AMD Radeon Pro 5300M vs AMD Radeon R9 M275X Comparison
AMD Radeon Pro 5300M
Radeon R9 M275X
PERFORMANCE BENCHMARKS
Analysis: AMD Radeon Pro 5300M vs AMD Radeon R9 M275X
The AMD Radeon R9 M275X and AMD Radeon Pro 5300M represent two distinct eras of mobile graphics, separated by nearly six years of architectural evolution. The benchmark data reveals a decisive generational gap, with the Pro 5300M dominating in every shared test, yet the R9 M275X holds a surprisingly competitive position in the overall percentile rankings. This analysis examines the raw numbers, architectural foundations, and practical implications of these two end-of-life mobile GPUs.
Head-to-Head Benchmarks
The head-to-head results are unambiguous, with the AMD Radeon Pro 5300M winning both available comparisons by overwhelming margins. In the Geekbench OpenCL test, the Pro 5300M scores 29,252 against the R9 M275X’s 11,200, a delta of -61.7% from the perspective of the older card. This means the Pro 5300M delivers roughly 2.6 times the raw compute performance in this workload. The Vulkan results tell a similar story: the Pro 5300M posts 27,912 versus 9,964 for the R9 M275X, a -64.3% delta. The gap here is even more pronounced, suggesting the newer architecture scales better with modern graphics APIs.
These are not marginal improvements; they represent a fundamental shift in capability. The R9 M275X’s best score in either test is 11,200, which is still less than half of the Pro 5300M’s lowest head-to-head result. The data implies that any application leveraging OpenCL or Vulkan will see a dramatic performance uplift on the newer part. Interestingly, despite this 2.6x advantage in raw scores, the percentile rankings are close: the R9 M275X sits at the 49th percentile of all GPUs, while the Pro 5300M is at the 48th. This counterintuitive result suggests that the broader GPU landscape has shifted upward, and the Pro 5300M’s absolute lead is not enough to place it higher relative to its contemporaries.
Architecture Differences
The two GPUs are built on fundamentally different foundations. The R9 M275X uses the Venus chip based on GCN 1.0 architecture, fabricated on a 28 nm process at TSMC. It packs 1,500 million transistors into a 123 mm² die, yielding a transistor density of 12.2 million per square millimeter. The Pro 5300M, conversely, employs the Navi 14 chip with RDNA 1.0 architecture, built on a 7 nm process, also at TSMC. This newer node allows for 6,400 million transistors in a 158 mm² die, achieving a density of 40.5 million per square millimeter—more than three times the density of the older chip.
These architectural differences manifest in every major specification. The R9 M275X offers 640 shading units, 40 texture mapping units, and 16 ROPs. The Pro 5300M doubles these counts to 1,280 shading units, 80 TMUs, and 32 ROPs. Clock speeds also favor the newer card: the Pro 5300M runs at a 1000 MHz base and 1250 MHz boost, compared to 900 MHz base and 925 MHz boost for the R9 M275X. The memory subsystem is equally transformed. The R9 M275X uses 2 GB of GDDR5 on a 128-bit bus, delivering 72.00 GB/s of bandwidth at 1125 MHz (4.5 Gbps effective). The Pro 5300M doubles capacity to 4 GB of GDDR6, keeping the same 128-bit bus but boosting bandwidth to 192.0 GB/s via a 1500 MHz (12 Gbps effective) clock. That is 2.67 times the memory bandwidth, which is critical for texture-heavy and high-resolution workloads.
The compute capabilities scale accordingly. Pixel rate jumps from 14.80 GPixel/s to 40.00 GPixel/s, and texture rate from 37.00 GTexel/s to 100.0 GTexel/s. FP32 performance rises from 1,184.0 GFLOPS to 3.200 TFLOPS. The Pro 5300M also adds FP16 support at 6.400 TFLOPS (2:1 ratio), a feature absent from the R9 M275X’s spec sheet. The Pro 5300M further distinguishes itself with a TDP of 85 W and no power connectors, indicating it is designed for portable device integration, whereas the R9 M275X lists no TDP or power connector information. The bus interface also differs: the older card uses PCIe 3.0 x16, while the newer one uses PCIe 4.0 x8, which offers similar bandwidth but with a different lane configuration. API support is another differentiator, with the Pro 5300M supporting DirectX 12 (12_1) and Vulkan 1.4, while the R9 M275X is limited to DirectX 12 (11_1) and Vulkan 1.2.170.
FAQ
Q: Which GPU has higher raw compute performance in OpenCL?
A: The AMD Radeon Pro 5300M scores 29,252 in Geekbench OpenCL, which is 2.6 times higher than the R9 M275X’s 11,200. The delta is -61.7% from the older card’s perspective.
Q: How do the memory bandwidth figures compare?
A: The Pro 5300M provides 192.0 GB/s of bandwidth using 4 GB of GDDR6 on a 128-bit bus. The R9 M275X offers only 72.00 GB/s with 2 GB of GDDR5 on the same bus width. This represents a 2.67x advantage for the newer part.
Q: Is the R9 M275X competitive in any benchmark?
