AMD Instinct MI350P vs NVIDIA GeForce RTX 4070 Ti SUPER AD102 Comparison
AMD Instinct MI350P
GeForce RTX 4070 Ti SUPER AD102
PERFORMANCE BENCHMARKS
Analysis: AMD Instinct MI350P vs NVIDIA GeForce RTX 4070 Ti SUPER AD102
Where Each One Wins
The AMD Instinct MI350P and NVIDIA GeForce RTX 4070 Ti SUPER AD102 occupy entirely different positions in the database, with no overlapping benchmark results. The MI350P has no recorded benchmarks and a percentile rank of 50 among all GPUs, while the RTX 4070 Ti SUPER AD102 has one recorded test, the 3DMark Steel Nomad DX12 benchmark, where it scores 6269.5 points and sits at the 36th percentile. The AMD card is a compute-oriented accelerator with no display outputs and no graphics API support, meaning it cannot run the same DirectX-based workloads as the NVIDIA card. The RTX 4070 Ti SUPER AD102, by contrast, is a consumer graphics card with full DirectX 12 Ultimate, OpenGL 4.6, and Vulkan 1.4 support, making it the only one of the two that can render graphics workloads in the database.
The MI350P wins in memory capacity, memory bandwidth, process node, and raw texture throughput. It carries 144 GB of HBM3e memory across an 8192-bit bus, delivering 8.19 TB/s of bandwidth, figures that dwarf the RTX 4070 Ti SUPER AD102's 16 GB GDDR6X on a 256-bit bus with 672.3 GB/s. The AMD part also has a texture rate of 1,126.4 GTexel/s, nearly double the NVIDIA card's 689.0 GTexel/s, and it is built on a 3 nm TSMC process versus the 5 nm process used for the AD102 chip. The RTX 4070 Ti SUPER AD102 wins in pixel throughput, FP32 compute, shading units, ray tracing hardware, tensor cores, and API support. It delivers 250.6 GPixel/s versus 0 MPixel/s for the MI350P, 44.10 TFLOPS FP32 versus 36.04 TFLOPS, and includes 66 ray tracing cores and 264 tensor cores, neither of which the AMD accelerator lists.
FAQ
Q: Which card has more memory bandwidth?
A: The AMD Instinct MI350P has 8.19 TB/s of bandwidth from 144 GB of HBM3e memory on an 8192-bit bus. The NVIDIA GeForce RTX 4070 Ti SUPER AD102 has 672.3 GB/s from 16 GB of GDDR6X on a 256-bit bus.
Q: Can the AMD Instinct MI350P run DirectX games?
A: No. The database lists DirectX, OpenGL, and Vulkan support as N/A for the MI350P, and it has no display outputs. The RTX 4070 Ti SUPER AD102 supports DirectX 12 Ultimate, OpenGL 4.6, and Vulkan 1.4, with 1x HDMI 2.1 and 3x DisplayPort 1.4a outputs.
Q: Which card has higher FP32 compute?
A: The NVIDIA GeForce RTX 4070 Ti SUPER AD102 has 44.10 TFLOPS FP32, while the AMD Instinct MI350P has 36.04 TFLOPS FP32. Both run FP16 at a 1:1 ratio with their FP32 figures.
Q: What is the process node difference?
A: The AMD Instinct MI350P is fabricated on a 3 nm process at TSMC, while the NVIDIA GeForce RTX 4070 Ti SUPER AD102 uses a 5 nm process at the same foundry. The AMD die is 1190 mm² with 73,000 million transistors, and the NVIDIA die is 609 mm² with 76,300 million transistors.
Q: How does the NVIDIA card compare to its nearest rivals in the database?
A: The RTX 4070 Ti SUPER AD102 scores 6269.5 in 3DMark Steel Nomad DX12. Its closest rival, the NVIDIA GeForce RTX 5070 Ti SUPER, scores 6270 with a 0% delta. The AMD FirePro W600 scores 6223 with a 0.8% delta, the NVIDIA Quadro K620 scores 6282 with a -0.2% delta, and the AMD Radeon R7 M350 scores 6327 with a -0.9% delta.
Q: Which card has a higher power requirement?
A: The AMD Instinct MI350P has a 600 W TDP and a suggested PSU of 1000 W. The NVIDIA GeForce RTX 4070 Ti SUPER AD102 has a 285 W TDP and a suggested PSU of 600 W.
Head-to-Head Benchmarks
The database contains no head-to-head benchmark results between these two cards, and the AMD Instinct MI350P has no individual benchmark scores at all. The only comparable data point comes from the NVIDIA side: the RTX 4070 Ti SUPER AD102 records a 6269.5 score in the 3DMark Steel Nomad DX12 test, which places it at the 36th percentile among all GPUs. Its average benchmark score is 6270, and its nearest rival, the RTX 5070 Ti SUPER, matches that average exactly with a 0% delta. The AMD card sits at the 50th percentile but with an average benchmark score of zero, indicating no tested workloads in the database.
