AMD FirePro W5130M vs NVIDIA GeForce RTX 5060 Ti 8 GB Comparison
AMD FirePro W5130M
GeForce RTX 5060 Ti 8 GB
PERFORMANCE BENCHMARKS
Analysis: AMD FirePro W5130M vs NVIDIA GeForce RTX 5060 Ti 8 GB
The AMD FirePro W5130M and NVIDIA GeForce RTX 5060 Ti 8 GB occupy the same 29th percentile in the database’s aggregate rankings, with average benchmark scores of 4904 and 4901 respectively. This near-perfect statistical tie, a delta of just 0.1% in favor of the AMD part, is remarkable given the generational gulf between the two products. The FirePro W5130M is an end-of-life mobile workstation part from 2015, while the RTX 5060 Ti is an active desktop consumer card released in 2025. The data shows that while their overall average scores are statistically indistinguishable, the underlying architectures, specifications, and feature sets could not be more different. This creates a unique situation where the choice between them depends almost entirely on the specific workload and platform constraints, rather than raw aggregate performance.
The Verdict
The benchmark data presents a peculiar case: the AMD FirePro W5130M and NVIDIA GeForce RTX 5060 Ti 8 GB are effectively tied in aggregate score, with the AMD card leading by a mere 0.1% (4904 vs 4901). For any user strictly looking at the average benchmark number, either card would deliver nearly identical results in the specific test measured. However, the data strongly suggests these cards should be chosen for entirely different reasons and environments. The FirePro W5130M, with its 2 GB GDDR5 memory and 64.00 GB/s bandwidth, is suited only for legacy mobile workstation tasks where its 28 nm GCN 1.0 architecture and PCIe 3.0 x16 interface are acceptable. The RTX 5060 Ti, by contrast, offers 8 GB of GDDR7 memory with 448.0 GB/s bandwidth, a 5 nm Blackwell 2.0 design, and modern PCIe 5.0 x8 connectivity.
The RTX 5060 Ti is the clear choice for anyone needing modern API support, as it features DirectX 12 Ultimate (12_2) and Vulkan 1.4, compared to the FirePro's DirectX 12 (11_1) and Vulkan 1.2.170. The RTX 5060 Ti also brings dedicated ray tracing cores (36) and tensor cores (144), which the FirePro completely lacks. For compute-heavy or graphics-intensive workloads that can leverage these features, the RTX 5060 Ti is overwhelmingly superior. The FirePro W5130M should be selected only for specific legacy mobile workstation deployments where its 2 GB memory footprint and older driver ecosystem are required, and where the system cannot accommodate a dual-slot, 180 W desktop card. The RTX 5060 Ti's launch MSRP is 379 USD, and it is an active product, whereas the FirePro is end-of-life, making the NVIDIA card the only sensible choice for any new system build.
FAQ
Q: Which card has the higher average benchmark score?
A: The AMD FirePro W5130M has a marginally higher average benchmark score of 4904, compared to the NVIDIA GeForce RTX 5060 Ti 8 GB's 4901. This represents a delta of 0.1% in favor of the AMD card.
Q: How do the two cards compare in terms of memory bandwidth?
A: The NVIDIA RTX 5060 Ti has significantly higher memory bandwidth at 448.0 GB/s, using 8 GB of GDDR7 memory on a 128-bit bus. The AMD FirePro W5130M offers 64.00 GB/s with 2 GB of GDDR5 memory on the same 128-bit bus width.
Q: What are the key architectural differences between the two GPUs?
A: The FirePro W5130M uses AMD's GCN 1.0 architecture on a 28 nm process with 1,500 million transistors, while the RTX 5060 Ti uses NVIDIA's Blackwell 2.0 architecture on a 5 nm process with 21,900 million transistors. The RTX 5060 Ti also includes 36 ray tracing cores and 144 tensor cores, which the FirePro lacks entirely.
Q: Which card supports newer graphics APIs?
A: The NVIDIA RTX 5060 Ti supports DirectX 12 Ultimate (12_2) and Vulkan 1.4, while the AMD FirePro W5130M supports DirectX 12 (11_1) and Vulkan 1.2.170. Both support OpenGL 4.6.
Q: What is the difference in transistor density between the two chips?
A: The RTX 5060 Ti's GB206 chip has a transistor density of 121.0M per mm², which is nearly ten times higher than the FirePro W5130M's Tropo chip at 12.2M per mm². The RTX 5060 Ti packs 21,900 million transistors into a 181 mm² die, while the FirePro has 1,500 million transistors on a 123 mm² die.
Q: Are there any benchmark tests where the two cards are compared directly?
A: No. The head-to-head benchmark data is empty, meaning there are no direct comparative test results. The only available data is their individual average scores from different benchmark suites, which places them within 0.1% of each other.
Architecture Differences
The architectural gap between these two GPUs is vast, reflecting nearly a decade of semiconductor evolution. The AMD FirePro W5130M is built on the GCN 1.0 architecture using TSMC's 28 nm process node, featuring 1,500 million transistors on a 123 mm² die. This yields a transistor density of 12.2M per mm². In contrast, the NVIDIA GeForce RTX 5060 Ti employs the Blackwell 2.0 architecture on a 5 nm process, also from TSMC, but packs 21,900 million transistors into a slightly larger 181 mm² die, achieving a density of 121.0M per mm². This represents a fundamental shift in manufacturing capability.
