AMD Radeon AI PRO 9600D vs NVIDIA GeForce RTX 5060 GB205 Comparison

AMD
RADEON

AMD Radeon AI PRO 9600D

CORE STATE Navi 48
VRAM 32 GB
CLOCK SPEED 2020 MHz
TDP 150 W
BUS WIDTH 256 bit
ARCHITECTURE RDNA 4.0
nm
PROCESS 4 nm
LAUNCH DATE 2025
VS
NVIDIA
GEFORCE

GeForce RTX 5060 GB205

CORE STATE GB205
VRAM 8 GB
CLOCK SPEED 2497 MHz
TDP 145 W
BUS WIDTH 128 bit
ARCHITECTURE Blackwell 2.0
nm
PROCESS 5 nm
LAUNCH DATE 2026

Analysis: AMD Radeon AI PRO 9600D vs NVIDIA GeForce RTX 5060 GB205

Head-to-Head Benchmarks

The recorded database currently lacks direct head-to-head benchmark scores for the AMD Radeon AI PRO 9600D and the NVIDIA GeForce RTX 5060 GB205, so the comparison must be drawn from their architectural specifications and derived performance metrics. The AMD part shows a clear advantage in raw compute throughput. Its FP32 rating of 24.82 TFLOPS stands about 29% above the NVIDIA card's 19.18 TFLOPS, a meaningful gap for compute-heavy workloads. The texture rate follows a similar pattern, with AMD delivering 387.8 GTexel/s against NVIDIA's 299.6 GTexel/s, a lead of roughly 29%. Pixel throughput also favors AMD at 193.9 GPixel/s versus 119.9 GPixel/s, which is about 62% higher, indicating a substantial edge in fill-rate-bound scenarios.

Memory bandwidth is another area where the AMD card pulls ahead, though by a smaller margin. The 576.0 GB/s figure compares to 448.0 GB/s for the NVIDIA card, a difference of about 29%. The AMD card also carries four times the memory capacity, 32 GB versus 8 GB, which matters for large datasets and multi-application workflows. Clock speeds tell the opposite story. The NVIDIA card runs a base clock of 2280 MHz and a boost clock of 2497 MHz, whereas the AMD part operates at 1080 MHz base and 2020 MHz boost. Higher clocks do not translate into higher throughput here because the AMD card compensates with a wider memory bus and more texture units.

Shader counts also differ. The NVIDIA card has 3840 shading units against AMD's 3072, yet AMD still produces higher FP32 output due to its architecture design. The NVIDIA card counters with 120 tensor cores, a feature the AMD part lacks entirely, and 30 RT cores versus AMD's 48. The RT core count favors AMD numerically, but the NVIDIA tensor cores provide dedicated hardware for AI acceleration that the AMD card cannot match on paper.

Architecture Differences

The two cards come from different design philosophies and manufacturing processes. AMD uses the Navi 48 chip built on RDNA 4.0 architecture, fabricated by TSMC at 4 nm. NVIDIA's GB205 chip uses Blackwell 2.0 architecture, also from TSMC but at 5 nm. The process node difference gives AMD a density advantage: 151.0 million transistors per square millimeter versus 118.3 million. Total transistor counts reflect this: AMD packs 53,900 million transistors onto a 357 mm² die, while NVIDIA fits 31,100 million onto a 263 mm² die. The AMD die is larger by about 36%, but it carries roughly 73% more transistors.

Memory technology diverges as well. AMD uses GDDR6 with a 256-bit bus, while NVIDIA uses GDDR7 on a 128-bit bus. The wider bus lets AMD reach 576.0 GB/s despite a lower memory clock of 2250 MHz, while NVIDIA achieves 448.0 GB/s from a higher 1750 MHz clock (28 Gbps effective). The capacity gap is stark: 32 GB versus 8 GB.

The compute pipelines differ in structure. AMD allocates 192 texture mapping units and 96 raster operations units, while NVIDIA uses 120 TMUs and 48 ROPs. RT core counts are 48 for AMD and 30 for NVIDIA. NVIDIA adds 120 tensor cores where AMD has none. Both support DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4, so API coverage is identical.

Physical and power characteristics also separate the two. AMD is a single-slot card drawing 150 W with a 1x 16-pin power connector and a suggested 450 W PSU. NVIDIA is a dual-slot card drawing 145 W with a 1x 8-pin connector and a suggested 300 W PSU. Both use PCIe 5.0, but AMD runs x16 while NVIDIA runs x8. Display outputs differ: AMD offers one DisplayPort 2.1a, while NVIDIA provides one HDMI 2.1b and three DisplayPort 2.1b ports. Both cards measure 241 mm in length and 111 mm in height, but the AMD card is 19 mm wide versus NVIDIA's 40 mm.

