AMD Radeon 890M vs NVIDIA GeForce RTX 4060 Ti AD104 Comparison

AMD
RADEON

AMD Radeon 890M

CORE STATE Strix Point
VRAM System Shared
CLOCK SPEED 2900 MHz
TDP 15 W
BUS WIDTH System Shared
ARCHITECTURE RDNA 3.5
nm
PROCESS 4 nm
LAUNCH DATE 2024
VS
NVIDIA
GEFORCE

GeForce RTX 4060 Ti AD104

CORE STATE AD104
VRAM 8 GB
CLOCK SPEED 2535 MHz
TDP 160 W
BUS WIDTH 128 bit
ARCHITECTURE Ada Lovelace
nm
PROCESS 5 nm
LAUNCH DATE 2024

PERFORMANCE BENCHMARKS

3dmark_3dmark_steel_nomad_dx12
590
N/A
geekbench_opencl
37,254
N/A
geekbench_vulkan
40,808
N/A
passmark_directx_10
33
N/A
passmark_directx_11
73
N/A
passmark_directx_12
37
N/A
passmark_directx_9
97
N/A
passmark_g2d
979
N/A
passmark_g3d
8,076
N/A
passmark_gpu_compute
4,157
N/A

Analysis: AMD Radeon 890M vs NVIDIA GeForce RTX 4060 Ti AD104

Where Each One Wins

The recorded data splits these two parts sharply across different workloads and performance classes. The AMD Radeon 890M, an integrated graphics processor built on the Strix Point chip, carries a full set of benchmark scores from the database. Its strongest showing comes in compute-oriented tests: the Geekbench Vulkan score reaches 40,808 and the OpenCL score sits at 37,254, while the PassMark GPU compute result is 4,157. These numbers place the 890M at the 45th percentile among all GPUs in the database, with an average benchmark score of 9,210.

The NVIDIA GeForce RTX 4060 Ti AD104, by contrast, has no recorded benchmark scores in the database. Its percentile ranking against all GPUs is 50, and its average benchmark score is listed as zero. This means the direct comparison of measured results is one-sided: the 890M has concrete numbers across multiple test suites, while the RTX 4060 Ti AD104 offers no benchmark entries to compare against. The head-to-head benchmark list is empty, and the win counts for both parts are zero. So the "where each one wins" question cannot be answered with measured scores for the NVIDIA part; the data only supports the AMD part's recorded performance profile.

Within the 890M's own results, the pattern shows a clear split between legacy and modern workloads. The PassMark DirectX 9 score of 97 and DirectX 11 score of 73 indicate stronger performance in older API titles, while the DirectX 12 score drops to 37 and the DirectX 10 score falls to 33. The 3DMark Steel Nomad DX12 test returns 590, which is a low result compared to dedicated graphics cards but consistent with an integrated solution. The PassMark G3D score of 8,076 and G2D score of 979 round out the picture. For the RTX 4060 Ti AD104, the absence of benchmark data means the database cannot confirm any workload-specific advantage. Its specification sheet indicates a much larger shader count, higher clock speeds, and dedicated memory, but without recorded scores, those cannot be translated into measured wins.

The Verdict

The data supports a clear separation: the AMD Radeon 890M is a measured, functioning integrated GPU with a complete benchmark profile, while the NVIDIA GeForce RTX 4060 Ti AD104 is a discrete card whose benchmark results are absent from the database. For a user choosing based on recorded data, the 890M delivers verified performance in compute and legacy graphics tests. Its average score of 9,210 places it near the AMD Radeon Vega 8 (average 9,221, delta -0.1%), the NVIDIA GeForce GTX 960 (average 9,273, delta -0.7%), the NVIDIA GeForce GTX 465 (average 9,294, delta -0.9%), and the NVIDIA GeForce GTX 850M (average 9,302, delta -1%). These deltas are all within a single percentage point, meaning the 890M performs essentially on par with those older or lower-tier discrete parts in the database's aggregate scoring.

The RTX 4060 Ti AD104 cannot be evaluated on the same basis because the database lists no scores for it. Its 50th percentile ranking is the only performance indicator, and that is not tied to any measured test result. The verdict from the data is straightforward: if the requirement is verified benchmark performance, the 890M is the only part with evidence. If the requirement is a discrete GPU with a larger specification footprint, the RTX 4060 Ti AD104 has the hardware credentials but no recorded performance to confirm them. The database treats the two as non-comparable in head-to-head terms, and the empty win counts reflect that.

Head-to-Head Benchmarks

The head-to-head benchmark section in the database contains no entries. There are no recorded test results that pit the AMD Radeon 890M directly against the NVIDIA GeForce RTX 4060 Ti AD104. The wins count for both parts is zero. This is not a case of close scores; it is a complete absence of paired measurements. The only comparative data available comes from the 890M's nearest rivals list, which includes integrated and older discrete GPUs, not the RTX 4060 Ti AD104.

