AMD Radeon 880M vs NVIDIA GeForce RTX 4060 Ti AD104 Comparison

AMD
RADEON

AMD Radeon 880M

CORE STATE Strix Point
VRAM System Shared
CLOCK SPEED 2900 MHz
TDP 15 W
BUS WIDTH System Shared
ARCHITECTURE RDNA 3.5
nm
PROCESS 4 nm
LAUNCH DATE 2024
VS
NVIDIA
GEFORCE

GeForce RTX 4060 Ti AD104

CORE STATE AD104
VRAM 8 GB
CLOCK SPEED 2535 MHz
TDP 160 W
BUS WIDTH 128 bit
ARCHITECTURE Ada Lovelace
nm
PROCESS 5 nm
LAUNCH DATE 2024

PERFORMANCE BENCHMARKS

3dmark_3dmark_steel_nomad_dx12
535
N/A
geekbench_opencl
31,285
N/A
geekbench_vulkan
40,006
N/A
passmark_directx_10
31
N/A
passmark_directx_11
73
N/A
passmark_directx_12
32
N/A
passmark_directx_9
97
N/A
passmark_g2d
969
N/A
passmark_g3d
7,615
N/A
passmark_gpu_compute
3,719
N/A

Analysis: AMD Radeon 880M vs NVIDIA GeForce RTX 4060 Ti AD104

Head-to-Head Benchmarks

The recorded data presents an unusual comparison: the AMD Radeon 880M has a full set of benchmark scores, while the NVIDIA GeForce RTX 4060 Ti AD104 has no recorded benchmark entries in the database. This means a direct score-by-score comparison is not possible from the available measurements. Instead, the analysis must rely on the 880M's absolute scores, its percentile ranking, and the architectural specifications of both parts.

The AMD Radeon 880M delivers a 3DMark Steel Nomad DX12 score of 535. In Geekbench, it records 31,285 in OpenCL and 40,006 in Vulkan. The Passmark suite shows a G3D score of 7,615, with GPU compute at 3,719. The individual Passmark API tests are modest: DirectX 9 scores 97, DirectX 11 scores 73, DirectX 12 scores 32, and DirectX 10 scores 31. The G2D score is 969. Its average benchmark score across all recorded tests is 8,436.

That average places the 880M at the 43rd percentile of all GPUs in the database. Its nearest rivals confirm the positioning. The NVIDIA GeForce GTX 675MX averages 8,427, which is 0.1% below the 880M. The NVIDIA GeForce MX330 averages 8,458, putting it 0.3% above the 880M. The AMD Radeon HD 8870M also averages 8,458, again 0.3% ahead. The AMD Radeon R9 M375X averages 8,325, which is 1.3% behind the 880M. These deltas are all within a narrow band, indicating the 880M sits in a cluster of older discrete mobile GPUs despite being a modern integrated part.

The RTX 4060 Ti AD104 has no benchmark scores in the database, so its average benchmark score is recorded as zero, and it has no nearest rivals listed. Its percentile ranking is 50, which is higher than the 880M's 43, but without actual scores, that percentile cannot be tied to specific test results. The data simply does not contain a head-to-head benchmark run for these two products.

The Verdict

From the recorded data alone, the AMD Radeon 880M is the only one of the two with measurable benchmark results. It operates as an integrated graphics processor with a 15 W TDP and a boost clock of 2900 MHz. Its 4.454 TFLOPS FP32 throughput and 768 shading units are characteristics of an IGP designed for efficient, portable systems. The 880M's average score of 8,436 and its 43rd percentile ranking show it competing with older discrete mobile parts like the GTX 675MX and MX330, all within a 1.3% range.

The NVIDIA GeForce RTX 4060 Ti AD104 is a fundamentally different product class. It is a dual-slot discrete card with a 160 W TDP, 8 GB of GDDR6 memory on a 128-bit bus, and 288.0 GB/s of bandwidth. Its 22.06 TFLOPS FP32 figure is roughly five times the 880M's 4.454 TFLOPS. It has 4,352 shading units, 136 tensor cores, and 34 ray tracing cores. The RTX 4060 Ti AD104 carries a launch MSRP of 399 USD. Its production status is end-of-life, and its successor is the GeForce 50 series.

The verdict from the data is straightforward: the RTX 4060 Ti AD104 is specified to deliver far higher throughput, but the database contains no benchmark runs to quantify that advantage. The 880M has the only actual scores, and those scores define its position in the lower-middle range of the database. A buyer choosing between an integrated 15 W part and a discrete 160 W card would expect the discrete card to dominate, and the specifications support that expectation, but the absence of RTX 4060 Ti AD104 benchmark data means no measured victory can be awarded.

FAQ

Q: What is the average benchmark score of the AMD Radeon 880M?

