AMD Radeon 740M vs NVIDIA GeForce RTX 4060 Ti AD104 Comparison
AMD Radeon 740M
GeForce RTX 4060 Ti AD104
PERFORMANCE BENCHMARKS
Analysis: AMD Radeon 740M vs NVIDIA GeForce RTX 4060 Ti AD104
The Verdict
The data presents two fundamentally different products. The AMD Radeon 740M is an integrated graphics processor (IGP) built for mobility, while the NVIDIA GeForce RTX 4060 Ti AD104 is a discrete, dual-slot add-in card. Their benchmark profiles barely overlap, and the recorded data shows them serving opposite ends of the performance spectrum.
The Radeon 740M occupies the 53rd percentile among all GPUs in the database, with an average benchmark score of 12,870. Its nearest rivals in the database are the AMD FirePro W5100 (12,847, a 0.2% difference), the AMD Radeon Pro 455 (12,831, 0.3% ahead), and the NVIDIA GeForce GTX 590 (12,830, 0.3% ahead). It also trails the AMD Radeon RX 580 by a scant 0.4%. This positions the 740M as a capable integrated solution, roughly matching older discrete workstation and enthusiast cards from a previous generation.
The RTX 4060 Ti AD104, by contrast, has no recorded benchmark scores in the database and no average score. Its percentile rank of 50 is not accompanied by any measured performance data. The database contains no head-to-head benchmark results between these two units, and no wins are recorded for either side. The only concrete numbers available for the NVIDIA part are its specifications, its launch MSRP of 399 USD, and its production status of end-of-life.
Given this data, the Radeon 740M is the only unit with measurable performance. It is the choice for systems where integration matters, as it draws 45 W, uses system-shared memory, and requires no power connectors or dedicated slot. The RTX 4060 Ti AD104 is a discrete card with a 160 W TDP, a 450 W suggested PSU, and a single 16-pin power connector. Its specifications indicate far higher theoretical throughput, but the database records no benchmark verification of that. The verdict from the data alone: the 740M is the verified, measured performer; the RTX 4060 Ti AD104 is a specification-only entry with no recorded benchmark results.
Architecture Differences
The two GPUs come from different manufacturers and different architectural lineages. The Radeon 740M uses the Phoenix2 chip built on RDNA 3.0, fabricated on a 4 nm process at TSMC. The RTX 4060 Ti AD104 uses the AD104 chip on the Ada Lovelace architecture, fabricated on a 5 nm process, also at TSMC. The Radeon's transistor count is 20,900 million across a 137 mm² die, giving a transistor density of 152.6M per mm². The RTX 4060 Ti AD104 packs 35,800 million transistors on a 294 mm² die, with a density of 121.8M per mm². The AMD chip is denser despite having fewer total transistors and a smaller die.
The Radeon 740M belongs to the "Navi III IGP (Phoenix)" generation, with a predecessor of "Navi II IGP" and a successor of "Navi III IGP." Its production status is Active, and it was released on 2024-01-30. The RTX 4060 Ti AD104 belongs to the GeForce 40-series, with a predecessor of "GeForce 30" and a successor of "GeForce 50." Its production status is End-of-life, released on 2024-03-31.
Feature sets diverge significantly. The Radeon 740M has 256 shading units, 16 texture mapping units, 8 ROPs, and 4 ray tracing cores. It has no tensor cores listed. The RTX 4060 Ti AD104 has 4,352 shading units, 136 TMUs, 48 ROPs, 34 ray tracing cores, and 136 tensor cores. The NVIDIA part includes tensor cores, which the AMD part does not list at all. Both support DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4, so API coverage is identical.
Memory architecture is another major split. The Radeon 740M uses system-shared memory, with a system-dependent bandwidth. The RTX 4060 Ti AD104 has dedicated 8 GB of GDDR6 memory on a 128-bit bus, delivering 288.0 GB/s of bandwidth. The NVIDIA card's memory clock is listed as 2250 MHz, 18 Gbps effective. The AMD part has no dedicated memory clock; its memory is system shared.
FAQ
Q: Which GPU has a higher average benchmark score?
A: The AMD Radeon 740M has an average benchmark score of 12,870. The NVIDIA GeForce RTX 4060 Ti AD104 has an average benchmark score of 0, as no benchmarks are recorded for it in the database.
Q: What is the closest rival to the Radeon 740M?
A: The closest rival is the AMD FirePro W5100, with an average score of 12,847, a 0.2% difference from the 740M. The Radeon Pro 455 and GTX 590 are each 0.3% behind.
Q: Does the RTX 4060 Ti AD104 have tensor cores?
A: Yes, the RTX 4060 Ti AD104 lists 136 tensor cores. The Radeon 740M lists no tensor cores in its specifications.
Q: What is the TDP difference between the two?
A: The Radeon 740M has a TDP of 45 W. The RTX 4060 Ti AD104 has a TDP of 160 W.
Q: Which GPU has a larger memory bus?
A: The RTX 4060 Ti AD104 has a 128-bit memory bus with 8 GB of GDDR6. The Radeon 740M uses system-shared memory with no dedicated bus width.
Q: What is the production status of each?
A: The Radeon 740M is listed as Active. The RTX 4060 Ti AD104 is listed as End-of-life.
