AMD Instinct MI325X vs NVIDIA GeForce RTX 3050 6 GB Comparison

AMD
RADEON

AMD Instinct MI325X

CORE STATE Aqua Vanjaram
VRAM 256 GB
CLOCK SPEED 2100 MHz
TDP 1000 W
BUS WIDTH 8192 bit
ARCHITECTURE CDNA 3.0
nm
PROCESS 5 nm
LAUNCH DATE 2024
VS
NVIDIA
GEFORCE

GeForce RTX 3050 6 GB

CORE STATE GA107
VRAM 6 GB
CLOCK SPEED 1470 MHz
TDP 70 W
BUS WIDTH 96 bit
ARCHITECTURE Ampere
nm
PROCESS 8 nm
LAUNCH DATE 2024

PERFORMANCE BENCHMARKS

3dmark_3dmark_steel_nomad_dx12
N/A
1,515
passmark_directx_10
N/A
59
passmark_directx_11
N/A
72
passmark_directx_12
N/A
53
passmark_directx_9
N/A
124
passmark_g2d
N/A
882
passmark_g3d
N/A
10,738
passmark_gpu_compute
N/A
5,192

Analysis: AMD Instinct MI325X vs NVIDIA GeForce RTX 3050 6 GB

The Verdict

The recorded data presents an extreme asymmetry. The AMD Instinct MI325X is a data center accelerator with no benchmark entries, no display outputs, and no consumer API support. The NVIDIA GeForce RTX 3050 6 GB is an end-of-life consumer graphics card with eight recorded benchmark scores, a 15th percentile ranking among all GPUs, and a launch MSRP of 179 USD. The MI325X sits at the 50th percentile in the database, but with an average benchmark score of zero, that percentile reflects its position among all tracked accelerators, not measured performance. The RTX 3050 6 GB, by contrast, has an average benchmark score of 2329. The data does not support any direct performance comparison, because the MI325X has no recorded benchmarks. The verdict, strictly from the data: the RTX 3050 6 GB is the only one of the two with measurable consumer-facing performance, while the MI325X is a compute-oriented accelerator with no consumer software ecosystem.

Where Each One Wins

The RTX 3050 6 GB wins in every category where data exists. It supports DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4. It has 18 ray tracing cores and 72 tensor cores. It outputs video through 1x HDMI 2.1 and 3x DisplayPort 1.4a. The MI325X has no display outputs, no DirectX support, no OpenGL support, and no Vulkan support, all marked as N/A. The RTX 3050 6 GB also has a production status of end-of-life, meaning it is a finished product with a clear market position, while the MI325X has no production status recorded. In compute workloads, the MI325X theoretically dominates on paper specifications: 256 GB of HBM3e memory versus 6 GB of GDDR6, 8192-bit bus versus 96-bit, 6.14 TB/s bandwidth versus 168.0 GB/s, and 81.72 TFLOPS FP32 versus 6.774 TFLOPS. But without benchmarks, those specifications remain unverified in the database. The RTX 3050 6 GB delivers measurable results across DirectX 9 through 12, plus compute and 2D tests. The MI325X delivers none.

Head-to-Head Benchmarks

There are no head-to-head benchmark entries in the database. The wins counter shows 0 for both products. The MI325X has an empty benchmarks array, meaning no recorded tests exist. The RTX 3050 6 GB has eight recorded tests. Its strongest result is the Passmark G3D score of 10738, which measures general 3D graphics performance. Its Passmark GPU compute score is 5192. DirectX 9 returns 124, DirectX 10 returns 59, DirectX 11 returns 72, and DirectX 12 returns 53. The 2D graphics score is 882. In 3DMark Steel Nomad DX12, it scores 1515. The nearest rivals in the database for the RTX 3050 6 GB are the NVIDIA GeForce GT 640M with an average score of 2335 and a delta of -0.3%, the NVIDIA Quadro P620 at 2339 with -0.4%, the Intel HD Graphics 510 at 2305 with +1%, and the NVIDIA GeForce GT 550M at 2363 with -1.4%. These deltas are all within 1.4% of the RTX 3050 6 GB's average of 2329, meaning the recorded performance is tightly clustered around these older or lower-tier parts. The MI325X has no nearest rivals listed, which further confirms the absence of comparative data.