For the 890M, the nearest rival comparisons show how tight the margins are. Against the AMD Radeon Vega 8, the 890M trails by 0.1% in average score. Against the NVIDIA GeForce GTX 960, it trails by 0.7%. Against the GTX 465 and GTX 850M, the deltas are -0.9% and -1%, respectively. These are all sub-one-percent differences, indicating that the 890M sits in a crowded performance band. Its own benchmark spread tells the rest of the story: the Geekbench Vulkan result of 40,808 is more than three times the OpenCL score of 37,254 in absolute terms, though both are compute-oriented. The PassMark G3D score of 8,076 dwarfs the DirectX 12 score of 37, which suggests the 890M excels in older or less demanding graphics workloads rather than modern DX12 titles. The 3DMark Steel Nomad DX12 score of 590 is the lowest single result, reinforcing that pattern.

Without any head-to-head data for the RTX 4060 Ti AD104, the analysis cannot walk through specific wins in either direction. The database simply has no paired measurements to report. The only quantitative comparison available is the 890M's aggregate position versus its four named rivals, none of which is the NVIDIA part in question.

FAQ

Q: Does the AMD Radeon 890M have any benchmark scores in the database?

A: Yes. The 890M has ten recorded scores: 3DMark Steel Nomad DX12 at 590, Geekbench OpenCL at 37,254, Geekbench Vulkan at 40,808, PassMark DirectX 10 at 33, DirectX 11 at 73, DirectX 12 at 37, DirectX 9 at 97, G2D at 979, G3D at 8,076, and GPU compute at 4,157.

Q: Does the NVIDIA GeForce RTX 4060 Ti AD104 have any benchmark scores in the database?

A: No. The benchmark list for the RTX 4060 Ti AD104 is empty, and its average benchmark score is listed as zero. Its percentile ranking is 50, but no measured test results are recorded.

Q: How does the 890M compare to its nearest rivals in average score?

A: The 890M has an average benchmark score of 9,210. The AMD Radeon Vega 8 averages 9,221 (delta -0.1%), the NVIDIA GeForce GTX 960 averages 9,273 (delta -0.7%), the GTX 465 averages 9,294 (delta -0.9%), and the GTX 850M averages 9,302 (delta -1%).

Q: What is the 890M's strongest benchmark result?

A: The highest recorded score for the 890M is the Geekbench Vulkan result of 40,808. The Geekbench OpenCL score of 37,254 is the second highest.

Q: What is the 890M's weakest benchmark result?

A: The lowest recorded score is the PassMark DirectX 10 result of 33. The PassMark DirectX 12 score of 37 and the 3DMark Steel Nomad DX12 score of 590 are also low.

Q: Is there any head-to-head data between the 890M and the RTX 4060 Ti AD104?

A: No. The head-to-head benchmark list is empty, and the win counts for both parts are zero. The database provides no paired measurements for these two GPUs.

Architecture Differences

The AMD Radeon 890M uses the Strix Point chip with RDNA 3.5 architecture, fabricated on a 4 nm process at TSMC. The transistor count is 34,000 million on a die size of 233 mm², giving a transistor density of 145.9M per mm². It is classified as part of the Navi III IGP generation for Strix Point Mobile. The GPU has 1,024 shading units, 64 texture mapping units, 32 raster output units, and 16 ray tracing cores. It has no tensor cores listed. The base clock is 400 MHz and the boost clock reaches 2,900 MHz. The memory subsystem is system shared, meaning size, type, bus width, and bandwidth are all dependent on the host system. The pixel rate is 92.80 GPixel/s, the texture rate is 185.6 GTexel/s, and FP32 performance is 5.939 TFLOPS. FP16 is also 5.939 TFLOPS at a 1:1 ratio.

The NVIDIA GeForce RTX 4060 Ti AD104 uses the AD104 chip with Ada Lovelace architecture, fabricated on a 5 nm process at TSMC. The transistor count is 35,800 million on a die size of 294 mm², giving a transistor density of 121.8M per mm². It belongs to the GeForce 40 generation. The GPU has 4,352 shading units, 136 texture mapping units, 48 raster output units, 34 ray tracing cores, and 136 tensor cores. The base clock is 2,310 MHz and the boost clock is 2,535 MHz. Memory is 8 GB of GDDR6 on a 128-bit bus, with a bandwidth of 288.0 GB/s and a memory clock of 2,250 MHz (18 Gbps effective). The pixel rate is 121.7 GPixel/s, the texture rate is 344.8 GTexel/s, and FP32 performance is 22.06 TFLOPS. FP16 is also 22.06 TFLOPS at a 1:1 ratio.

The architecture differences are substantial. The 890M is an integrated GPU with no dedicated memory, relying on system shared memory. The RTX 4060 Ti AD104 is a discrete card with 8 GB of GDDR6. The RTX part has more than four times the shading units, more than double the texture units, and more than double the ray tracing cores. It also includes tensor cores, which the 890M lacks. The process nodes differ: 4 nm for the AMD part versus 5 nm for the NVIDIA part, though both use TSMC. The transistor counts are close (34,000 million versus 35,800 million), but the die sizes differ (233 mm² versus 294 mm²), resulting in a higher transistor density for the AMD chip.

