AMD Radeon 780M vs NVIDIA GeForce RTX 4060 Ti AD104 Comparison

AMD
RADEON

AMD Radeon 780M

CORE STATE Phoenix
VRAM System Shared
CLOCK SPEED 2900 MHz
TDP 15 W
BUS WIDTH System Shared
ARCHITECTURE RDNA 3.0
nm
PROCESS 4 nm
LAUNCH DATE 2024
VS
NVIDIA
GEFORCE

GeForce RTX 4060 Ti AD104

CORE STATE AD104
VRAM 8 GB
CLOCK SPEED 2535 MHz
TDP 160 W
BUS WIDTH 128 bit
ARCHITECTURE Ada Lovelace
nm
PROCESS 5 nm
LAUNCH DATE 2024

PERFORMANCE BENCHMARKS

3dmark_3dmark_steel_nomad_dx12
480
N/A
geekbench_opencl
18,602
N/A
geekbench_vulkan
33,683
N/A

Analysis: AMD Radeon 780M vs NVIDIA GeForce RTX 4060 Ti AD104

Head-to-Head Benchmarks

The recorded data shows a stark contrast between the AMD Radeon 780M and the NVIDIA GeForce RTX 4060 Ti AD104 across the available benchmark suite. The Radeon 780M posts a 3DMark Steel Nomad DX12 score of 480, while the RTX 4060 Ti AD104 has no recorded benchmark scores in the database, leaving the comparison reliant on the AMD IGP's other results and the NVIDIA card's specification sheet.

In Geekbench OpenCL, the Radeon 780M delivers 18,602 points, and in Geekbench Vulkan it reaches 33,683 points. These figures place the integrated graphics solution at the 61st percentile among all GPUs in the database, with an average benchmark score of 17,588. The RTX 4060 Ti AD104 shows an average benchmark score of 0 and a 50th percentile ranking, indicating that no direct measurement data exists for this specific AD104 variant in the database.

The nearest rivals for the Radeon 780M provide context for its positioning. The AMD Radeon Pro 560 averages 17,551 points, a 0.2% difference from the 780M's average. The NVIDIA GeForce RTX 4060, a different card from the RTX 4060 Ti, averages 17,639 points, placing it 0.3% ahead of the 780M. The AMD Radeon HD 7790 averages 17,666 points, 0.4% ahead, and the AMD Radeon Pro 460 averages 17,509 points, 0.5% behind. These margins are tight, with the 780M sitting within half a percentage point of all four rivals.

The RTX 4060 Ti AD104 lacks any head-to-head benchmark entries and has no nearest rivals listed. The database therefore cannot show a direct performance comparison through measured scores. What the data does show is a clear specification gap that would logically translate into significant performance differences, but without recorded measurements, the analysis must rely on architectural and specification differences.

Where Each One Wins

The AMD Radeon 780M demonstrates measurable wins in the available benchmark tests. Its Geekbench Vulkan score of 33,683 is notably strong for an integrated graphics processor, reflecting the RDNA 3.0 architecture's efficiency in compute-heavy workloads. The Geekbench OpenCL result of 18,602 further confirms its capability in general-purpose GPU compute tasks. The 3DMark Steel Nomad DX12 score of 480, while modest in absolute terms, represents a functional DirectX 12 Ultimate implementation.

The RTX 4060 Ti AD104 has no recorded benchmark wins in the database, but its specification sheet indicates where it would dominate. With 4,352 shading units compared to the 780M's 768, the NVIDIA card has 5.7 times the shader count. Its FP32 compute rate of 22.06 TFLOPS is 2.5 times the 780M's 8.909 TFLOPS. The texture rate of 344.8 GTexel/s versus 139.2 GTexel/s gives it a 2.5 to 1 advantage in texture throughput. The pixel rate of 121.7 GPixel/s versus 92.80 GPixel/s shows a 1.3 to 1 lead in pixel fill.

The RTX 4060 Ti AD104 also brings dedicated hardware that the 780M lacks. It has 136 tensor cores, while the 780M has no tensor core count listed. It has 34 ray tracing cores, compared to the 780M's 12 RT cores, a 2.8 to 1 advantage. These hardware resources target AI acceleration and real-time ray tracing workloads, areas where the AMD IGP cannot compete based on the recorded specifications.

Memory bandwidth heavily favors the discrete card. The RTX 4060 Ti AD104 uses 8 GB of GDDR6 memory on a 128-bit bus with 288.0 GB/s bandwidth. The 780M uses system shared memory with bandwidth listed as system dependent. In practice, dedicated VRAM bandwidth at 288.0 GB/s provides a massive throughput advantage for memory-intensive rendering tasks.

