AMD Radeon 540 vs NVIDIA RTX PRO 5000 72 GB Blackwell Comparison
AMD Radeon 540
RTX PRO 5000 72 GB Blackwell
PERFORMANCE BENCHMARKS
Analysis: AMD Radeon 540 vs NVIDIA RTX PRO 5000 72 GB Blackwell
Head-to-Head Benchmarks
The recorded data presents an unusual comparison, as the two cards share no common benchmark tests. The AMD Radeon 540 has results for Geekbench OpenCL and Vulkan, scoring 6184 and 9162 respectively. The NVIDIA RTX PRO 5000 72 GB Blackwell has results across 3DMark Steel Nomad DX12 and multiple Passmark tests, with its highest scores being 24310 in Passmark G3D and 15667 in Passmark GPU Compute. Direct cross-referencing is impossible, but the average benchmark score tells a broader story: the AMD Radeon 540 averages 7673, while the NVIDIA RTX PRO 5000 72 GB Blackwell averages 6407.
That average, however, is heavily skewed by the specific test selection. The RTX PRO 5000's Passmark DirectX 9 score of 311, DirectX 10 score of 175, DirectX 11 score of 219, and DirectX 12 score of 78 are legacy API tests that do not reflect modern workload performance. Its 3DMark Steel Nomad DX12 score of 9579.5 is a far more representative indicator of contemporary rendering capability. The AMD Radeon 540, by contrast, shows consistent scores across its two tests, with Vulkan (9162) notably higher than OpenCL (6184).
The percentile rankings are surprising. The AMD Radeon 540 sits at the 41st percentile of all GPUs, while the RTX PRO 5000 72 GB Blackwell sits at only the 37th percentile. This is a case where aggregate statistics obscure the fundamental performance gap. The RTX PRO 5000's nearest rivals according to the database include the NVIDIA GeForce GTX 460 SE (delta 0.3%) and NVIDIA GeForce GTX 580M (delta 0.3%), while the AMD Radeon 540's nearest rivals include the NVIDIA GeForce GTX 1660 Ti (delta -0.6%) and AMD Radeon Pro WX 3100 (delta 1.2%). These rival clusters suggest the average scores are not capturing the same workloads.
The most meaningful direct comparison available is in compute-oriented results. The RTX PRO 5000's Passmark GPU Compute score of 15667 dwarfs the Radeon 540's Geekbench OpenCL score of 6184, but these are different test suites measuring different aspects of compute performance. What the data does show clearly is the architectural chasm: the RTX PRO 5000 delivers 66.94 TFLOPS FP32, while the Radeon 540 delivers 908.5 GFLOPS. That is a raw compute ratio of roughly 73 to 1, and no benchmark aggregation can obscure that order of magnitude.
Architecture Differences
The two GPUs come from entirely different design generations. The AMD Radeon 540 uses the Lexa chip built on GCN 4.0 architecture, manufactured on a 14 nm process at GlobalFoundries. It belongs to the Polaris (RX 500) generation. The NVIDIA RTX PRO 5000 72 GB Blackwell uses the GB202 chip on Blackwell 2.0 architecture, manufactured on a 5 nm process at TSMC, from the Blackwell PRO W (x000) generation.
Transistor counts and die sizes illustrate the scale difference. The Radeon 540 packs 2,200 million transistors on a 103 mm² die, yielding a transistor density of 21.4 million per mm². The RTX PRO 5000 contains 92,200 million transistors on a 750 mm² die, with a density of 122.9 million per mm². The density advantage of the 5 nm process over 14 nm is stark, and the raw transistor budget is over 40 times larger.
Memory subsystems are equally divergent. The Radeon 540 has 1024 MB of GDDR5 on a 32 bit bus, with 24.00 GB/s bandwidth. The RTX PRO 5000 has 72 GB of GDDR7 on a 384 bit bus, with 1.34 TB/s bandwidth. The memory clock ratings differ as well: 1500 MHz (6 Gbps effective) for the Radeon 540 versus 1750 MHz (28 Gbps effective) for the RTX PRO 5000.
Compute unit counts scale accordingly. The Radeon 540 has 384 shading units, 24 texture mapping units, and 16 ROPs. The RTX PRO 5000 has 14080 shading units, 440 TMUs, and 160 ROPs. The RTX PRO 5000 also includes 110 ray tracing cores and 440 tensor cores, features entirely absent from the Radeon 540, which has no RT or tensor hardware. Pixel throughput is 18.93 GPixel/s for the Radeon 540 versus 380.3 GPixel/s for the RTX PRO 5000, and texture throughput is 28.39 GTexel/s versus 1,045.9 GTexel/s.
The feature set differences extend to connectivity and power. The Radeon 540 uses PCIe 3.0 x8, while the RTX PRO 5000 uses PCIe 5.0 x16. Display outputs are 2x DisplayPort 1.4a versus 4x DisplayPort 2.1b. The Radeon 540 is a single-slot card with no power connectors and a 50 W TDP, while the RTX PRO 5000 is dual-slot, requires a single 16-pin connector, and has a 300 W TDP. The suggested power supply is 250 W versus 700 W. API support also differs: DirectX 12 (12_0) versus DirectX 12 Ultimate (12_2), and Vulkan 1.3 versus 1.4, with OpenGL 4.6 on both.
FAQ
Q: Which GPU has the higher average benchmark score?
A: The AMD Radeon 540 has an average benchmark score of 7673, while the NVIDIA RTX PRO 5000 72 GB Blackwell has an average of 6407. However, the test sets are entirely disjoint, so this comparison is not apples-to-apples.