A: The AMD Radeon 880M has an average benchmark score of 8,436 across all recorded tests.

Q: Does the NVIDIA GeForce RTX 4060 Ti AD104 have any benchmark scores in the database?

A: No, the RTX 4060 Ti AD104 has an empty benchmark list, and its average benchmark score is recorded as 0.

Q: How does the Radeon 880M compare to its nearest rival, the GeForce GTX 675MX?

A: The Radeon 880M averages 8,436, while the GeForce GTX 675MX averages 8,427, a delta of 0.1% in favor of the 880M.

Q: What is the percentile ranking of each GPU?

A: The Radeon 880M sits at the 43rd percentile of all GPUs, while the RTX 4060 Ti AD104 is at the 50th percentile.

Q: What is the FP32 throughput of each GPU?

A: The Radeon 880M delivers 4.454 TFLOPS FP32, while the RTX 4060 Ti AD104 delivers 22.06 TFLOPS FP32.

Q: Which GPU has a higher boost clock?

A: The Radeon 880M has a boost clock of 2900 MHz, which is higher than the RTX 4060 Ti AD104's boost clock of 2535 MHz.

Specification Differences

The two parts differ in nearly every measurable specification. The Radeon 880M uses a 4 nm process node, while the RTX 4060 Ti AD104 uses a 5 nm node; both are fabricated by TSMC. The 880M contains 34,000 million transistors on a 233 mm² die, giving a transistor density of 145.9M per mm². The RTX 4060 Ti AD104 contains 35,800 million transistors on a 294 mm² die, with a density of 121.8M per mm².

Clock behavior is distinct. The 880M has a base clock of 400 MHz and a boost clock of 2900 MHz. The RTX 4060 Ti AD104 has a base clock of 2310 MHz and a boost clock of 2535 MHz. The memory subsystems are entirely different: the 880M uses system-shared memory with system-dependent bandwidth, while the RTX 4060 Ti AD104 uses 8 GB of GDDR6 on a 128-bit bus with 288.0 GB/s of bandwidth and a memory clock of 2250 MHz (18 Gbps effective).

The compute resources differ sharply. The 880M has 768 shading units, 48 TMUs, 16 ROPs, and 12 ray tracing cores. The RTX 4060 Ti AD104 has 4,352 shading units, 136 TMUs, 48 ROPs, 34 ray tracing cores, and 136 tensor cores. The 880M has no tensor cores listed.

Rates and throughput follow the hardware counts. The 880M produces 46.40 GPixel/s pixel rate and 139.2 GTexel/s texture rate. The RTX 4060 Ti AD104 produces 121.7 GPixel/s and 344.8 GTexel/s. FP32 and FP16 are both 4.454 TFLOPS on the 880M and both 22.06 TFLOPS on the RTX 4060 Ti AD104.

Power and physical design diverge completely. The 880M is an IGP with a 15 W TDP, no power connectors, and no suggested PSU. The RTX 4060 Ti AD104 is a dual-slot card with a 160 W TDP, a single 16-pin power connector, and a suggested PSU of 450 W. Its dimensions are 240 mm by 111 mm by 40 mm. The 880M has no listed dimensions.

Both use PCIe 4.0 x8. The 880M's display outputs are portable-device dependent, while the RTX 4060 Ti AD104 provides 1x HDMI 2.13x DisplayPort 1.4a. Both support DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4.

The 880M was released on 2024-07-14 and is active in production. The RTX 4060 Ti AD104 was released on 2024-03-31 and is end-of-life, with the GeForce 50 as its successor.

Architecture Differences

The Radeon 880M is built on AMD's RDNA 3.5 architecture, with the chip named Strix Point. It belongs to the Navi III IGP generation for Strix Point Mobile. Its predecessor is the Navi II IGP. The RTX 4060 Ti AD104 uses NVIDIA's Ada Lovelace architecture, with the AD104 chip, and belongs to the GeForce 40 generation. Its predecessor is GeForce 30, and its successor is GeForce 50.

The 880M's RDNA 3.5 design is an integrated solution with 12 ray tracing cores and no tensor cores, reflecting a focus on graphics throughput within a 15 W power envelope. The RTX 4060 Ti AD104's Ada Lovelace design includes 34 ray tracing cores and 136 tensor cores, enabling dedicated ray tracing and AI acceleration.

The transistor counts are close, at 34,000 million for the 880M and 35,800 million for the RTX 4060 Ti AD104, but the die sizes differ, with the 880M at 233 mm² and the RTX 4060 Ti AD104 at 294 mm². The 880M achieves a higher transistor density of 145.9M per mm² versus 121.8M per mm², a result of the denser 4 nm process.