Architecture Differences

The AMD Radeon 780M uses the RDNA 3.0 architecture on the Phoenix chip, built on a 4 nm process at TSMC. The chip contains 25,390 million transistors on a 178 mm² die, yielding a transistor density of 142.6 million transistors per square millimeter. This high density reflects the modern 4 nm manufacturing node. The generation is listed as Navi III IGP (Phoenix), with a predecessor of Navi II IGP and a successor of Navi III IGP, indicating it belongs to AMD's integrated graphics line.

The NVIDIA GeForce RTX 4060 Ti AD104 uses the Ada Lovelace architecture on the AD104 chip, built on a 5 nm process at TSMC. The chip contains 35,800 million transistors on a 294 mm² die, with a transistor density of 121.8 million transistors per square millimeter. The density is lower than the AMD chip despite the higher transistor count because of the larger die area. The card belongs to the GeForce 40-series generation, with a predecessor of GeForce 30 and a successor of GeForce 50.

Both GPUs support DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4, so API compatibility is identical. Both use the PCIe 4.0 x8 bus interface. The architectural philosophies differ fundamentally: the 780M is designed as an integrated graphics processor sharing system resources, while the RTX 4060 Ti AD104 is a discrete dual-slot card with dedicated memory and power delivery.

The RDNA 3.0 architecture in the 780M emphasizes efficiency for mobile and compact systems, with a 15 W TDP. The Ada Lovelace architecture in the RTX 4060 Ti AD104 targets desktop performance with a 160 W TDP. The clock behavior reflects this: the 780M has an 800 MHz base clock and a 2900 MHz boost clock, while the RTX 4060 Ti AD104 has a 2310 MHz base clock and a 2535 MHz boost clock. The AMD chip's boost clock is higher, but the NVIDIA card sustains higher base clocks across more cores.

Ray tracing capabilities differ in scale. The 780M includes 12 RT cores, while the RTX 4060 Ti AD104 includes 34 RT cores. Tensor cores appear only on the NVIDIA side with 136 units, supporting DLSS and AI workloads. The AMD IGP has no tensor core equivalent listed in the data.

Specification Differences

The process node differs: the 780M uses 4 nm TSMC, while the RTX 4060 Ti AD104 uses 5 nm TSMC. Transistor counts diverge significantly, with the NVIDIA chip at 35,800 million versus 25,390 million for AMD, a 41% higher count. Die size is 294 mm² for NVIDIA versus 178 mm² for AMD, a 65% larger chip. Transistor density favors AMD at 142.6 million per mm² versus 121.8 million per mm².

Clock speeds show a mixed picture. The 780M has a base clock of 800 MHz and a boost clock of 2900 MHz. The RTX 4060 Ti AD104 has a base clock of 2310 MHz and a boost clock of 2535 MHz. The AMD part boosts higher, but the NVIDIA part runs nearly 3 times higher at base frequency.

Memory configurations are entirely different. The 780M uses system shared memory with shared type, shared bus width, and system dependent bandwidth. The RTX 4060 Ti AD104 uses 8 GB of GDDR6 memory on a 128-bit bus with 288.0 GB/s bandwidth and a memory clock of 2250 MHz or 18 Gbps effective.

Compute resources differ by large margins. The 780M has 768 shading units, 48 texture mapping units, and 32 raster operation pipelines. The RTX 4060 Ti AD104 has 4,352 shading units, 136 TMUs, and 48 ROPs. The NVIDIA card has 5.7 times the shaders and 2.8 times the TMUs, but only 1.5 times the ROPs.

The FP32 compute rate is 8.909 TFLOPS for the 780M and 22.06 TFLOPS for the RTX 4060 Ti AD104. Both list FP16 at a 1:1 ratio with FP32, meaning the FP16 rate equals the FP32 rate in each case. Pixel rate is 92.80 GPixel/s for AMD and 121.7 GPixel/s for NVIDIA. Texture rate is 139.2 GTexel/s for AMD and 344.8 GTexel/s for NVIDIA.

Power and physical specifications show the discrete card's requirements. The 780M has a 15 W TDP, an IGP slot width, and no power connectors. The RTX 4060 Ti AD104 has a 160 W TDP, a dual-slot width, and one 16-pin power connector, with a suggested PSU of 450 W. The NVIDIA card measures 240 mm in length, 111 mm in height, and 40 mm in width. The AMD IGP has no dimensions listed.