FAQ

Q: Does the AMD Instinct MI325X have any benchmark scores in the database?

A: No. The benchmarks array for the MI325X is empty, and the average benchmark score is 0. The wins counter for head-to-head benchmarks is also 0.

Q: What is the RTX 3050 6 GB's best recorded benchmark result?

A: The highest score is 10738 in the Passmark G3D test. The next highest is 5192 in Passmark GPU compute, followed by 1515 in 3DMark Steel Nomad DX12.

Q: Which product has a higher percentile ranking?

A: The MI325X is at the 50th percentile among all GPUs, while the RTX 3050 6 GB is at the 15th percentile. However, the MI325X's percentile is based on no benchmark data, so the ranking reflects its classification as an accelerator rather than measured performance.

Q: Does the MI325X support any consumer graphics APIs?

A: No. The database records DirectX, OpenGL, and Vulkan support as N/A for the MI325X. It also lists no display outputs, meaning it cannot drive a monitor.

Q: How does the RTX 3050 6 GB compare to its nearest rivals?

A: The closest rival is the NVIDIA GeForce GT 640M with an average score of 2335, which is 0.3% lower than the RTX 3050 6 GB's 2329. The Intel HD Graphics 510 is 1% higher at 2305, while the Quadro P620 is 0.4% lower.

Q: What memory configurations do the two products use?

A: The MI325X uses 256 GB of HBM3e on an 8192-bit bus with 6.14 TB/s bandwidth. The RTX 3050 6 GB uses 6 GB of GDDR6 on a 96-bit bus with 168.0 GB/s bandwidth.

Architecture Differences

The two products come from fundamentally different design philosophies. The MI325X uses the CDNA 3.0 architecture on a chip called Aqua Vanjaram, built on a 5 nm process at TSMC. It integrates 153,000 million transistors on a 1017 mm² die, yielding a transistor density of 150.4 million per square millimeter. The RTX 3050 6 GB uses the Ampere architecture on the GA107 chip, built on an 8 nm process at Samsung. It contains 8,700 million transistors on a 200 mm² die, with a density of 43.5 million per square millimeter. The MI325X has 19,456 shading units and 1,216 texture mapping units, but zero ROPs and no ray tracing or tensor cores. The RTX 3050 6 GB has 2,304 shading units, 72 TMUs, 32 ROPs, 18 ray tracing cores, and 72 tensor cores. The MI325X's pixel rate is recorded as 0 MPixel/s, while its texture rate is 2,553.6 GTexel/s. The RTX 3050 6 GB delivers 47.04 GPixel/s and 105.8 GTexel/s. The MI325X's FP32 throughput is 81.72 TFLOPS, and its FP16 is also 81.72 TFLOPS at a 1:1 ratio. The RTX 3050 6 GB achieves 6.774 TFLOPS in both FP32 and FP16, also at 1:1. The MI325X is built for matrix and vector compute at scale, while the RTX 3050 6 GB is built for rasterization, ray tracing, and tensor-accelerated workloads.

