AMD Radeon AI PRO 9600D vs NVIDIA GeForce RTX 4070 GDDR6 Comparison
AMD Radeon AI PRO 9600D
GeForce RTX 4070 GDDR6
PERFORMANCE BENCHMARKS
Analysis: AMD Radeon AI PRO 9600D vs NVIDIA GeForce RTX 4070 GDDR6
Where Each One Wins
The benchmark data splits these two cards into completely different roles. The AMD Radeon AI PRO 9600D has no recorded benchmark entries in the database, while the NVIDIA GeForce RTX 4070 GDDR6 has a single recorded 3DMark Steel Nomad DX12 score of 4334.5. That asymmetry means the analysis relies on architectural and specification-level comparisons rather than direct performance measurements.
The AMD card targets compute-heavy workloads with 32 GB of GDDR6 memory on a 256-bit bus, delivering 576.0 GB/s of bandwidth. That memory capacity is 2.7 times larger than the NVIDIA card's 12 GB, and the bandwidth advantage is 20% higher. For tasks that spill over the 12 GB limit, the AMD part has a clear structural edge. The NVIDIA card counters with a higher FP32 throughput of 29.15 TFLOPS versus 24.82 TFLOPS, a 17% arithmetic advantage, plus 184 tensor cores that the AMD part lacks entirely.
The use-case split is straightforward. The NVIDIA GeForce RTX 4070 GDDR6 wins on raw shader arithmetic, tensor-accelerated workloads, and higher clock speeds. The AMD Radeon AI PRO 9600D wins on memory capacity, memory bandwidth, pixel fill rate, and power efficiency. The AMD card draws 150 W against 200 W for NVIDIA, a 25% lower power target, while also being a single-slot design compared to the dual-slot NVIDIA card.
Architecture Differences
The two GPUs come from different design philosophies. AMD uses the Navi 48 chip built on RDNA 4.0 architecture, manufactured on a 4 nm process at TSMC. NVIDIA uses the AD104 chip with Ada Lovelace architecture, manufactured on a 5 nm process, also at TSMC. The AMD chip packs 53,900 million transistors into a 357 mm² die, giving a transistor density of 151.0M per mm². The NVIDIA chip has 35,800 million transistors on a 294 mm² die, for a density of 121.8M per mm².
The AMD die is 21% larger in area and holds 51% more transistors. A denser 4 nm process explains part of that gap. The AMD card belongs to the Radeon Pro Navi (Navi IV Series) generation, positioning it as a workstation-oriented product, while the NVIDIA card sits in the GeForce 40 series consumer lineup. The NVIDIA predecessor is GeForce 30 and its successor is GeForce 50, confirming a consumer lifecycle. The AMD predecessor is Radeon Pro Vega, and no successor is recorded.
Core configuration differs significantly. The AMD card has 3072 shading units, 192 texture mapping units, and 96 ROPs. The NVIDIA card has 5888 shading units, 184 TMUs, and 64 ROPs. NVIDIA leads in shader count by 92% and texture rate at 455.4 GTexel/s versus 387.8 GTexel/s, a 17% advantage. AMD leads in ROP count by 50% and pixel rate at 193.9 GPixel/s versus 158.4 GPixel/s, a 22% advantage. Ray tracing cores are close: 48 on AMD, 46 on NVIDIA. Tensor cores exist only on NVIDIA at 184, a feature absent from the AMD specification sheet.
Clock behavior also diverges. The NVIDIA card runs a base clock of 1920 MHz and a boost clock of 2475 MHz. The AMD card runs 1080 MHz base and 2020 MHz boost. NVIDIA's boost clock is 23% higher. Memory clocks show NVIDIA at 2500 MHz (20 Gbps effective) versus AMD at 2250 MHz (18 Gbps effective), but the AMD card's wider 256-bit bus compensates with higher total bandwidth.
Head-to-Head Benchmarks
Direct head-to-head benchmark results are not recorded in the database. The only hard measurement available is the NVIDIA GeForce RTX 4070 GDDR6's 3DMark Steel Nomad DX12 score of 4334.5, with an average benchmark score of 4335 across the database. The AMD Radeon AI PRO 9600D has no benchmark entries, so no direct comparison can be drawn from measured performance.
The NVIDIA card's percentile rank against all GPUs is 25, meaning it sits above the bottom quarter of recorded hardware. Its nearest rivals in the database are all older or lower-tier parts: the Intel Iris Pro Graphics 5200 scores 4360 (0.6% above the RTX 4070), the AMD FirePro W2100 scores 4295 (0.9% below), the NVIDIA GeForce 930M scores 4388 (1.2% above), and the NVIDIA GeForce GTX 460M scores 4282 (1.2% below). These deltas are all within 1.2%, which suggests the Steel Nomad workload does not differentiate strongly among these particular entries, or that the database sample for this card is thin.
Without AMD benchmark data, the comparison falls to specification-derived metrics. The NVIDIA card's FP32 output of 29.15 TFLOPS exceeds the AMD card's 24.82 TFLOPS by 17.4%. The AMD card's texture rate of 387.8 GTexel/s trails NVIDIA's 455.4 GTexel/s by 14.8%. The AMD card's pixel rate of 193.9 GPixel/s beats NVIDIA's 158.4 GPixel/s by 22.4%. Memory bandwidth favors AMD at 576.0 GB/s versus 480.0 GB/s, a 20% margin. The AMD card also handles FP16 at the same rate as FP32 at 24.82 TFLOPS, a 1:1 ratio, identical to NVIDIA's 1:1 ratio at 29.15 TFLOPS.
