AMD Instinct MI350P vs NVIDIA GeForce RTX 5060 Ti 8 GB Comparison
AMD Instinct MI350P
GeForce RTX 5060 Ti 8 GB
PERFORMANCE BENCHMARKS
Analysis: AMD Instinct MI350P vs NVIDIA GeForce RTX 5060 Ti 8 GB
Head-to-Head Benchmarks
The recorded data contains no direct head-to-head benchmark results between the AMD Instinct MI350P and the NVIDIA GeForce RTX 5060 Ti 8 GB. The MI350P has no benchmark entries in the database, while the RTX 5060 Ti has eight recorded tests. This makes a direct score-by-score comparison impossible. Instead, the analysis must rely on the architectural specifications and the RTX 5060 Ti’s standalone benchmark performance.
The RTX 5060 Ti delivers 23.70 TFLOPS FP32 and 23.70 TFLOPS FP16, with a texture rate of 370.4 GTexel/s and a pixel rate of 123.5 GPixel/s. Its 3DMark Steel Nomad DX12 score is 4019, and its PassMark G3D score is 21981. The GPU compute score on PassMark is 11365. These numbers place it at the 29th percentile among all GPUs, with an average benchmark score of 4901. Its nearest rivals, according to the database, are the AMD FirePro W5130M at 4904 (0.1% behind), the NVIDIA GeForce GTS 450 at 4893 (0.2% ahead), the AMD Radeon R7 M265 at 4929 (0.6% behind), and the AMD Radeon R7 M360 at 4931 (0.6% behind). The delta percentages are all within 1%, which indicates the RTX 5060 Ti’s average score sits in a narrow band near those older or lower-tier parts.
The MI350P, by contrast, has no recorded benchmarks and a percentile rank of 50, which is the midpoint of the database distribution. Its average benchmark score is listed as 0, meaning no performance data has been captured for it. The MI350P’s theoretical FP32 output is 36.04 TFLOPS, which is 52% higher than the RTX 5060 Ti’s 23.70 TFLOPS. The texture rate of 1,126.4 GTexel/s is more than triple the RTX 5060 Ti’s 370.4 GTexel/s. However, the MI350P has a pixel rate of 0 MPixel/s and no ROPs, which means it cannot rasterize frames in the traditional sense. The RTX 5060 Ti has 48 ROPs and a functional pixel pipeline.
The RTX 5060 Ti’s PassMark DirectX scores show a pattern: DirectX 9 at 228, DirectX 10 at 142, DirectX 11 at 220, and DirectX 12 at 82. The DirectX 12 score is notably lower than the older API scores, which suggests the card’s driver or architecture favors legacy workloads in those specific tests. The PassMark G2D score of 1169 is far below the G3D score of 21981, which confirms the card is compute-oriented rather than 2D-focused.
Because the MI350P has no benchmarks, the head-to-head section must rely on specification-level comparisons. The MI350P’s FP32 and FP16 figures are identical at 36.04 TFLOPS, indicating a 1:1 ratio. The RTX 5060 Ti also has a 1:1 ratio at 23.70 TFLOPS. Both use a 1:1 FP16/FP32 design, but the MI350P has a 52% advantage in raw floating-point throughput. The memory bandwidth gap is even larger: the MI350P provides 8.19 TB/s, while the RTX 5060 Ti provides 448.0 GB/s. That is an 18.3x difference in favor of the MI350P.
The RTX 5060 Ti’s only clear wins are in pixel rate, API support, and display outputs. It has a functioning pixel pipeline with 123.5 GPixel/s, while the MI350P has none. The RTX 5060 Ti supports DirectX 12 Ultimate, OpenGL 4.6, and Vulkan 1.4, whereas the MI350P lists N/A for all three. The RTX 5060 Ti also has 1x HDMI 2.1b and 3x DisplayPort 2.1b outputs, while the MI350P has no display outputs at all.
The Verdict
The data indicates these two products serve completely different purposes. The MI350P is an accelerator with no display outputs, no rasterization hardware, and no consumer API support. The RTX 5060 Ti is a conventional graphics card with full display connectivity, DirectX 12 Ultimate support, and a working pixel pipeline. Benchmark results exist only for the RTX 5060 Ti, so any comparison of actual measured performance is one-sided.