Where Each One Wins

The AMD Radeon AI PRO 9600D wins in scenarios that demand high raw compute and memory capacity. Its 24.82 TFLOPS FP32 output leads NVIDIA's 19.18 TFLOPS by a clear margin, making it the stronger choice for general-purpose GPU compute, scientific simulation, and rendering tasks that scale with shader throughput. The 32 GB memory capacity is a decisive factor for workloads that exceed 8 GB, such as large language model inference, complex 3D scene rendering, or multi-application data processing. The pixel rate advantage of 193.9 GPixel/s versus 119.9 GPixel/s also favors AMD for rasterization-heavy tasks where fill rate is the bottleneck.

The NVIDIA GeForce RTX 5060 GB205 wins where its feature set applies. The 120 tensor cores give it a dedicated path for AI acceleration, machine learning inference, and tensor-based operations that the AMD card cannot perform with specialized hardware. The higher base and boost clocks, 2280 MHz and 2497 MHz, suggest better responsiveness in lightly threaded or latency-sensitive tasks. The dual-slot design and lower power draw of 145 W with a 300 W PSU recommendation make it easier to fit into smaller systems. The display output configuration, with one HDMI 2.1b and three DisplayPort 2.1b ports, offers more connection flexibility for multi-monitor setups compared to AMD's single DisplayPort 2.1a.

The NVIDIA card also holds an advantage in memory technology generational terms, using GDDR7 rather than GDDR6, though the practical bandwidth difference still favors AMD. The 448.0 GB/s bandwidth is about 22% lower than AMD's 576.0 GB/s, so NVIDIA's memory advantage is limited to capacity efficiency, not raw throughput.

FAQ

Q: Which card has higher FP32 compute performance?

A: The AMD Radeon AI PRO 9600D delivers 24.82 TFLOPS, which is about 29% higher than the NVIDIA GeForce RTX 5060 GB205's 19.18 TFLOPS.

Q: How much memory does each card have, and what type?

A: The AMD card has 32 GB of GDDR6 on a 256-bit bus, while the NVIDIA card has 8 GB of GDDR7 on a 128-bit bus.

Q: What is the memory bandwidth difference?

A: AMD reaches 576.0 GB/s, while NVIDIA reaches 448.0 GB/s, giving AMD a roughly 29% higher bandwidth figure.

Q: Does the NVIDIA card have tensor cores?

A: Yes, the NVIDIA GeForce RTX 5060 GB205 includes 120 tensor cores. The AMD Radeon AI PRO 9600D has no tensor cores listed.

Q: What are the power requirements for each card?

A: The AMD card has a 150 W TDP with a suggested 450 W PSU and a 1x 16-pin connector. The NVIDIA card has a 145 W TDP with a suggested 300 W PSU and a 1x 8-pin connector.

Q: Which card uses a newer process node?

A: The AMD card uses a 4 nm TSMC process, while the NVIDIA card uses a 5 nm TSMC process.

Specification Differences

The two cards differ across nearly every major specification category. The process node is 4 nm for AMD and 5 nm for NVIDIA. Transistor counts are 53,900 million versus 31,100 million, with die sizes of 357 mm² and 263 mm². The base clock is 1080 MHz for AMD and 2280 MHz for NVIDIA; boost clocks are 2020 MHz and 2497 MHz respectively. Memory size is 32 GB versus 8 GB, with GDDR6 versus GDDR7 types. Bus width is 256-bit for AMD and 128-bit for NVIDIA. Bandwidth is 576.0 GB/s versus 448.0 GB/s.

Shading units are 3072 for AMD and 3840 for NVIDIA. TMUs are 192 versus 120, and ROPs are 96 versus 48. RT cores are 48 versus 30, with NVIDIA adding 120 tensor cores. Pixel rate is 193.9 GPixel/s versus 119.9 GPixel/s, and texture rate is 387.8 GTexel/s versus 299.6 GTexel/s. FP32 is 24.82 TFLOPS versus 19.18 TFLOPS, with both offering FP16 at a 1:1 ratio.

TDP is 150 W versus 145 W. Slot width is single-slot for AMD and dual-slot for NVIDIA. Power connectors are 1x 16-pin versus 1x 8-pin, with suggested PSUs of 450 W and 300 W. Bus interface is PCIe 5.0 x16 versus PCIe 5.0 x8. Display outputs are 1x DisplayPort 2.1a versus 1x HDMI 2.1b plus 3x DisplayPort 2.1b. Dimensions match in length and height at 241 mm and 111 mm, but width differs at 19 mm versus 40 mm. The release dates are 2025-12-10 for AMD and 2026-05-31 for NVIDIA. The NVIDIA card has a launch MSRP of 299 USD.