The power envelope is a decisive differentiator. AMD's 150 W TDP versus NVIDIA's 200 W TDP means the AMD card delivers its 24.82 TFLOPS at a lower power draw, while the NVIDIA card needs 33% more power to reach its higher throughput. The suggested PSU rating reflects this: 450 W for AMD, 550 W for NVIDIA.
The Verdict
The recorded data supports a clear split. The NVIDIA GeForce RTX 4070 GDDR6 is the stronger raw compute card in terms of FP32 throughput, shader count, texture rate, and tensor core availability. Its 29.15 TFLOPS and 5888 shading units give it a measurable arithmetic lead, and the 184 tensor cores open up AI-accelerated features that the AMD card cannot match. The single recorded benchmark score of 4334.5 in 3DMark Steel Nomad DX12, while modest relative to its nearest rivals, is the only measured performance data in the database.
The AMD Radeon AI PRO 9600D is the memory-capacity and memory-bandwidth leader. Its 32 GB frame buffer is the kind of resource that matters for large datasets, high-resolution textures, or workloads that exceed 12 GB. The 576.0 GB/s bandwidth and 193.9 GPixel/s pixel rate indicate strong memory-bound and fill-rate-bound performance. The 150 W TDP, single-slot form factor, and 450 W suggested PSU make it the lower-power, lower-space option. The card also uses PCIe 5.0 x16, a generation ahead of the NVIDIA card's PCIe 4.0 x16.
The production status differs as well. The AMD card is marked Active, meaning it is currently in production. The NVIDIA card is marked End-of-life, with a successor already listed as GeForce 50. The NVIDIA card has a recorded launch MSRP of 599 USD.
For buyers choosing between these two, the data points to the NVIDIA card for general compute throughput, shader-heavy rendering, and tensor-based workloads. The AMD card is the choice where memory capacity, memory bandwidth, fill rate, and power draw take priority. The absence of benchmark scores for the AMD card means the performance comparison is provisional, based on architecture and specifications rather than measured results.
FAQ
Q: Which card has more memory?
A: The AMD Radeon AI PRO 9600D has 32 GB of GDDR6 memory, compared to 12 GB on the NVIDIA GeForce RTX 4070 GDDR6.
Q: Which card has higher FP32 compute throughput?
A: The NVIDIA GeForce RTX 4070 GDDR6 delivers 29.15 TFLOPS of FP32 performance, while the AMD Radeon AI PRO 9600D delivers 24.82 TFLOPS.
Q: Does either card include tensor cores?
A: The NVIDIA GeForce RTX 4070 GDDR6 has 184 tensor cores. The AMD Radeon AI PRO 9600D specification lists no tensor cores.
Q: What is the power draw difference?
A: The AMD Radeon AI PRO 9600D has a 150 W TDP with a 450 W suggested PSU. The NVIDIA GeForce RTX 4070 GDDR6 has a 200 W TDP with a 550 W suggested PSU.
Q: What is the only recorded benchmark score?
A: The NVIDIA GeForce RTX 4070 GDDR6 scores 4334.5 in 3DMark Steel Nomad DX12, with an average benchmark score of 4335. The AMD card has no recorded benchmark entries.
Q: Which card uses a newer PCIe interface?
A: The AMD Radeon AI PRO 9600D uses PCIe 5.0 x16. The NVIDIA GeForce RTX 4070 GDDR6 uses PCIe 4.0 x16.
Specification Differences
| Specification | AMD Radeon AI PRO 9600D | NVIDIA GeForce RTX 4070 GDDR6 |
|---|---|---|
| Architecture | RDNA 4.0 | Ada Lovelace |
| Process node | 4 nm | 5 nm |
| Transistors | 53,900 million | 35,800 million |
| Die size | 357 mm² | 294 mm² |
| Transistor density | 151.0M / mm² | 121.8M / mm² |
| Base clock | 1080 MHz | 1920 MHz |
| Boost clock | 2020 MHz | 2475 MHz |
| Memory clock | 2250 MHz, 18 Gbps effective | 2500 MHz, 20 Gbps effective |
| Memory size | 32 GB | 12 GB |
| Memory bus width | 256 bit | 192 bit |
| Memory bandwidth | 576.0 GB/s | 480.0 GB/s |
| Shading units | 3072 | 5888 |
| TMUs | 192 | 184 |
| ROPs | 96 | 64 |
| Ray tracing cores | 48 | 46 |
| Tensor cores | None | 184 |
| Pixel rate | 193.9 GPixel/s | 158.4 GPixel/s |
| Texture rate | 387.8 GTexel/s | 455.4 GTexel/s |
| FP32 | 24.82 TFLOPS | 29.15 TFLOPS |
| FP16 | 24.82 TFLOPS (1:1) | 29.15 TFLOPS (1:1) |
| TDP | 150 W | 200 W |
| Slot width | Single-slot | Dual-slot |
| Suggested PSU | 450 W | 550 W |
| Bus interface | PCIe 5.0 x16 | PCIe 4.0 x16 |
| Display outputs | 1x DisplayPort 2.1a | 1x HDMI 2.1, 3x DisplayPort 1.4a |
| Dimensions | 241 mm x 111 mm x 19 mm | 240 mm x 110 mm x 40 mm |
| Production status | Active | End-of-life |
| Release date | 2025-12-10 | 2024-08-19 |
| Predecessor | Radeon Pro Vega | GeForce 30 |
| Successor | None | GeForce 50 |