Q: Does the RTX PRO 5000 support ray tracing?
A: Yes. The RTX PRO 5000 72 GB Blackwell includes 110 ray tracing cores and 440 tensor cores. The AMD Radeon 540 has no ray tracing cores or tensor cores at all.
Q: What is the memory capacity difference?
A: The RTX PRO 5000 has 72 GB of GDDR7 memory on a 384 bit bus with 1.34 TB/s bandwidth. The AMD Radeon 540 has 1024 MB of GDDR5 memory on a 32 bit bus with 24.00 GB/s bandwidth.
Q: How do the FP32 compute figures compare?
A: The RTX PRO 5000 delivers 66.94 TFLOPS FP32, while the Radeon 540 delivers 908.5 GFLOPS FP32. Both cards have 1:1 FP16 to FP32 ratios, so their FP16 figures match their FP32 figures.
Q: Which GPU is still in production?
A: The NVIDIA RTX PRO 5000 72 GB Blackwell has an active production status and was released on 2025-10-20. The AMD Radeon 540 is end-of-life and was released on 2017-04-19.
Q: What are the power requirements?
A: The Radeon 540 has a 50 W TDP with no power connectors and a suggested 250 W PSU. The RTX PRO 5000 has a 300 W TDP with a 16-pin connector and a suggested 700 W PSU.
Specification Differences
The two cards differ in nearly every recorded specification field. The process node is 14 nm for the Radeon 540 versus 5 nm for the RTX PRO 5000. Transistors are 2,200 million versus 92,200 million, and die size is 103 mm² versus 750 mm². Transistor density is 21.4M per mm² versus 122.9M per mm².
The Radeon 540 has no base or boost clock listed, while the RTX PRO 5000 has a base clock of 1740 MHz and a boost clock of 2377 MHz. Memory clock is 1500 MHz (6 Gbps effective) versus 1750 MHz (28 Gbps effective). Memory size is 1024 MB versus 72 GB, type is GDDR5 versus GDDR7, bus width is 32 bit versus 384 bit, and bandwidth is 24.00 GB/s versus 1.34 TB/s.
Shading units are 384 versus 14080. TMUs are 24 versus 440. ROPs are 16 versus 160. The RTX PRO 5000 has 110 RT cores and 440 tensor cores; the Radeon 540 has none. Pixel rate is 18.93 GPixel/s versus 380.3 GPixel/s. Texture rate is 28.39 GTexel/s versus 1,045.9 GTexel/s. FP32 is 908.5 GFLOPS versus 66.94 TFLOPS. FP16 matches each card's FP32 at a 1:1 ratio.
TDP is 50 W versus 300 W. Slot width is single-slot versus dual-slot. Power connectors are none versus 1x 16-pin. Suggested PSU is 250 W versus 700 W. Bus interface is PCIe 3.0 x8 versus PCIe 5.0 x16. Display outputs are 2x DisplayPort 1.4a versus 4x DisplayPort 2.1b. DirectX support is 12 (12_0) versus 12 Ultimate (12_2). Vulkan is 1.3 versus 1.4. OpenGL is 4.6 on both.
The RTX PRO 5000 has physical dimensions of 267 mm length, 111 mm height, and 40 mm width; the Radeon 540 has no recorded dimensions. Production status is end-of-life versus active. Release dates are 2017-04-19 versus 2025-10-20. The Radeon 540's predecessor is Arctic Islands and successor is Vega; the RTX PRO 5000's predecessor is Workstation Ada and it has no successor listed.
Where Each One Wins
The AMD Radeon 540 wins in scenarios where low power draw and minimal system requirements matter. Its 50 W TDP requires no power connectors and only a 250 W suggested PSU, making it suitable for compact or legacy systems. Its single-slot form factor and PCIe 3.0 x8 interface allow installation in older motherboards. For basic display output or light compute tasks, the Radeon 540's Vulkan score of 9162 indicates reasonable API efficiency relative to its hardware class. Its 41st percentile ranking versus all GPUs is higher than the RTX PRO 5000's 37th percentile, though this is a function of the disjoint benchmark sets.
The RTX PRO 5000 72 GB Blackwell wins in every performance-intensive category. Its 66.94 TFLOPS FP32 compute, 1.34 TB/s memory bandwidth, and 72 GB memory capacity make it suited for large-scale compute, AI inference, and rendering workloads. The 110 RT cores and 440 tensor cores enable hardware-accelerated ray tracing and tensor operations that the Radeon 540 cannot perform at all. Its 3DMark Steel Nomad DX12 score of 9579.5 demonstrates strong modern DirectX 12 performance, and its Passmark G3D score of 24310 is the highest recorded result for either card in any test. The 4x DisplayPort 2.1b outputs support higher display counts and newer display standards.
The Radeon 540's 24.00 GB/s bandwidth and 1024 MB memory limit it to basic tasks, while the RTX PRO 5000's 1.34 TB/s bandwidth and 72 GB capacity target professional visualization and data-intensive workloads. The Radeon 540 belongs to the Polaris generation with a 14 nm process and GCN 4.0 architecture; the RTX PRO 5000 belongs to the Blackwell generation with a 5 nm process and Blackwell 2.0 architecture. The data supports a clear conclusion: the Radeon 540 is an entry-level legacy card, while the RTX PRO 5000 is a high-end professional workstation GPU. Each wins in the contexts its design targets, but the performance gulf is enormous.