AMD FirePro W600 vs NVIDIA RTX PRO 5000 72 GB Blackwell Comparison
AMD FirePro W600
RTX PRO 5000 72 GB Blackwell
PERFORMANCE BENCHMARKS
Analysis: AMD FirePro W600 vs NVIDIA RTX PRO 5000 72 GB Blackwell
The Verdict
The data presents a stark generational contrast. The NVIDIA RTX PRO 5000 72 GB Blackwell is a current-generation, high-capacity workstation card built on TSMC's 5 nm process, while the AMD FirePro W600 is an end-of-life, entry-level professional GPU from the GCN 1.0 era on 28 nm. Based strictly on the benchmark results, the NVIDIA card is in a completely different performance class, with its average benchmark score of 6407 slightly exceeding the AMD card's 6223, though both sit near the 36th-37th percentile of all GPUs.
The RTX PRO 5000 is the clear choice for any modern professional workload involving large datasets, ray tracing, or AI-accelerated tasks, given its 72 GB of GDDR7 memory, 110 RT cores, and 440 tensor cores. The FirePro W600, with its 2 GB GDDR5 memory and 512 shading units, is only relevant for legacy multi-display setups, as it offers six mini-DisplayPort outputs, but its compute capabilities are severely limited by modern standards. The verdict is unambiguous: the RTX PRO 5000 is for current high-end workstations, while the FirePro W600 is a relic suited only for basic display output or retro compatibility.
Architecture Differences
The architectural divide between these two GPUs is enormous. The NVIDIA RTX PRO 5000 Blackwell uses the GB202 chip based on the Blackwell 2.0 architecture, manufactured on a 5 nm process at TSMC. It integrates 92,200 million transistors on a 750 mm² die, yielding a transistor density of 122.9 million per square millimeter. In contrast, the AMD FirePro W600 uses the Cape Verde chip based on the older GCN 1.0 architecture, built on a 28 nm process. It contains a mere 1,500 million transistors on a 123 mm² die, with a transistor density of 12.2 million per square millimeter.
The memory subsystems are equally divergent. The RTX PRO 5000 features 72 GB of GDDR7 memory on a 384-bit bus, delivering 1.34 TB/s of bandwidth. The FirePro W600 offers only 2 GB of GDDR5 on a 128-bit bus, with 64.00 GB/s bandwidth. In terms of compute resources, the NVIDIA card has 14,080 shading units, 440 TMUs, and 160 ROPs, alongside 110 RT cores and 440 tensor cores. The AMD card has 512 shading units, 32 TMUs, and 16 ROPs, with no dedicated ray tracing or tensor cores. The NVIDIA card also supports PCIe 5.0 x16, while the FirePro W600 uses PCIe 3.0 x16.
Feature support differs significantly. The RTX PRO 5000 supports DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4. The FirePro W600 supports DirectX 12 (11_1), OpenGL 4.6, and Vulkan 1.2.170. Display outputs also differ: the NVIDIA card has four DisplayPort 2.1b connections, while the AMD card has six mini-DisplayPort 1.2 outputs. Power requirements are distinct, with the RTX PRO 5000 rated at 300 W TDP requiring a 16-pin connector and 700 W suggested PSU, versus the FirePro W600's 75 W TDP with no power connectors and a 250 W suggested PSU.
FAQ
Q: Which GPU has a higher average benchmark score?
A: The NVIDIA RTX PRO 5000 72 GB Blackwell has an average benchmark score of 6407, which is slightly higher than the AMD FirePro W600's average of 6223.
Q: What is the memory capacity difference between the two cards?
A: The RTX PRO 5000 has 72 GB of GDDR7 memory on a 384-bit bus, while the FirePro W600 has 2 GB of GDDR5 memory on a 128-bit bus. This means the NVIDIA card has 36 times more memory capacity.
Q: Does the AMD FirePro W600 support ray tracing?
A: No. The FirePro W600 has no RT cores listed in its specifications, while the RTX PRO 5000 includes 110 RT cores for hardware-accelerated ray tracing.
Q: What is the FP32 compute performance of each card?
A: The RTX PRO 5000 delivers 66.94 TFLOPS of FP32 performance. The FirePro W600 delivers 768.0 GFLOPS, which is substantially lower.
Q: Which card has a higher pixel fill rate?
A: The RTX PRO 5000 has a pixel rate of 380.3 GPixel/s, compared to the FirePro W600's 12.00 GPixel/s, indicating the NVIDIA card is over 30 times faster in this metric.
Q: What is the production status of each GPU?
A: The NVIDIA RTX PRO 5000 is listed as "Active" production, while the AMD FirePro W600 is "End-of-life."
Specification Differences
The two cards diverge on nearly every specification field. The process node differs: 5 nm for the RTX PRO 5000 versus 28 nm for the FirePro W600. Transistor counts are 92,200 million versus 1,500 million. Die size is 750 mm² versus 123 mm². Clocks differ significantly: the NVIDIA card has a base clock of 1740 MHz and boost of 2377 MHz, while the AMD card has no base or boost clock listed, only a memory clock of 1000 MHz (4 Gbps effective). The RTX PRO 5000's memory clock is 1750 MHz (28 Gbps effective).
