card) means it can operate in thin laptops without external power connectors. The RTX PRO 6000 requires a 16-pin connector and a 700 W suggested PSU, making it a desktop-only solution. For Mac users needing basic 3D acceleration or video playback, the Radeon Pro 5300M’s end-of-life status and 4 GB GDDR6 memory are sufficient for light tasks but will bottleneck modern workloads.

Strictly from the data, the RTX PRO 6000 wins on every compute metric, API level, and memory specification. The Radeon Pro 5300M only wins on power efficiency (85 W vs 300 W) and portability (no slot width, no power connectors, portable-device-dependent outputs). If the workload fits within 4 GB of memory and Metal-centric APIs, the Radeon is functional; otherwise, the NVIDIA card is the only viable option.

FAQ

Q: Which GPU has higher FP32 performance?

A: The NVIDIA RTX PRO 6000 Blackwell Max-Q delivers 109.7 TFLOPS FP32, while the AMD Radeon Pro 5300M achieves 3.2 TFLOPS — a 34x advantage for NVIDIA.

Q: Can the AMD Radeon Pro 5300M handle modern DirectX 12 Ultimate games?

A: No. The Radeon Pro 5300M supports DirectX 12 (12_1), not DirectX 12 Ultimate (12_2). Its PassMark DirectX 12 score is only 25, indicating minimal DX12 performance.

Q: What memory configuration does each GPU use?

A: The RTX PRO 6000 has 96 GB of GDDR7 on a 512-bit bus with 1.79 TB/s bandwidth. The Radeon Pro 5300M has 4 GB of GDDR6 on a 128-bit bus with 192.0 GB/s bandwidth.

Q: Which GPU is better for Apple Metal workloads?

A: The Radeon Pro 5300M scores 33,626 in Geekbench Metal, which is its strongest result. The RTX PRO 6000 has no Metal benchmark data, so no direct comparison exists.

Q: Are these GPUs comparable in power consumption?

A: No. The RTX PRO 6000 has a 300 W TDP and requires a 16-pin power connector with a 700 W suggested PSU. The Radeon Pro 5300M has an 85 W TDP and uses no external power connectors.

Q: What is the release date difference?

A: The NVIDIA RTX PRO 6000 launched on 2025-03-17, while the AMD Radeon Pro 5300M launched on 2019-11-12 — a gap of over five years.

Specification Differences

The two GPUs differ in nearly every measurable specification. The RTX PRO 6000 uses the GB202 chip on a 5 nm process, while the Radeon Pro 5300M uses Navi 14 on a 7 nm process. Transistor counts are 92,200 million versus 6,400 million, and die sizes are 750 mm² versus 158 mm². Clock speeds differ: the RTX PRO 6000 runs at 1035 MHz base and 2280 MHz boost; the Radeon runs at 1000 MHz base and 1250 MHz boost. Memory speed is 1750 MHz (28 Gbps effective) on NVIDIA versus 1500 MHz (12 Gbps effective) on AMD.

The RTX PRO 6000 has 24,064 shading units, 752 TMUs, 192 ROPs, 188 RT cores, and 752 tensor cores. The Radeon Pro 5300M has 1,280 shading units, 80 TMUs, 32 ROPs, and no dedicated RT or tensor cores. Pixel and texture rates are 437.8 GPixel/s and 1,714.6 GTexel/s for NVIDIA, versus 40.00 GPixel/s and 100.0 GTexel/s for AMD. The NVIDIA card is dual-slot with dimensions of 267 mm x 111 mm x 40 mm; the AMD card has no listed dimensions or slot width. Bus interfaces are PCIe 5.0 x16 versus PCIe 4.0 x8. Display outputs are 4x DisplayPort 2.1b versus portable-device-dependent.

Architecture Differences

The architectural gap is generational. The RTX PRO 6000 uses Blackwell 2.0 architecture with a 5 nm TSMC process, 92,200 million transistors, and a transistor density of 122.9M per mm². It features 188 ray tracing cores and 752 tensor cores, enabling hardware-accelerated RT and AI workloads. The Radeon Pro 5300M uses RDNA 1.0 on a 7 nm process with 6,400 million transistors and a density of 40.5M per mm². It has no RT or tensor cores, meaning it lacks dedicated hardware for ray tracing or tensor operations.