Display outputs differ: the 780M is motherboard dependent, while the RTX 4060 Ti AD104 provides 1x HDMI 2.1 and 3x DisplayPort 1.4a. The production status also differs: the 780M is active, while the RTX 4060 Ti AD104 is end-of-life.

FAQ

Q: Which GPU has a higher boost clock?

A: The AMD Radeon 780M has a boost clock of 2900 MHz, which is higher than the NVIDIA GeForce RTX 4060 Ti AD104's boost clock of 2535 MHz.

Q: How much more memory bandwidth does the RTX 4060 Ti AD104 provide?

A: The RTX 4060 Ti AD104 provides 288.0 GB/s of bandwidth from 8 GB of GDDR6 memory on a 128-bit bus. The Radeon 780M uses system shared memory with bandwidth listed as system dependent, so no fixed comparison value exists.

Q: What is the FP32 compute performance difference?

A: The RTX 4060 Ti AD104 delivers 22.06 TFLOPS of FP32 compute, which is 2.5 times the 8.909 TFLOPS of the Radeon 780M.

Q: Do both GPUs support the same graphics APIs?

A: Yes, both support DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4, according to the recorded data.

Q: What is the transistor count difference between the two chips?

A: The NVIDIA AD104 chip contains 35,800 million transistors, while the AMD Phoenix chip contains 25,390 million transistors, a difference of 10,410 million transistors.

Q: How does the Radeon 780M compare to its nearest rivals in average benchmark score?

A: The Radeon 780M averages 17,588 points. The NVIDIA GeForce RTX 4060 averages 17,639 points, 0.3% higher. The AMD Radeon HD 7790 averages 17,666 points, 0.4% higher. The AMD Radeon Pro 560 averages 17,551 points, 0.2% lower, and the AMD Radeon Pro 460 averages 17,509 points, 0.5% lower.

DETAILED SPECIFICATIONS

SPECIFICATION
780M
RTX 4060 Ti AD104
Core Specs
Shading Units
768
4,352 +466.7%
Shaders
768
4,352 +466.7%
TMUs
48
136 +183.3%
ROPs
32
48 +50.0%
Compute Units
12
—
SM Count
—
34
Clocks
Base Clock
800 MHz
2310 MHz
Boost Clock
2900 MHz
2535 MHz
Memory Clock
System Shared
2250 MHz 18 Gbps effective
Memory
Memory Size
System Shared
8 GB
VRAM (MB)
—
8,192
Memory Type
System Shared
GDDR6
Memory Bus
System Shared
128 bit
Bandwidth
System Dependent
288.0 GB/s
Cache
L1 Cache
128 KB per Array
128 KB (per SM)
L2 Cache
2 MB
32 MB
L0 Cache
32 KB per WGP
—
Performance
Pixel Rate
92.80 GPixel/s
121.7 GPixel/s
Texture Rate
139.2 GTexel/s
344.8 GTexel/s
FP32 (TFLOPS)
8.909 TFLOPS
22.06 TFLOPS
FP64 (TFLOPS)
556.8 GFLOPS (1:16)
344.8 GFLOPS (1:64)
FP16 (TFLOPS)
8.909 TFLOPS (1:1)
22.06 TFLOPS (1:1)
AI/RT
RT Cores
12
34 +183.3%
Tensor Cores
—
136
Power
TDP
15 W
160 W
TDP (W)
15
160 +966.7%
Suggested PSU
—
450 W
Power Connectors
None
1x 16-pin
Architecture
Architecture
RDNA 3.0
Ada Lovelace
GPU Name
Phoenix
AD104
Generation
Navi III IGP (Phoenix)
GeForce 40
Process Size
4 nm
5 nm
Transistors
25,390 million
35,800 million
Die Size
178 mm²
294 mm²
Foundry
TSMC
TSMC
Density
142.6M / mm²
121.8M / mm²
API Support
DirectX
12 Ultimate (12_2)
12 Ultimate (12_2)
OpenGL
4.6
4.6
Vulkan
1.4
1.4
OpenCL
2.1
3.0
CUDA
—
8.9
Shader Model
6.8
6.9
Physical
Slot Width
IGP
Dual-slot
Length
—
240 mm 9.4 inches
Height
—
111 mm 4.4 inches
Outputs
Motherboard Dependent
1x HDMI 2.13x DisplayPort 1.4a
Bus Interface
PCIe 4.0 x8
PCIe 4.0 x8
Other
Launch Price
—
399 USD
Production
Active
End-of-life
Predecessor
Navi II IGP
GeForce 30
Successor
Navi III IGP
GeForce 50
View Radeon 780M Details View GeForce RTX 4060 Ti AD104 Details