Memory specifications show 72 GB GDDR7 with 1.34 TB/s bandwidth versus 2 GB GDDR5 with 64.00 GB/s bandwidth. Shading units are 14,080 versus 512. TMUs are 440 versus 32. ROPs are 160 versus 16. The RTX PRO 5000 has 110 RT cores and 440 tensor cores; the FirePro W600 has none. Pixel rates are 380.3 GPixel/s versus 12.00 GPixel/s. Texture rates are 1,045.9 GTexel/s versus 24.00 GTexel/s. FP32 performance is 66.94 TFLOPS versus 768.0 GFLOPS. The FirePro W600 has no listed FP16 performance, while the RTX PRO 5000 achieves 66.94 TFLOPS (1:1).
Power profiles differ: 300 W TDP with a 16-pin connector and 700 W suggested PSU versus 75 W TDP with no connectors and 250 W suggested PSU. The RTX PRO 5000 is dual-slot with dimensions of 267 mm length, 111 mm height, and 40 mm width. The FirePro W600 is single-slot at 168 mm length, 111 mm height, and 20 mm width. Bus interfaces are PCIe 5.0 x16 versus PCIe 3.0 x16. Display outputs are 4x DisplayPort 2.1b versus 6x mini-DisplayPort 1.2. Release dates are 2025-10-20 versus 2012-06-12. The FirePro W600 has a launch MSRP of 599 USD; the RTX PRO 5000 has no listed launch MSRP.
Head-to-Head Benchmarks
There are no direct head-to-head benchmark entries in the data, and the win counts are zero for both cards. However, comparing their individual benchmark suites reveals the performance gulf. The RTX PRO 5000 has a comprehensive set of results across multiple tests. In 3DMark Steel Nomad DX12, it scores 9579.5. In PassMark tests, it achieves 175 in DirectX 10, 219 in DirectX 11, 78 in DirectX 12, and 311 in DirectX 9. Its PassMark G2D score is 914, G3D score is 24310, and GPU Compute score is 15667.
The FirePro W600 has only one benchmark result: a Geekbench OpenCL score of 6223. This single score is lower than the RTX PRO 5000's average benchmark score of 6407, which itself includes multiple tests. The NVIDIA card's PassMark G3D score of 24310 is nearly four times higher than the AMD card's only benchmark score. The RTX PRO 5000's GPU Compute score of 15667 is also more than double the FirePro's Geekbench result, indicating superior compute throughput.
Looking at nearest rivals provides additional context. The RTX PRO 5000's average score of 6407 places it 0.3% ahead of the NVIDIA GeForce GTX 460 SE (6389) and GTX 580M (6389), and 1.1% behind the AMD Radeon Vega 10 Mobile (6476) and NVIDIA Quadro M5000M (6481). The FirePro W600's average of 6223 is 0.2% above the AMD Radeon HD 6950 (6210) and 0.7-0.9% behind the NVIDIA GeForce RTX 4070 Ti SUPER AD102 and RTX 5070 Ti SUPER (both 6270) and the Quadro K620 (6282). These percentile rankings highlight that neither card is a top performer globally, but the RTX PRO 5000's raw scores in individual tests are vastly higher.
Where Each One Wins
The RTX PRO 5000 wins in every compute and graphics metric where data exists. For modern 3D rendering and DirectX 12 workloads, its 3DMark Steel Nomad score of 9579.5 and PassMark DirectX 12 score of 78, while modest, far exceed any comparable metric for the FirePro W600, which has no DirectX 12 benchmark result. The NVIDIA card's FP32 performance of 66.94 TFLOPS makes it suitable for scientific simulation, AI training, and complex visualization tasks, supported by 440 tensor cores and 110 RT cores. Its 72 GB memory capacity is ideal for large language models, massive point clouds, or 8K video editing, with 1.34 TB/s bandwidth ensuring data flows quickly.
The FirePro W600's only clear advantage is in multi-display output. With six mini-DisplayPort 1.2 connections, it can drive more monitors simultaneously than the RTX PRO 5000's four DisplayPort 2.1b outputs. This makes it potentially useful for digital signage, trading floors, or legacy multi-monitor setups where compute performance is irrelevant. Its single-slot design and 75 W TDP with no power connectors also make it easier to install in compact or low-power systems. However, its 2 GB memory and 64.00 GB/s bandwidth severely limit any modern compute usage, and its 512 shading units produce only 768.0 GFLOPS of FP32 performance, which is negligible for professional workloads.
For users prioritizing raw performance, modern API support, or AI capabilities, the RTX PRO 5000 is the only viable option. For those needing maximum display count with minimal power draw and physical footprint, the FirePro W600 retains a niche, albeit with end-of-life status and no path forward for modern software requirements. The data clearly shows the RTX PRO 5000 as the dominant performer across all benchmark categories, while the FirePro W600's legacy role is confined to basic display tasks.