For users who need a GPU for gaming, rendering to a screen, or running DirectX/Vulkan applications, the RTX 5060 Ti is the only viable option from this pair. Its 23.70 TFLOPS FP32 and 448.0 GB/s bandwidth are sufficient for consumer workloads, and its 3DMark score of 4019 confirms it can handle modern DX12 titles. The MI350P cannot display anything and has no API support, making it unsuitable for any interactive or visual task.
For compute-heavy workloads that do not require display output, the MI350P offers substantially higher raw throughput. Its 36.04 TFLOPS FP32, 8.19 TB/s memory bandwidth, and 144 GB HBM3e capacity dwarf the RTX 5060 Ti’s 8 GB GDDR7. The MI350P’s 73,000 million transistors on a 1190 mm² die indicate a server-class part designed for data centers or scientific computing. The RTX 5060 Ti’s 21,900 million transistors on a 181 mm² die are optimized for power efficiency and consumer pricing.
The RTX 5060 Ti’s nearest rivals are all within 0.6% of its average score, which suggests its benchmark position is not dominant. It sits at the 29th percentile, meaning 71% of GPUs in the database outperform it on average. The MI350P’s 50th percentile rank is a placeholder, not a measured result, since its average score is 0.
Where Each One Wins
The MI350P wins in every compute-related specification that does not involve rasterization. Its FP32 throughput of 36.04 TFLOPS is 52% higher. Its memory bandwidth of 8.19 TB/s is over 18 times higher. Its memory capacity of 144 GB is 18 times larger. Its texture rate of 1,126.4 GTexel/s is three times higher. Its bus width of 8192 bit is 64 times wider than the RTX 5060 Ti’s 128 bit. The MI350P also uses HBM3e memory, while the RTX 5060 Ti uses GDDR7, which gives the MI350P a massive bandwidth advantage for large data sets.
The RTX 5060 Ti wins in every consumer-facing category. It has 48 ROPs and a pixel rate of 123.5 GPixel/s, while the MI350P has 0 ROPs and 0 MPixel/s. It supports DirectX 12 Ultimate, OpenGL 4.6, and Vulkan 1.4, while the MI350P supports none of these. It has four display outputs, while the MI350P has none. Its power draw of 180 W is far lower than the MI350P’s 600 W, and its suggested PSU of 450 W is less than half of the MI350P’s 1000 W. The RTX 5060 Ti also uses a single 8-pin connector, while the MI350P requires a 16-pin connector.
The RTX 5060 Ti’s boost clock of 2572 MHz is higher than the MI350P’s 2200 MHz, but the MI350P compensates with 8192 shading units versus 4608. The RTX 5060 Ti has 36 RT cores and 144 tensor cores, while the MI350P lists none for either. This means ray tracing and tensor operations are only available on the RTX 5060 Ti. The MI350P’s CDNA 4.0 architecture is designed for compute, not graphics, so it omits these features entirely.
FAQ
Q: Which GPU has higher FP32 performance?
A: The AMD Instinct MI350P has 36.04 TFLOPS FP32, which is 52% higher than the NVIDIA GeForce RTX 5060 Ti’s 23.70 TFLOPS.
Q: Can the MI350P output video to a display?
A: No. The MI350P has no display outputs and a pixel rate of 0 MPixel/s with 0 ROPs. The RTX 5060 Ti has 1x HDMI 2.1b and 3x DisplayPort 2.1b outputs.
Q: What is the memory capacity difference?
A: The MI350P has 144 GB of HBM3e, while the RTX 5060 Ti has 8 GB of GDDR7. The MI350P’s capacity is 18 times larger.
Q: Does the RTX 5060 Ti support DirectX 12?
A: Yes. The RTX 5060 Ti supports DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4. The MI350P lists N/A for all APIs.
Q: What is the RTX 5060 Ti’s average benchmark score?
A: The RTX 5060 Ti has an average benchmark score of 4901, with a 3DMark Steel Nomad score of 4019 and a PassMark G3D score of 21981.
Q: How does the RTX 5060 Ti compare to its nearest rivals?