The compute resources differ dramatically. The FirePro W5130M has 512 shading units, 32 texture mapping units, and 16 raster operations pipelines. The RTX 5060 Ti ships with 4608 shading units, 144 TMUs, and 48 ROPs. More importantly, the RTX 5060 Ti introduces dedicated hardware that the FirePro simply does not have: 36 ray tracing cores and 144 tensor cores. These enable features like real-time ray tracing and AI-accelerated workloads, which are entirely absent from the older AMD architecture. The FirePro's GCN 1.0 design predates these specialized units, relying on general-purpose shader cores for all computation.
The memory subsystem also reflects architectural evolution. The FirePro uses 2 GB of GDDR5 with a 128-bit bus, achieving 64.00 GB/s bandwidth. The RTX 5060 Ti uses 8 GB of GDDR7 on the same 128-bit bus but achieves 448.0 GB/s, a 7x increase in bandwidth. The clock speeds tell a similar story, with the FirePro's base clock of 900 MHz and boost of 925 MHz versus the RTX 5060 Ti's 2407 MHz base and 2572 MHz boost. The RTX 5060 Ti also supports PCIe 5.0 x8, while the FirePro is limited to PCIe 3.0 x16. These architectural differences manifest in the RTX 5060 Ti's FP32 performance of 23.70 TFLOPS, compared to the FirePro's 947.2 GFLOPS.
Specification Differences
The specification sheets for these two cards reveal almost no common ground beyond the 128-bit memory bus width. The process node differs by generations: 28 nm for the FirePro W5130M versus 5 nm for the RTX 5060 Ti. Transistor counts are 1,500 million versus 21,900 million, and die sizes are 123 mm² versus 181 mm². Clock speeds are drastically different, with the FirePro boosting to 925 MHz and the RTX 5060 Ti boosting to 2572 MHz. Memory configurations diverge completely: 2 GB GDDR5 at 64.00 GB/s versus 8 GB GDDR7 at 448.0 GB/s.
The compute unit counts are equally disparate. The FirePro has 512 shading units, 32 TMUs, and 16 ROPs, while the RTX 5060 Ti has 4608 shading units, 144 TMUs, and 48 ROPs. The RTX 5060 Ti adds 36 ray tracing cores and 144 tensor cores, features that do not exist on the FirePro. Pixel and texture rates illustrate the performance gap: 14.80 GPixel/s and 29.60 GTexel/s for the FirePro versus 123.5 GPixel/s and 370.4 GTexel/s for the RTX 5060 Ti. FP32 compute is 947.2 GFLOPS versus 23.70 TFLOPS, a 25x difference. The RTX 5060 Ti also supports FP16 at 23.70 TFLOPS (1:1), while the FirePro has no listed FP16 capability.
Connectivity and power draw also differ sharply. The FirePro uses PCIe 3.0 x16, while the RTX 5060 Ti uses PCIe 5.0 x8. The RTX 5060 Ti has a 180 W TDP, requires a dual-slot cooler, a single 8-pin power connector, and a 450 W suggested PSU. The FirePro lists no TDP, slot width, or power connector information. Display outputs are only listed for the RTX 5060 Ti: 1x HDMI 2.1b and 3x DisplayPort 2.1b. The RTX 5060 Ti measures 241 mm in length, 111 mm in height, and 40 mm in width. API support favors the NVIDIA card with DirectX 12 Ultimate (12_2) and Vulkan 1.4, versus DirectX 12 (11_1) and Vulkan 1.2.170 for the AMD part. Production status marks the FirePro as end-of-life, while the RTX 5060 Ti is active.
Head-to-Head Benchmarks
The database contains no direct head-to-head benchmark results between these two cards, and neither has a win recorded in such comparisons. However, their individual benchmark profiles provide some insight into their respective strengths. The FirePro W5130M has a single benchmark entry: a Geekbench OpenCL score of 4904. This single data point places it at the 29th percentile of all GPUs. Its nearest rivals include the RTX 5060 Ti with an average score of 4901 (0.1% lower), the NVIDIA GeForce GTS 450 at 4893 (0.2% lower), and the AMD Radeon R7 M265 at 4929 (0.5% higher).
The RTX 5060 Ti, by contrast, has a much richer benchmark profile, though its average score of 4901 is dragged down by several low-scoring tests. Its Passmark scores show a wide range: 142 in DirectX 10, 220 in DirectX 11, 82 in DirectX 12, 228 in DirectX 9, 1169 in G2D, 21981 in G3D, and 11365 in GPU Compute. It also has a 3DMark Steel Nomad DX12 score of 4019. The massive discrepancy between the Passmark G3D score of 21981 and the average score of 4901 suggests that the average is heavily weighted by lower-performing tests or that the benchmark suite produces inconsistent results for this card.
The FirePro's single Geekbench OpenCL score of 4904 is remarkably close to the RTX 5060 Ti's average of 4901, yet this parity is misleading. The RTX 5060 Ti's Passmark G3D score of 21981 is over four times higher than the FirePro's entire average, and its GPU Compute score of 11365 is more than double. The RTX 5060 Ti's 3DMark Steel Nomad DX12 result of 4019 represents modern DirectX 12 gaming performance that the FirePro cannot approach, given its older DirectX 12 (11_1) support. The data indicates that while aggregate averages align, the RTX 5060 Ti excels in modern, feature-rich workloads, whereas the FirePro's score reflects a single legacy compute test. The 0.1% delta between them is statistically insignificant, but the benchmark distribution for the RTX 5060 Ti shows far higher peak performance in specific tests.