AMD Radeon HD 6850 X2 vs NVIDIA GeForce GT 635M Comparison

AMD
RADEON

AMD Radeon HD 6850 X2

CORE STATE Barts
VRAM 2 GB
CLOCK SPEED —
TDP 254 W
BUS WIDTH 256 bit
ARCHITECTURE TeraScale 2
nm
PROCESS 40 nm
LAUNCH DATE 2011
VS
NVIDIA
GEFORCE

GeForce GT 635M

CORE STATE GF108
VRAM 2 GB
CLOCK SPEED —
TDP 35 W
BUS WIDTH 128 bit
ARCHITECTURE Fermi
nm
PROCESS 40 nm
LAUNCH DATE 2012

PERFORMANCE BENCHMARKS

geekbench_opencl
3,977
3,740

Analysis: AMD Radeon HD 6850 X2 vs NVIDIA GeForce GT 635M

The AMD Radeon HD 6850 X2 and NVIDIA GeForce GT 635M occupy entirely different corners of the GPU landscape, and the benchmark data reflects that chasm clearly. In the single available OpenCL benchmark, the AMD card scores 3977, which is 6.3% higher than the NVIDIA’s 3740, giving AMD a clean 1-0 win record in head-to-head tests. That raw score gap is decisive, but the more telling story lies in the percentile rankings: the HD 6850 X2 sits in the 24th percentile of all GPUs, while the GT 635M sits just below at the 22nd percentile. Both are firmly in the lower half of the performance spectrum, yet the AMD part’s advantage is consistent across every metric that matters—compute throughput, memory bandwidth, and pixel fill.

Where Each One Wins

The AMD Radeon HD 6850 X2 wins on raw compute and memory bandwidth, which translates directly into OpenCL workloads that stress parallel processing. Its 1.536 TFLOPS of FP32 performance is more than eight times the GT 635M’s 182.4 GFLOPS, and its 134.4 GB/s of memory bandwidth dwarfs the NVIDIA’s 28.80 GB/s. In the geekbench_opencl test, the AMD card’s 3977 score outpaces the GT 635M’s 3740 by 6.3%, a margin that reflects the massive difference in shading units (960 vs 96) and texture mapping units (48 vs 16). For any task that scales with shader count—compute shaders, physics simulations, or image processing—the HD 6850 X2 is the clear winner.

The NVIDIA GeForce GT 635M wins on efficiency and portability. Its 35 W TDP is a fraction of the AMD card’s 254 W, and it requires no power connectors, fitting into an IGP slot width. The GT 635M also supports DirectX 12 (11_0) and OpenGL 4.6, whereas the AMD card is capped at DirectX 11.2 (11_0) and OpenGL 4.4. For a laptop or small-form-factor system where power draw and thermals are the primary constraints, the GT 635M is the only viable option—the HD 6850 X2’s dual-slot footprint and 2x 8-pin power connectors make it physically incompatible with such builds. The GT 635M also posts a smaller performance deficit than its hardware suggests: its 3740 score is only 6.3% behind the AMD part, despite having one-tenth the shading units.

The Verdict

Pick the AMD Radeon HD 6850 X2 if your priority is absolute compute performance in a desktop context. The data shows a 6.3% lead in OpenCL over the GT 635M, and that lead is backed by a 1.536 TFLOPS FP32 throughput versus 182.4 GFLOPS. The 134.4 GB/s memory bandwidth is 4.7x higher than the NVIDIA’s 28.80 GB/s, which matters for memory-bound workloads. The 960 shading units and 48 TMUs give it a structural advantage that no driver optimization can overcome. The percentile ranking of 24 vs 22 confirms both are entry-level, but the AMD card is the stronger entry-level performer.

Pick the NVIDIA GeForce GT 635M if you need a GPU that fits within a 35 W power envelope and requires no external power connectors. The GT 635M’s IGP slot width and portable-device-dependent display outputs make it the only choice for notebooks or ultra-compact desktops. Its DirectX 12 (11_0) support is a generation ahead of the AMD’s DirectX 11.2 (11_0), and its OpenGL 4.6 support is newer as well. The 6.3% performance gap in OpenCL is real but modest in absolute terms—3740 vs 3977 points—and the power savings of 219 W (254 W vs 35 W) are enormous. If you cannot supply 600 W of system power and dual 8-pin connectors, the AMD card is simply not an option.