The Verdict

The data indicates a clear split based on workload type. The AMD Radeon AI PRO 9600D is the stronger choice for compute-intensive tasks that leverage its higher FP32 throughput, larger memory pool, and wider memory bus. Its 24.82 TFLOPS FP32 output, 32 GB capacity, and 576.0 GB/s bandwidth position it for rendering, simulation, and large-data processing. The single-slot design and 150 W TDP also make it a compact option for workstations.

The NVIDIA GeForce RTX 5060 GB205 suits users who need tensor core acceleration for AI workloads, given its 120 tensor cores. Its higher clock speeds and lower power draw of 145 W make it efficient for gaming and light compute. The 8 GB memory capacity is a limiting factor for large datasets, but the GDDR7 type and dual-slot form factor offer a different trade-off. The NVIDIA card also provides more display outputs, with one HDMI and three DisplayPort connections.

Benchmark results show no direct head-to-head scores, so the verdict rests on specification analysis. The AMD card leads in throughput and capacity metrics, while the NVIDIA card leads in clock speed, tensor core availability, and power efficiency. Buyers prioritizing raw compute and memory should select the AMD part. Those needing AI acceleration or multi-display connectivity should select the NVIDIA part. The 299 USD launch MSRP for the NVIDIA card is the only price information available in the database.

DETAILED SPECIFICATIONS

SPECIFICATION
AI PRO 9600D
RTX 5060 GB205
Core Specs
Shading Units
3,072
3,840 +25.0%
Shaders
3,072
3,840 +25.0%
TMUs
192
120 -37.5%
ROPs
96
48 -50.0%
Compute Units
48
—
SM Count
—
30
Clocks
Base Clock
1080 MHz
2280 MHz
Boost Clock
2020 MHz
2497 MHz
Game Clock
1080 MHz
—
Memory Clock
2250 MHz 18 Gbps effective
1750 MHz 28 Gbps effective
Memory
Memory Size
32 GB
8 GB
VRAM (MB)
32,768
8,192 -75.0%
Memory Type
GDDR6
GDDR7
Memory Bus
256 bit
128 bit
Bandwidth
576.0 GB/s
448.0 GB/s
Cache
L1 Cache
—
128 KB (per SM)
L2 Cache
8 MB
32 MB
L3 Cache
48 MB
—
L0 Cache
32 KB per WGP
—
Performance
Pixel Rate
193.9 GPixel/s
119.9 GPixel/s
Texture Rate
387.8 GTexel/s
299.6 GTexel/s
FP32 (TFLOPS)
24.82 TFLOPS
19.18 TFLOPS
FP64 (TFLOPS)
775.7 GFLOPS (1:32)
299.6 GFLOPS (1:64)
FP16 (TFLOPS)
24.82 TFLOPS (1:1)
19.18 TFLOPS (1:1)
AI/RT
RT Cores
48
30 -37.5%
Tensor Cores
—
120
Matrix Cores
96
—
Power
TDP
150 W
145 W
TDP (W)
150
145 -3.3%
Suggested PSU
450 W
300 W
Power Connectors
1x 16-pin
1x 8-pin
Architecture
Architecture
RDNA 4.0
Blackwell 2.0
GPU Name
Navi 48
GB205
Generation
Radeon Pro Navi (Navi IV Series)
GeForce 50
Process Size
4 nm
5 nm
Transistors
53,900 million
31,100 million
Die Size
357 mm²
263 mm²
Foundry
TSMC
TSMC
Density
151.0M / mm²
118.3M / mm²
API Support
DirectX
12 Ultimate (12_2)
12 Ultimate (12_2)
OpenGL
4.6
4.6
Vulkan
1.4
1.4
OpenCL
2.2
3.0
CUDA
—
12.0
Shader Model
6.9
6.9
Physical
Slot Width
Single-slot
Dual-slot
Length
241 mm 9.5 inches
241 mm 9.5 inches
Height
111 mm 4.4 inches
111 mm 4.4 inches
Outputs
1x DisplayPort 2.1a
1x HDMI 2.1b3x DisplayPort 2.1b
Bus Interface
PCIe 5.0 x16
PCIe 5.0 x8
Other
Launch Price
—
299 USD
Production
Active
Active
Predecessor
Radeon Pro Vega
GeForce 40
Successor
—
GeForce 60
View Radeon AI PRO 9600D Details View GeForce RTX 5060 GB205 Details