Specification Differences

The most direct differences appear in the recorded fields. The MI325X has a base clock of 1000 MHz and a boost clock of 2100 MHz, while the RTX 3050 6 GB runs at 1042 MHz base and 1470 MHz boost. Memory clocks differ: the MI325X runs at 1500 MHz with 6 Gbps effective, the RTX 3050 6 GB at 1750 MHz with 14 Gbps effective. The MI325X uses an OAM Module slot width, the RTX 3050 6 GB is a dual-slot card. Neither uses power connectors, but the MI325X has a TDP of 1000 W and a suggested PSU of 1400 W, while the RTX 3050 6 GB has a TDP of 70 W and a suggested PSU of 250 W. The bus interface differs: PCIe 5.0 x16 for the MI325X, PCIe 4.0 x8 for the RTX 3050 6 GB. The MI325X has no display outputs; the RTX 3050 6 GB has 1x HDMI 2.1 and 3x DisplayPort 1.4a. The MI325X measures no dimensions in the database, while the RTX 3050 6 GB is 242 mm long and 112 mm high. The MI325X was released on 2024-10-09, the RTX 3050 6 GB on 2024-02-01. The MI325X's predecessor is Radeon Instinct, the RTX 3050 6 GB's predecessor is GeForce 20 and successor is GeForce 40. The RTX 3050 6 GB has a launch MSRP of 179 USD; the MI325X has no recorded MSRP. The MI325X has no production status, while the RTX 3050 6 GB is marked end-of-life. The MI325X has no API support, while the RTX 3050 6 GB supports DirectX 12 Ultimate, OpenGL 4.6, and Vulkan 1.4. The transistor counts differ by a factor of roughly 17.6, the die sizes by a factor of 5.1, and the memory capacities by a factor of 42.7. These are not competing products in any measurable sense; the data shows two devices occupying separate market segments with no overlap in recorded performance.

DETAILED SPECIFICATIONS

SPECIFICATION
Instinct MI325X
RTX 3050 6 GB
Core Specs
Shading Units
19,456
2,304 -88.2%
Shaders
19,456
2,304 -88.2%
TMUs
1,216
72 -94.1%
ROPs
0
32 +∞%
Compute Units
304
—
SM Count
—
18
Clocks
Base Clock
1000 MHz
1042 MHz
Boost Clock
2100 MHz
1470 MHz
Memory Clock
1500 MHz 6 Gbps effective
1750 MHz 14 Gbps effective
Memory
Memory Size
256 GB
6 GB
VRAM (MB)
262,144
6,144 -97.7%
Memory Type
HBM3e
GDDR6
Memory Bus
8192 bit
96 bit
Bandwidth
6.14 TB/s
168.0 GB/s
Cache
L1 Cache
16 KB (per CU)
128 KB (per SM)
L2 Cache
16 MB
2 MB
L3 Cache
256 MB
—
Performance
Pixel Rate
0 MPixel/s
47.04 GPixel/s
Texture Rate
2,553.6 GTexel/s
105.8 GTexel/s
FP32 (TFLOPS)
81.72 TFLOPS
6.774 TFLOPS
FP64 (TFLOPS)
40.86 TFLOPS (1:2)
105.8 GFLOPS (1:64)
FP16 (TFLOPS)
81.72 TFLOPS (1:1)
6.774 TFLOPS (1:1)
AI/RT
RT Cores
—
18
Tensor Cores
—
72
Matrix Cores
1,216
—
Power
TDP
1000 W
70 W
TDP (W)
1,000
70 -93.0%
Suggested PSU
1400 W
250 W
Power Connectors
None
None
Architecture
Architecture
CDNA 3.0
Ampere
GPU Name
Aqua Vanjaram
GA107
Generation
Instinct (MIx)
GeForce 30
Process Size
5 nm
8 nm
Transistors
153,000 million
8,700 million
Die Size
1017 mm²
200 mm²
Foundry
TSMC
Samsung
Density
150.4M / mm²
43.5M / mm²
AMD MCM
MCM
2
—
API Support
DirectX
—
12 Ultimate (12_2)
OpenGL
—
4.6
Vulkan
—
1.4
OpenCL
3.0
3.0
CUDA
—
8.6
Shader Model
—
6.9
Physical
Slot Width
OAM Module
Dual-slot
Length
—
242 mm 9.5 inches
Height
—
112 mm 4.4 inches
Outputs
No outputs
1x HDMI 2.13x DisplayPort 1.4a
Bus Interface
PCIe 5.0 x16
PCIe 4.0 x8
Other
Launch Price
—
179 USD
Production
—
End-of-life
Predecessor
Radeon Instinct
GeForce 20
Successor
—
GeForce 40
View Instinct MI325X Details View GeForce RTX 3050 6 GB Details