Head-to-Head Benchmarks

The sole head-to-head benchmark, geekbench_opencl, shows the AMD Radeon HD 6850 X2 winning with a score of 3977 against the NVIDIA GeForce GT 635M’s 3740, a delta of 6.3%. This is a smaller gap than the raw specification differences would suggest—the AMD card has 10x the shading units (960 vs 96), 3x the TMUs (48 vs 16), and 8x the FP32 throughput (1.536 TFLOPS vs 182.4 GFLOPS). The reason the gap is not larger is likely due to the OpenCL test’s sensitivity to memory bandwidth and driver overhead, where the GT 635M’s 28.80 GB/s, while low, is still sufficient for the workload’s data size.

The AMD card’s 25.60 GPixel/s pixel rate is over 13x the NVIDIA’s 1.900 GPixel/s, which would show up dramatically in any fill-rate-bound test, but no such benchmark is in the data. The texture rate difference is also stark: 38.40 GTexel/s vs 7.600 GTexel/s, a 5x margin. In the nearest-rival context, the HD 6850 X2’s 3977 score places it 0.3% above the NVIDIA Quadro K2000 (3964) and 0.5% above the GeForce 830M (3957), while the GT 635M’s 3740 sits 0.6% above the Quadro 3000M (3718) and 1.2% above the GeForce 825M (3694). Notably, the GT 635M is actually 1.4% behind the Intel UHD Graphics 710 (3792), which is a stark indicator of its low standing.

FAQ

Q: Which GPU has the higher OpenCL benchmark score?

A: The AMD Radeon HD 6850 X2 scores 3977, which is 6.3% higher than the NVIDIA GeForce GT 635M’s 3740 in the geekbench_opencl test.

Q: How do their memory bandwidths compare?

A: The AMD HD 6850 X2 delivers 134.4 GB/s of bandwidth via a 256-bit GDDR5 bus, while the GT 635M provides 28.80 GB/s over a 128-bit DDR3 bus—a 4.7x advantage for AMD.

Q: What is the power consumption difference?

A: The AMD HD 6850 X2 has a 254 W TDP and requires 2x 8-pin power connectors with a 600 W suggested PSU, while the GT 635M has a 35 W TDP and needs no power connectors.

Q: Which GPU supports newer API versions?

A: The NVIDIA GeForce GT 635M supports DirectX 12 (11_0) and OpenGL 4.6, whereas the AMD Radeon HD 6850 X2 supports DirectX 11.2 (11_0) and OpenGL 4.4.

Q: How do their transistor counts and die sizes differ?

A: The AMD HD 6850 X2 uses 1,700 million transistors on a 255 mm² die, while the GT 635M uses 585 million on a 116 mm² die—both fabricated on TSMC’s 40 nm process.

Q: Are there any rivals close to these GPUs in performance?

A: The HD 6850 X2’s nearest rival is the NVIDIA Quadro K2000 (3964, 0.3% behind), and the GT 635M’s nearest rival is the NVIDIA Quadro 3000M (3718, 0.6% behind), with the Intel UHD Graphics 710 actually beating the GT 635M by 1.4%.

Architecture Differences

The AMD Radeon HD 6850 X2 is built on the Barts chip using TeraScale 2 architecture, part of the Northern Islands (HD 6800) generation. It packs 1,700 million transistors into a 255 mm² die, yielding a transistor density of 6.7M per mm². The NVIDIA GeForce GT 635M uses the GF108 chip with Fermi architecture from the GeForce 600M generation, containing 585 million transistors on a 116 mm² die for a density of 5.0M per mm². Both are fabricated on TSMC’s 40 nm process, but AMD’s design is far more complex.

The AMD card’s compute resources are vastly larger: 960 shading units, 48 TMUs, and 32 ROPs, compared to the GT 635M’s 96 shading units, 16 TMUs, and just 4 ROPs. This 10x shader advantage and 8x ROP advantage define the performance gap. The AMD card’s pixel rate is 25.60 GPixel/s versus 1.900 GPixel/s for NVIDIA, and its texture rate is 38.40 GTexel/s versus 7.600 GTexel/s. The memory subsystems are equally divergent: AMD uses 2 GB of GDDR5 on a 256-bit bus at 4.2 Gbps effective, while NVIDIA uses 2 GB of DDR3 on a 128-bit bus at 1800 Mbps effective. The AMD card also has a higher transistor density (6.7M vs 5.0M per mm²), indicating a more compact logic layout.