The largest numerical gaps between the two cards appear in memory and rendering specifications rather than benchmark scores. The MI350P's 8.19 TB/s memory bandwidth is roughly 12 times the RTX 4070 Ti SUPER AD102's 672.3 GB/s. Its 144 GB memory capacity is nine times larger. The texture rate favors AMD at 1,126.4 GTexel/s versus 689.0 GTexel/s, a 63% advantage. Conversely, the NVIDIA card leads in pixel rate by the maximum possible margin, 250.6 GPixel/s versus 0 MPixel/s, because the AMD accelerator has no ROP output. FP32 compute favors NVIDIA at 44.10 TFLOPS versus 36.04 TFLOPS, a 22% lead. Shading units also favor NVIDIA at 8448 versus 8192, though the AMD card has 512 texture mapping units versus 264 for NVIDIA. The RTX 4070 Ti SUPER AD102 further holds 66 ray tracing cores and 264 tensor cores, while the MI350P lists neither field.
The nearest rival data for the NVIDIA card shows how tightly clustered its performance class is. The RTX 5070 Ti SUPER matches the average score of 6270 exactly with a 0% delta. The AMD FirePro W600 trails by 0.8%, the NVIDIA Quadro K620 leads by 0.2%, and the AMD Radeon R7 M350 leads by 0.9%. These deltas, all within roughly one percent, indicate that the RTX 4070 Ti SUPER AD102 sits in a narrow performance band where small score differences determine ranking. The AMD Instinct MI350P has no nearest rivals listed, which reflects its absence of recorded benchmark data rather than an isolated performance position.
Specification Differences
The two cards differ across nearly every recorded specification. The AMD Instinct MI350P uses a chip labeled "MI350 128CU" under the CDNA 4.0 architecture and the Instinct (MIx) generation, while the NVIDIA card uses the AD102 chip under Ada Lovelace and the GeForce 40 generation. Process nodes differ: 3 nm for AMD, 5 nm for NVIDIA, both from TSMC. Transistor counts are 73,000 million for AMD and 76,300 million for NVIDIA, with die sizes of 1190 mm² and 609 mm² respectively. Transistor density is 61.3M per mm² for AMD and 125.3M per mm² for NVIDIA.
Clock speeds diverge sharply. The MI350P runs at a 1000 MHz base and 2200 MHz boost, while the RTX 4070 Ti SUPER AD102 runs at 2340 MHz base and 2610 MHz boost. Memory clocks are 2000 MHz with 8 Gbps effective for AMD and 1313 MHz with 21 Gbps effective for NVIDIA. Memory configurations are 144 GB HBM3e on an 8192-bit bus for AMD versus 16 GB GDDR6X on a 256-bit bus for NVIDIA. Bandwidth is 8.19 TB/s versus 672.3 GB/s.
Compute resources differ in distribution. AMD has 8192 shading units, 512 TMUs, and 0 ROPs. NVIDIA has 8448 shading units, 264 TMUs, and 96 ROPs. The MI350P lists no ray tracing cores or tensor cores, while the RTX 4070 Ti SUPER AD102 has 66 RT cores and 264 tensor cores. Pixel rate is 0 MPixel/s for AMD and 250.6 GPixel/s for NVIDIA. Texture rate is 1,126.4 GTexel/s for AMD and 689.0 GTexel/s for NVIDIA. FP32 is 36.04 TFLOPS for AMD and 44.10 TFLOPS for NVIDIA, with both at 1:1 FP16.
Power and physical specifications also differ. TDP is 600 W for AMD and 285 W for NVIDIA. Suggested PSU is 1000 W versus 600 W. The AMD card is dual-slot, 267 mm long, 111 mm high, and 40 mm wide. The NVIDIA card is triple-slot, 310 mm long, 140 mm high, and 61 mm wide. Both use a single 16-pin power connector. Bus interfaces are PCIe 5.0 x16 for AMD and PCIe 4.0 x16 for NVIDIA. Display outputs are absent on the AMD card, while the NVIDIA card has 1x HDMI 2.1 and 3x DisplayPort 1.4a. The AMD card lists no graphics APIs, and the NVIDIA card supports DirectX 12 Ultimate, OpenGL 4.6, and Vulkan 1.4. Release dates are May 6, 2026 for AMD and June 9, 2024 for NVIDIA. The NVIDIA card is marked end-of-life with a successor in the GeForce 50 series, while the AMD card has no production status listed. The RTX 4070 Ti SUPER AD102 has a launch MSRP of 799 USD.