Specification Differences

The specification differences between the two parts are extensive. The 890M has a base clock of 400 MHz and a boost clock of 2,900 MHz. The RTX 4060 Ti AD104 has a base clock of 2,310 MHz and a boost clock of 2,535 MHz. The NVIDIA part runs at a higher base clock but a lower boost clock than the AMD part. Memory differs completely: the 890M uses system shared memory with no fixed size, type, bus width, or bandwidth, while the RTX part uses 8 GB of GDDR6 on a 128-bit bus with 288.0 GB/s bandwidth.

The shader configuration is heavily in favor of the NVIDIA part. The 890M has 1,024 shading units, 64 TMUs, 32 ROPs, and 16 RT cores. The RTX 4060 Ti AD104 has 4,352 shading units, 136 TMUs, 48 ROPs, and 34 RT cores. The RTX part also has 136 tensor cores, while the 890M has none. Pixel rate is 92.80 GPixel/s for the 890M versus 121.7 GPixel/s for the RTX part. Texture rate is 185.6 GTexel/s versus 344.8 GTexel/s. FP32 performance is 5.939 TFLOPS versus 22.06 TFLOPS, a roughly 3.7x difference. FP16 follows the same ratio at 5.939 TFLOPS versus 22.06 TFLOPS.

The TDP differs by a wide margin: 15 W for the 890M versus 160 W for the RTX 4060 Ti AD104. The 890M is an IGP with no power connectors and a slot width of "IGP". The RTX part is dual-slot with a single 16-pin power connector and a suggested PSU of 450 W. The 890M uses a PCIe 4.0 x8 bus interface; the RTX part also uses PCIe 4.0 x8. Display outputs are portable device dependent for the 890M, while the RTX part has 1x HDMI 2.1 and 3x DisplayPort 1.4a. Physical dimensions are absent for the 890M, but the RTX part measures 240 mm in length, 111 mm in height, and 40 mm in width. Production status differs: the 890M is active, while the RTX 4060 Ti AD104 is end-of-life. The release dates are 2024-07-14 for the AMD part and 2024-03-31 for the NVIDIA part. The RTX part has a launch MSRP of 399 USD, which is stated once here per the data. The predecessor and successor fields also differ: the 890M lists "Navi II IGP" as predecessor with no successor, while the RTX part lists "GeForce 30" as predecessor and "GeForce 50" as successor. Both support DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4.

DETAILED SPECIFICATIONS

SPECIFICATION
890M
RTX 4060 Ti AD104
Core Specs
Shading Units
1,024
4,352 +325.0%
Shaders
1,024
4,352 +325.0%
TMUs
64
136 +112.5%
ROPs
32
48 +50.0%
Compute Units
16
—
SM Count
—
34
Clocks
Base Clock
400 MHz
2310 MHz
Boost Clock
2900 MHz
2535 MHz
Memory Clock
System Shared
2250 MHz 18 Gbps effective
Memory
Memory Size
System Shared
8 GB
VRAM (MB)
—
8,192
Memory Type
System Shared
GDDR6
Memory Bus
System Shared
128 bit
Bandwidth
System Dependent
288.0 GB/s
Cache
L1 Cache
128 KB per Array
128 KB (per SM)
L2 Cache
2 MB
32 MB
L0 Cache
32 KB per WGP
—
Performance
Pixel Rate
92.80 GPixel/s
121.7 GPixel/s
Texture Rate
185.6 GTexel/s
344.8 GTexel/s
FP32 (TFLOPS)
5.939 TFLOPS
22.06 TFLOPS
FP64 (TFLOPS)
371.2 GFLOPS (1:16)
344.8 GFLOPS (1:64)
FP16 (TFLOPS)
5.939 TFLOPS (1:1)
22.06 TFLOPS (1:1)
AI/RT
RT Cores
16
34 +112.5%
Tensor Cores
—
136
Power
TDP
15 W
160 W
TDP (W)
15
160 +966.7%
Suggested PSU
—
450 W
Power Connectors
None
1x 16-pin
Architecture
Architecture
RDNA 3.5
Ada Lovelace
GPU Name
Strix Point
AD104
Generation
Navi III IGP (Strix Point Mobile)
GeForce 40
Process Size
4 nm
5 nm
Transistors
34,000 million
35,800 million
Die Size
233 mm²
294 mm²
Foundry
TSMC
TSMC
Density
145.9M / mm²
121.8M / mm²
API Support
DirectX
12 Ultimate (12_2)
12 Ultimate (12_2)
OpenGL
4.6
4.6
Vulkan
1.4
1.4
OpenCL
2.1
3.0
CUDA
—
8.9
Shader Model
6.8
6.9
Physical
Slot Width
IGP
Dual-slot
Length
—
240 mm 9.4 inches
Height
—
111 mm 4.4 inches
Outputs
Portable Device Dependent
1x HDMI 2.13x DisplayPort 1.4a
Bus Interface
PCIe 4.0 x8
PCIe 4.0 x8
Other
Launch Price
—
399 USD
Production
Active
End-of-life
Predecessor
Navi II IGP
GeForce 30
Successor
—
GeForce 50
View Radeon 890M Details View GeForce RTX 4060 Ti AD104 Details