The memory subsystems are fundamentally different: GDDR7 on a 512-bit bus for NVIDIA versus GDDR6 on a 128-bit bus for AMD. The RTX PRO 6000 supports DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4; the Radeon supports DirectX 12 (12_1), OpenGL 4.6, and Vulkan 1.4. The NVIDIA card’s FP16 performance is 1:1 with FP32 (109.7 TFLOPS), while the AMD card’s FP16 is 2:1 (6.4 TFLOPS from 3.2 TFLOPS FP32). The RTX PRO 6000 is built for compute-heavy, server-grade tasks, while the Radeon Pro 5300M is a mobile, low-power part optimized for Apple’s Metal API.

Where Each One Wins

The NVIDIA RTX PRO 6000 Blackwell Max-Q wins in every compute-heavy scenario. Its 96 GB GDDR7 memory and 1.79 TB/s bandwidth support massive datasets that would exhaust the Radeon’s 4 GB pool instantly. The 188 RT cores and 752 tensor cores make it suitable for ray-traced rendering, AI inference, and machine learning training. The 109.7 TFLOPS FP32 and FP16 performance is ideal for scientific simulation, video processing, and any workload that can scale across 24,064 shading units. Its PCIe 5.0 x16 interface and DisplayPort 2.1b outputs further position it for high-end workstation desktops.

The AMD Radeon Pro 5300M wins in portability and power-constrained environments. Its 85 W TDP allows integration into laptops without external power, and its lack of power connectors means simpler system design. The Geekbench Metal score of 33,626 indicates strong performance in Apple’s ecosystem, making it a reasonable choice for MacBook Pro users doing light 3D work or video editing. Its 4 GB memory is sufficient for basic texture workloads and legacy applications. For users prioritizing battery life, silence, or macOS compatibility over raw compute, the Radeon Pro 5300M remains functional, though its end-of-life status and 48th percentile ranking suggest limited future-proofing. In any head-to-head benchmark involving modern APIs or large memory footprints, the RTX PRO 6000 is the definitive winner.

DETAILED SPECIFICATIONS

SPECIFICATION
Pro 5300M
RTX PRO 6000 Blackwell Max-Q
Core Specs
Shading Units
1,280
24,064 +1780.0%
Shaders
1,280
24,064 +1780.0%
TMUs
80
752 +840.0%
ROPs
32
192 +500.0%
Compute Units
20
—
SM Count
—
188
Clocks
Base Clock
1000 MHz
1035 MHz
Boost Clock
1250 MHz
2280 MHz
Memory Clock
1500 MHz 12 Gbps effective
1750 MHz 28 Gbps effective
Memory
Memory Size
4 GB
96 GB
VRAM (MB)
4,096
98,304 +2300.0%
Memory Type
GDDR6
GDDR7
Memory Bus
128 bit
512 bit
Bandwidth
192.0 GB/s
1.79 TB/s
Cache
L1 Cache
—
128 KB (per SM)
L2 Cache
2 MB
128 MB
Performance
Pixel Rate
40.00 GPixel/s
437.8 GPixel/s
Texture Rate
100.0 GTexel/s
1,714.6 GTexel/s
FP32 (TFLOPS)
3.200 TFLOPS
109.7 TFLOPS
FP64 (TFLOPS)
200.0 GFLOPS (1:16)
1.715 TFLOPS (1:64)
FP16 (TFLOPS)
6.400 TFLOPS (2:1)
109.7 TFLOPS (1:1)
AI/RT
RT Cores
—
188
Tensor Cores
—
752
Power
TDP
85 W
300 W
TDP (W)
85
300 +252.9%
Suggested PSU
—
700 W
Power Connectors
None
1x 16-pin
Architecture
Architecture
RDNA 1.0
Blackwell 2.0
GPU Name
Navi 14
GB202
Generation
Radeon Pro Mac (Navi Mobile)
Blackwell PRO W (x000)
Process Size
7 nm
5 nm
Transistors
6,400 million
92,200 million
Die Size
158 mm²
750 mm²
Foundry
TSMC
TSMC
Density
40.5M / mm²
122.9M / mm²
API Support
DirectX
12 (12_1)
12 Ultimate (12_2)
OpenGL
4.6
4.6
Vulkan
1.4
1.4
OpenCL
2.1
3.0
CUDA
—
12.0
Shader Model
6.8
6.9
Physical
Slot Width
—
Dual-slot
Length
—
267 mm 10.5 inches
Height
—
111 mm 4.4 inches
Outputs
Portable Device Dependent
4x DisplayPort 2.1b
Bus Interface
PCIe 4.0 x8
PCIe 5.0 x16
Other
Launch Price
—
8,565 USD
Production
End-of-life
Active
Predecessor
—
Workstation Ada
View Radeon Pro 5300M Details View RTX PRO 6000 Blackwell Max-Q Details