Memory architecture is a fundamental split. The 880M shares system memory with no dedicated VRAM, making its bandwidth system-dependent. The RTX 4060 Ti AD104 has dedicated 8 GB GDDR6 memory with 288.0 GB/s bandwidth, a fixed resource independent of the host system.

The API support is identical across both: DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4. The feature sets are the same on paper, but the underlying hardware implementations differ by vendor and architecture.

Where Each One Wins

The Radeon 880M wins on integration and efficiency characteristics. It operates at 15 W, requires no power connectors, and uses system-shared memory, which suits compact portable devices. Its boost clock of 2900 MHz is higher than the RTX 4060 Ti AD104's 2535 MHz. It has a smaller die at 233 mm² and a higher transistor density. In the database, it has actual benchmark scores, including an average of 8,436 and a 43rd percentile ranking, with a 3DMark Steel Nomad DX12 score of 535 and a Geekbench Vulkan score of 40,006.

The RTX 4060 Ti AD104 wins on raw specification counts. It has 4,352 shading units versus 768, 136 TMUs versus 48, 48 ROPs versus 16, 34 ray tracing cores versus 12, and 136 tensor cores versus none. Its FP32 throughput of 22.06 TFLOPS is approximately five times the 880M's 4.454 TFLOPS. Its pixel rate of 121.7 GPixel/s and texture rate of 344.8 GTexel/s are both far above the 880M's 46.40 GPixel/s and 139.2 GTexel/s. It has 8 GB of dedicated GDDR6 memory with 288.0 GB/s bandwidth, compared to the 880M's system-shared memory. It is a dual-slot card with a 160 W TDP and a 16-pin power connector.

In practical terms, the data indicates the 880M is suited to systems where power draw and physical space are constrained, and where the host system's memory bandwidth is adequate. The RTX 4060 Ti AD104 is specified for workloads demanding high fill rates, large dedicated memory pools, and tensor core acceleration, but the database contains no benchmark results to confirm its real-world performance. The 880M is the only part with measured wins, and those wins are against older discrete GPUs within a 1.3% performance band.

DETAILED SPECIFICATIONS

SPECIFICATION
880M
RTX 4060 Ti AD104
Core Specs
Shading Units
768
4,352 +466.7%
Shaders
768
4,352 +466.7%
TMUs
48
136 +183.3%
ROPs
16
48 +200.0%
Compute Units
12
—
SM Count
—
34
Clocks
Base Clock
400 MHz
2310 MHz
Boost Clock
2900 MHz
2535 MHz
Memory Clock
System Shared
2250 MHz 18 Gbps effective
Memory
Memory Size
System Shared
8 GB
VRAM (MB)
—
8,192
Memory Type
System Shared
GDDR6
Memory Bus
System Shared
128 bit
Bandwidth
System Dependent
288.0 GB/s
Cache
L1 Cache
128 KB per Array
128 KB (per SM)
L2 Cache
2 MB
32 MB
L0 Cache
32 KB per WGP
—
Performance
Pixel Rate
46.40 GPixel/s
121.7 GPixel/s
Texture Rate
139.2 GTexel/s
344.8 GTexel/s
FP32 (TFLOPS)
4.454 TFLOPS
22.06 TFLOPS
FP64 (TFLOPS)
278.4 GFLOPS (1:16)
344.8 GFLOPS (1:64)
FP16 (TFLOPS)
4.454 TFLOPS (1:1)
22.06 TFLOPS (1:1)
AI/RT
RT Cores
12
34 +183.3%
Tensor Cores
—
136
Power
TDP
15 W
160 W
TDP (W)
15
160 +966.7%
Suggested PSU
—
450 W
Power Connectors
None
1x 16-pin
Architecture
Architecture
RDNA 3.5
Ada Lovelace
GPU Name
Strix Point
AD104
Generation
Navi III IGP (Strix Point Mobile)
GeForce 40
Process Size
4 nm
5 nm
Transistors
34,000 million
35,800 million
Die Size
233 mm²
294 mm²
Foundry
TSMC
TSMC
Density
145.9M / mm²
121.8M / mm²
API Support
DirectX
12 Ultimate (12_2)
12 Ultimate (12_2)
OpenGL
4.6
4.6
Vulkan
1.4
1.4
OpenCL
2.1
3.0
CUDA
—
8.9
Shader Model
6.8
6.9
Physical
Slot Width
IGP
Dual-slot
Length
—
240 mm 9.4 inches
Height
—
111 mm 4.4 inches
Outputs
Portable Device Dependent
1x HDMI 2.13x DisplayPort 1.4a
Bus Interface
PCIe 4.0 x8
PCIe 4.0 x8
Other
Launch Price
—
399 USD
Production
Active
End-of-life
Predecessor
Navi II IGP
GeForce 30
Successor
—
GeForce 50
View Radeon 880M Details View GeForce RTX 4060 Ti AD104 Details