A: The RTX 5060 Ti’s average score of 4901 is within 0.6% of the AMD FirePro W5130M (4904), NVIDIA GeForce GTS 450 (4893), AMD Radeon R7 M265 (4929), and AMD Radeon R7 M360 (4931).
Architecture Differences
The MI350P uses the CDNA 4.0 architecture on a 3 nm TSMC process, with 73,000 million transistors on a 1190 mm² die. The transistor density is 61.3 million per mm². The RTX 5060 Ti uses the Blackwell 2.0 architecture on a 5 nm TSMC process, with 21,900 million transistors on a 181 mm² die. The transistor density is 121.0 million per mm², which is nearly double the MI350P’s density despite the older process node. This indicates the RTX 5060 Ti’s design is much more compact per transistor.
The MI350P’s chip is the MI350 128CU with 8192 shading units, 512 TMUs, and 0 ROPs. It has no RT cores and no tensor cores. The RTX 5060 Ti’s chip is the GB206 with 4608 shading units, 144 TMUs, 48 ROPs, 36 RT cores, and 144 tensor cores. The MI350P has no display outputs, no API support for DirectX, OpenGL, or Vulkan, and its pixel rate is 0 MPixel/s. The RTX 5060 Ti has full display outputs and supports all three major graphics APIs.
The MI350P uses HBM3e memory with a 8192-bit bus and 8.19 TB/s bandwidth. The RTX 5060 Ti uses GDDR7 with a 128-bit bus and 448.0 GB/s bandwidth. The MI350P’s memory clock is 2000 MHz (8 Gbps effective), while the RTX 5060 Ti’s is 1750 MHz (28 Gbps effective). The effective data rate is much higher on the RTX 5060 Ti, but the bus width difference makes the MI350P’s total bandwidth overwhelming.
The MI350P has no series designation, while the RTX 5060 Ti belongs to the GeForce 50-series. The MI350P’s generation is listed as Instinct (MIx), and its predecessor is Radeon Instinct. The RTX 5060 Ti’s generation is GeForce 50, with predecessor GeForce 40 and successor GeForce 60. The RTX 5060 Ti’s production status is Active, while the MI350P’s is not specified.
Specification Differences
The MI350P is a 3 nm part; the RTX 5060 Ti is a 5 nm part. The MI350P has 73,000 million transistors; the RTX 5060 Ti has 21,900 million. The die sizes are 1190 mm² versus 181 mm². Transistor density is 61.3M per mm² versus 121.0M per mm². Base clocks are 1000 MHz versus 2407 MHz. Boost clocks are 2200 MHz versus 2572 MHz. Memory size is 144 GB versus 8 GB. Memory type is HBM3e versus GDDR7. Bus width is 8192 bit versus 128 bit. Bandwidth is 8.19 TB/s versus 448.0 GB/s.
Shading units are 8192 versus 4608. TMUs are 512 versus 144. ROPs are 0 versus 48. RT cores are absent versus 36. Tensor cores are absent versus 144. Pixel rate is 0 MPixel/s versus 123.5 GPixel/s. Texture rate is 1,126.4 GTexel/s versus 370.4 GTexel/s. FP32 is 36.04 TFLOPS versus 23.70 TFLOPS. FP16 is identical to FP32 for both at 36.04 and 23.70 TFLOPS, respectively. TDP is 600 W versus 180 W. Power connectors are 1x 16-pin versus 1x 8-pin. Suggested PSU is 1000 W versus 450 W.
The bus interface is PCIe 5.0 x16 for the MI350P versus PCIe 5.0 x8 for the RTX 5060 Ti. Display outputs are none versus 1x HDMI 2.1b and 3x DisplayPort 2.1b. The MI350P has no DirectX, OpenGL, or Vulkan support; the RTX 5060 Ti has DirectX 12 Ultimate, OpenGL 4.6, and Vulkan 1.4. Dimensions are identical in height and width (111 mm and 40 mm), but the MI350P is longer at 267 mm versus 241 mm. Release dates are 2026-05-06 for the MI350P and 2025-04-15 for the RTX 5060 Ti. The RTX 5060 Ti has a launch MSRP of 379 USD; the MI350P has no listed MSRP.