Architecture Differences
The AMD Instinct MI350P uses CDNA 4.0, an architecture aimed at compute acceleration with no graphics pipeline. This is reflected in the absence of display outputs, the lack of DirectX, OpenGL, and Vulkan support, and the zero ROP count. The memory subsystem uses HBM3e across a massive 8192-bit bus, a configuration designed for bandwidth-intensive workloads rather than rasterization. The 3 nm process at TSMC allows a 1190 mm² die with 73,000 million transistors, though the density of 61.3M transistors per mm² is lower than the NVIDIA part, indicating a layout with fewer features packed into each square millimeter.
The NVIDIA GeForce RTX 4070 Ti SUPER AD102 uses Ada Lovelace, a consumer graphics architecture that includes dedicated ray tracing cores and tensor cores. The 66 RT cores and 264 tensor cores enable hardware-accelerated ray tracing and AI workloads, neither of which the MI350P lists. The 5 nm process at TSMC yields a 609 mm² die with 76,300 million transistors, giving a density of 125.3M per mm², more than double the AMD figure. The GDDR6X memory on a 256-bit bus is a narrower, lower-bandwidth configuration, but the higher boost clock of 2610 MHz and the presence of 96 ROPs allow the card to generate 250.6 GPixel/s, a capability the MI350P entirely lacks.
The MI350P's texture rate of 1,126.4 GTexel/s comes from 512 TMUs operating at the 2200 MHz boost clock. The RTX 4070 Ti SUPER AD102's 264 TMUs at 2610 MHz produce 689.0 GTexel/s. The AMD card's shading unit count of 8192 is slightly below NVIDIA's 8448, but the lower boost clock of 2200 MHz versus 2610 MHz contributes to the FP32 deficit, 36.04 TFLOPS versus 44.10 TFLOPS. The transistor count difference is small, 76,300 million for NVIDIA versus 73,000 million for AMD, but the die area difference is large, 609 mm² versus 1190 mm², which explains the density gap.
The API support difference stems from the architectural focus. The MI350P lists N/A for DirectX, OpenGL, and Vulkan, meaning it is not designed for interactive graphics. The RTX 4070 Ti SUPER AD102 supports DirectX 12 Ultimate with the 12_2 feature level, OpenGL 4.6, and Vulkan 1.4, making it compatible with the 3DMark Steel Nomad DX12 benchmark that produced its recorded score. The AMD card's lack of API support aligns with its lack of benchmark data; the database shows no test that it can run.
The Verdict
The data separates these two cards into distinct roles with little overlap. The AMD Instinct MI350P is a compute accelerator with massive memory capacity, 144 GB of HBM3e, and extreme bandwidth, 8.19 TB/s, paired with a 600 W TDP and no display outputs. Its 50th percentile rank among all GPUs with zero recorded benchmarks reflects the absence of graphics-oriented tests in the database, not a measured performance level. The NVIDIA GeForce RTX 4070 Ti SUPER AD102 is a consumer graphics card with a recorded 3DMark Steel Nomad DX12 score of 6269.5, a 36th percentile rank, and full graphics API support including DirectX 12 Ultimate, OpenGL 4.6, and Vulkan 1.4.
For workloads that rely on memory bandwidth and texture throughput, the MI350P holds the advantage. Its 8192-bit memory bus and 8.19 TB/s bandwidth are unmatched in this comparison, and its 1,126.4 GTexel/s texture rate exceeds the NVIDIA card by 437.4 GTexel/s. For workloads that rely on pixel output, ray tracing, tensor operations, or graphics rendering, the RTX 4070 Ti SUPER AD102 is the only viable option, as the MI350P has 0 MPixel/s pixel rate, no RT cores, no tensor cores, and no graphics APIs. The NVIDIA card also leads in FP32 compute at 44.10 TFLOPS versus 36.04 TFLOPS and runs at higher clock speeds, with a 2610 MHz boost versus 2200 MHz.
The RTX 4070 Ti SUPER AD102's benchmark position is tightly contested. Its nearest rival, the RTX 5070 Ti SUPER, matches its average score of 6270 exactly, and the other listed rivals, the Quadro K620, FirePro W600, and Radeon R7 M350, sit within 0.9% either direction. This clustering indicates that the NVIDIA card delivers performance consistent with its class. The MI350P has no comparable benchmark data, so any performance assessment must rely on its specification sheet alone.
The choice between these cards depends entirely on the workload. The MI350P suits applications requiring enormous memory pools and bandwidth, with its 144 GB capacity and 8.19 TB/s throughput, and its 3 nm process and 73,000 million transistors suggest a modern, power-hungry compute part. The RTX 4070 Ti SUPER AD102 suits rendering and graphics workloads, with its 250.6 GPixel/s pixel rate, 66 RT cores, 264 tensor cores, and full API support, all within a 285 W TDP. The database shows no scenario where both cards compete on the same benchmark, which reinforces their separation: one is a graphics product with measured results, the other is a compute product without graphics capability.