A: In the shared head-to-head tests, no. The R9 M275X loses both Geekbench OpenCL and Vulkan tests. However, its average benchmark score of 10,582 is actually higher than the Pro 5300M’s 10,013, and it holds a 49th percentile ranking versus the Pro 5300M’s 48th.
Q: What are the transistor density differences?
A: The R9 M275X has a density of 12.2 million transistors per mm², while the Pro 5300M achieves 40.5 million per mm². This is due to the 28 nm process on the older chip versus the 7 nm process on the newer one.
Q: Which GPU supports newer API versions?
A: The Pro 5300M supports DirectX 12 (12_1) and Vulkan 1.4, while the R9 M275X is limited to DirectX 12 (11_1) and Vulkan 1.2.170. Both support OpenGL 4.6.
Q: How does the FP32 compute performance compare?
A: The Pro 5300M delivers 3.200 TFLOPS of FP32 performance, while the R9 M275X provides 1,184.0 GFLOPS. The Pro 5300M also adds FP16 capability at 6.400 TFLOPS, which the R9 M275X does not list.
The Verdict
The data leads to a clear conclusion: the AMD Radeon Pro 5300M is the vastly superior GPU in terms of raw performance, architectural modernity, and feature set. Its 2.6x lead in OpenCL and 2.8x lead in Vulkan are decisive. The doubling of shading units, TMUs, ROPs, and memory capacity, combined with a 2.67x bandwidth increase, makes it the obvious choice for any compute-intensive or modern gaming workload. The R9 M275X, despite its higher average benchmark score and percentile ranking, cannot overcome the sheer magnitude of the performance gap in shared tests. Its higher average score is likely a statistical artifact of the different benchmark sets available for each card, not an indication of real-world parity. For users who need to run Vulkan or OpenCL applications, the Pro 5300M is the only rational pick. The R9 M275X might still suffice for legacy DirectX 11 workloads, but its older architecture and API limitations make it a poor choice for future-proofing.
Specification Differences
The following specifications differ between the two GPUs:
- Chip: Venus vs. Navi 14
- Architecture: GCN 1.0 vs. RDNA 1.0
- Generation: Gem System (R9 M200) vs. Radeon Pro Mac (Navi Mobile)
- Process Node: 28 nm vs. 7 nm
- Transistors: 1,500 million vs. 6,400 million
- Die Size: 123 mm² vs. 158 mm²
- Transistor Density: 12.2M / mm² vs. 40.5M / mm²
- Base Clock: 900 MHz vs. 1000 MHz
- Boost Clock: 925 MHz vs. 1250 MHz
- Memory Clock: 1125 MHz / 4.5 Gbps effective vs. 1500 MHz / 12 Gbps effective
- Memory Size: 2 GB vs. 4 GB
- Memory Type: GDDR5 vs. GDDR6
- Memory Bandwidth: 72.00 GB/s vs. 192.0 GB/s
- Shading Units: 640 vs. 1280
- TMUs: 40 vs. 80
- ROPs: 16 vs. 32
- Pixel Rate: 14.80 GPixel/s vs. 40.00 GPixel/s
- Texture Rate: 37.00 GTexel/s vs. 100.0 GTexel/s
- FP32: 1,184.0 GFLOPS vs. 3.200 TFLOPS
- FP16: None vs. 6.400 TFLOPS (2:1)
- TDP: None vs. 85 W
- Power Connectors: None vs. None (listed)
- Bus Interface: PCIe 3.0 x16 vs. PCIe 4.0 x8
- Display Outputs: None vs. Portable Device Dependent
- DirectX: 12 (11_1) vs. 12 (12_1)
- Vulkan: 1.2.170 vs. 1.4
- Release Date: 2014-01-27 vs. 2019-11-12
Where Each One Wins
The AMD Radeon Pro 5300M wins in every measurable benchmark category where both cards are tested. Its advantages in OpenCL (29,252 vs. 11,200) and Vulkan (27,912 vs. 9,964) are overwhelming. The Pro 5300M is also the clear winner in architectural features: it has double the shading units, TMUs, and ROPs, four times the transistor count, and nearly three times the memory bandwidth. Its 7 nm process node enables higher clock speeds and greater efficiency, as evidenced by its 85 W TDP despite the massive performance lead. For any workload involving modern APIs, high-resolution textures, or compute-heavy tasks like machine learning inference, the Pro 5300M is the definitive choice.
The R9 M275X, conversely, has no benchmark wins in the head-to-head data. Its only statistical advantages are its higher average benchmark score (10,582 vs. 10,013) and its slightly better percentile ranking (49th vs. 48th). These figures suggest that within the context of its own era, the R9 M275X was a competent mid-range part, but they do not translate into any practical advantage against the Pro 5300M. The R9 M275X might find a niche in systems that require PCIe 3.0 x16 connectivity or that cannot support the newer card’s power requirements, but the data does not support any performance-based reason to choose it. The verdict is clear: for performance, the Pro 5300M wins everywhere; for legacy compatibility, the R9 M275X may have a place, but not for its speed.