Specification Differences
The two parts differ across nearly every specification field. The Radeon 740M uses a 4 nm process; the RTX 4060 Ti AD104 uses 5 nm. Transistor counts are 20,900 million versus 35,800 million. Die size is 137 mm² versus 294 mm². Transistor density is 152.6M per mm² versus 121.8M per mm².
Clock speeds: the Radeon has a base clock of 800 MHz and a boost of 2800 MHz. The RTX 4060 Ti AD104 has a base of 2310 MHz and a boost of 2535 MHz. The AMD part has a higher boost clock, but the NVIDIA part starts from a much higher base.
Compute units: 256 shading units, 16 TMUs, and 8 ROPs for the Radeon. The RTX 4060 Ti AD104 has 4,352 shading units, 136 TMUs, and 48 ROPs. Ray tracing cores: 4 versus 34. Tensor cores: none listed versus 136.
Memory: system shared for the Radeon, versus 8 GB GDDR6 on a 128-bit bus with 288.0 GB/s for the NVIDIA. Pixel rate is 22.40 GPixel/s versus 121.7 GPixel/s. Texture rate is 44.80 GTexel/s versus 344.8 GTexel/s. FP32 is 2.867 TFLOPS versus 22.06 TFLOPS. FP16 is 2.867 TFLOPS (1:1) versus 22.06 TFLOPS (1:1).
Power and physical: the Radeon is 45 W, an IGP slot width, with no power connectors. The RTX 4060 Ti AD104 is 160 W, dual-slot, with one 16-pin connector and a 450 W suggested PSU. The NVIDIA card has dimensions of 240 mm length, 111 mm height, and 40 mm width. The AMD part has no listed dimensions. Display outputs: motherboard dependent for the Radeon, versus 1x HDMI 2.13x DisplayPort 1.4a for the NVIDIA (the data string is presented as written). Bus interface is PCIe 4.0 x8 for both.
Head-to-Head Benchmarks
The database contains no head-to-head benchmark entries between the AMD Radeon 740M and the NVIDIA GeForce RTX 4060 Ti AD104. The head-to-head array is empty, and both wins counters are 0. There are no recorded scores for the RTX 4060 Ti AD104 in any test. Its benchmark list is empty, and its average benchmark score is 0.
The only measured data available comes from the Radeon 740M. It records a Geekbench OpenCL score of 10,172 and a Geekbench Vulkan score of 15,568. These two results, combined, produce its average benchmark score of 12,870. The Vulkan score is roughly 53% higher than the OpenCL score for the same GPU, which indicates the Radeon's architecture responds well to the Vulkan API in the recorded tests.
There is no comparable data for the RTX 4060 Ti AD104. Without benchmark scores, no relative performance statement can be made from the database. The NVIDIA part's theoretical specifications are far higher: its FP32 of 22.06 TFLOPS is roughly 7.7 times the Radeon's 2.867 TFLOPS, and its texture rate of 344.8 GTexel/s is roughly 7.7 times the Radeon's 44.80 GTexel/s. But these are specification values, not benchmark results. The database does not verify them with any measured scores.
The closest rival context for the Radeon 740M comes from its nearest rivals list. The Radeon RX 580 is 0.4% ahead of the 740M, the FirePro W5100 is 0.2% behind, and both the Radeon Pro 455 and GTX 590 are 0.3% behind. This shows the 740M sits in a tight cluster of older discrete GPUs, all within a fraction of a percent of each other. The 740M's percentile rank of 53 among all GPUs reflects this mid-pack positioning.
Where Each One Wins
Based strictly on recorded data, the AMD Radeon 740M wins in every measurable category, simply because it is the only part with recorded benchmark scores. It has an average benchmark score of 12,870, a Geekbench OpenCL score of 10,172, and a Geekbench Vulkan score of 15,568. The RTX 4060 Ti AD104 has no recorded scores, so it cannot claim a benchmark win in the database.
The Radeon 740M also wins on integration. It is an IGP with a 45 W TDP, no power connectors, no slot width, and motherboard-dependent display outputs. It uses system-shared memory, which removes the need for dedicated VRAM. Its process node is smaller at 4 nm, and its transistor density is higher at 152.6M per mm². It has a higher boost clock at 2800 MHz versus 2535 MHz. It is listed as Active, while the RTX 4060 Ti AD104 is End-of-life.
The RTX 4060 Ti AD104 wins on specification-based measures. It has more shading units, TMUs, ROPs, ray tracing cores, and tensor cores. It has dedicated 8 GB GDDR6 memory with 288.0 GB/s bandwidth, versus system-shared memory with system-dependent bandwidth. Its FP32 and FP16 throughput are both 22.06 TFLOPS, and its pixel and texture rates are substantially higher. It has a defined physical footprint of 240 mm by 111 mm by 40 mm, a dual-slot cooler, and a 450 W suggested PSU. It also has a launch MSRP of 399 USD, which the Radeon lacks entirely.
In practical use-case terms, the data supports the Radeon 740M for systems where low power draw and integration are priorities, and where performance comparable to older discrete GPUs like the Radeon RX 580 or GTX 590 is sufficient. The RTX 4060 Ti AD104, with its far higher theoretical throughput and dedicated memory, is specified for workloads that demand more compute resources, but the database records no measured proof of that performance. The RTX 4060 Ti AD104's wins are entirely in the specification sheet; the Radeon 740M's wins are in the benchmark log.