Both GPUs are end-of-life products, but their release timing differs: the AMD card launched on 2011-09-18, and the NVIDIA on 2012-03-21. The AMD card’s predecessor is Evergreen and successor is Southern Islands, while the GT 635M’s predecessor is GeForce 500M and successor is GeForce 700M. The AMD card supports only DirectX 11.2 (11_0) and OpenGL 4.4, whereas the GT 635M reaches DirectX 12 (11_0) and OpenGL 4.6, despite being the weaker hardware. Neither card has ray tracing or tensor cores, and neither supports Vulkan according to the data.

Specification Differences

The two cards differ in nearly every measurable specification. The AMD Radeon HD 6850 X2 has a 40 nm process node, 1,700 million transistors, a 255 mm² die, and a transistor density of 6.7M per mm², while the NVIDIA GeForce GT 635M has a 40 nm node, 585 million transistors, a 116 mm² die, and a density of 5.0M per mm². Memory clocks differ significantly: the AMD runs at 1050 MHz (4.2 Gbps effective), while the NVIDIA runs at 900 MHz (1800 Mbps effective). Memory type and bus width also diverge—GDDR5 on a 256-bit bus for AMD versus DDR3 on a 128-bit bus for NVIDIA—producing bandwidths of 134.4 GB/s and 28.80 GB/s respectively.

Shading units (960 vs 96), TMUs (48 vs 16), and ROPs (32 vs 4) all favor AMD by wide margins. Pixel rate is 25.60 GPixel/s for AMD versus 1.900 GPixel/s for NVIDIA, and texture rate is 38.40 GTexel/s versus 7.600 GTexel/s. FP32 performance is 1.536 TFLOPS versus 182.4 GFLOPS, an 8.4x difference. Power requirements are opposite extremes: the AMD card draws 254 W with 2x 8-pin connectors and a 600 W suggested PSU, while the NVIDIA draws 35 W with no connectors and no suggested PSU. Physical form factors differ as well—dual-slot for AMD versus IGP for NVIDIA—and display outputs are 2x DVI, 1x HDMI 1.3a, and 1x DisplayPort 1.1 for AMD versus "Portable Device Dependent" for NVIDIA. Both use PCIe 2.0 x16 and have 2 GB of memory, but the API support favors NVIDIA with DirectX 12 (11_0) and OpenGL 4.6 over AMD’s DirectX 11.2 (11_0) and OpenGL 4.4.

DETAILED SPECIFICATIONS

SPECIFICATION
HD 6850 X2
GT 635M
Core Specs
Shading Units
960
96 -90.0%
Shaders
960
96 -90.0%
TMUs
48
16 -66.7%
ROPs
32
4 -87.5%
Compute Units
12
—
SM Count
—
2
Clocks
GPU Clock
800 MHz
475 MHz
Shader Clock
—
950 MHz
Memory Clock
1050 MHz 4.2 Gbps effective
900 MHz 1800 Mbps effective
Memory
Memory Size
2 GB
2 GB
VRAM (MB)
2,048
2,048 0.0%
Memory Type
GDDR5
DDR3
Memory Bus
256 bit
128 bit
Bandwidth
134.4 GB/s
28.80 GB/s
Cache
L1 Cache
8 KB (per CU)
64 KB (per SM)
L2 Cache
512 KB
256 KB
Performance
Pixel Rate
25.60 GPixel/s
1.900 GPixel/s
Texture Rate
38.40 GTexel/s
7.600 GTexel/s
FP32 (TFLOPS)
1.536 TFLOPS
182.4 GFLOPS
FP64 (TFLOPS)
—
15.20 GFLOPS (1:12)
Power
TDP
254 W
35 W
TDP (W)
254
35 -86.2%
Suggested PSU
600 W
—
Power Connectors
2x 8-pin
None
Architecture
Architecture
TeraScale 2
Fermi
GPU Name
Barts
GF108
Generation
Northern Islands (HD 6800)
GeForce 600M
Process Size
40 nm
40 nm
Transistors
1,700 million
585 million
Die Size
255 mm²
116 mm²
Foundry
TSMC
TSMC
Density
6.7M / mm²
5.0M / mm²
API Support
DirectX
11.2 (11_0)
12 (11_0)
OpenGL
4.4
4.6
OpenCL
1.2
1.1
CUDA
—
2.1
Shader Model
5.0
5.1
Physical
Slot Width
Dual-slot
IGP
Outputs
2x DVI1x HDMI 1.3a1x DisplayPort 1.1
Portable Device Dependent
Bus Interface
PCIe 2.0 x16
PCIe 2.0 x16
Other
Production
End-of-life
End-of-life
Predecessor
Evergreen
GeForce 500M
Successor
Southern Islands
GeForce 700M
View Radeon HD 6850 X2 Details View GeForce GT 635M Details