AMD FirePro W5130M vs AMD Radeon RX 9060 XT 16 GB Comparison

AMD
RADEON

AMD FirePro W5130M

CORE STATE Tropo
VRAM 2 GB
CLOCK SPEED 925 MHz
TDP —
BUS WIDTH 128 bit
ARCHITECTURE GCN 1.0
nm
PROCESS 28 nm
LAUNCH DATE 2015
VS
AMD
RADEON

Radeon RX 9060 XT 16 GB

CORE STATE Navi 44
VRAM 16 GB
CLOCK SPEED 3130 MHz
TDP 160 W
BUS WIDTH 128 bit
ARCHITECTURE RDNA 4.0
nm
PROCESS 4 nm
LAUNCH DATE 2025

PERFORMANCE BENCHMARKS

geekbench_opencl
4,904
N/A
3dmark_3dmark_steel_nomad_dx12
N/A
4,093
passmark_directx_10
N/A
116
passmark_directx_11
N/A
185
passmark_directx_12
N/A
57
passmark_directx_9
N/A
305
passmark_g2d
N/A
1,169
passmark_g3d
N/A
20,099
passmark_gpu_compute
N/A
11,234

Analysis: AMD FirePro W5130M vs AMD Radeon RX 9060 XT 16 GB

# AMD FirePro W5130M vs AMD Radeon RX 9060 XT 16 GB

The AMD FirePro W5130M is a 2015-era mobile workstation GPU built on the 28 nm GCN 1.0 architecture, while the AMD Radeon RX 9060 XT 16 GB is a 2025 desktop part using the 4 nm RDNA 4.0 architecture. The benchmark data shows a stark generational divide: the RX 9060 XT achieves a Passmark G3D score of 20099, while the FirePro W5130M posts a Geekbench OpenCL score of 4904. The newer card also carries a 160 W TDP, a dual-slot cooler, and a 1x 8-pin power connector, whereas the older mobile chip lacks published TDP, slot width, and power connector specifications. The RX 9060 XT is actively produced with a launch MSRP of 349 USD, while the FirePro W5130M is end-of-life.

FAQ

Q: Which GPU has the higher average benchmark score?

A: The AMD Radeon RX 9060 XT 16 GB has an average benchmark score of 4657, while the AMD FirePro W5130M scores 4904. Despite the newer architecture, the RX 9060 XT's average is slightly lower due to the different benchmark suites used.

Q: How do the two cards compare in raw compute throughput?

A: The RX 9060 XT delivers 25.64 TFLOPS of FP32 performance, more than 27 times the FirePro W5130M's 947.2 GFLOPS. The newer card also achieves 25.64 TFLOPS FP16 (1:1), while the older chip has no published FP16 figure.

Q: What are the memory configurations of each card?

A: The FirePro W5130M has 2 GB of GDDR5 on a 128-bit bus with 64.00 GB/s bandwidth. The RX 9060 XT has 16 GB of GDDR6 on a 128-bit bus with 322.3 GB/s bandwidth — eight times the capacity and roughly five times the bandwidth.

Q: Which card supports newer graphics APIs?

A: The RX 9060 XT supports DirectX 12 Ultimate (12_2) and Vulkan 1.4, while the FirePro W5130M supports DirectX 12 (11_1) and Vulkan 1.2.170. Both support OpenGL 4.6.

Q: What is the production status of each GPU?

A: The FirePro W5130M is end-of-life with a release date of October 1, 2015. The RX 9060 XT is active, released on June 3, 2025, and has no successor listed.

Q: How do the nearest rivals compare for each card?

A: The FirePro W5130M's closest rival is the AMD Radeon R7 M265, which is 0.5% faster, and it edges out the NVIDIA GeForce RTX 5060 Ti 8 GB by 0.1%. The RX 9060 XT's nearest rival is the AMD Radeon R5 M320 with a 0% delta, and it is 0.6% behind the NVIDIA Quadro P400.

The Verdict

The data makes the choice straightforward for nearly any use case. The AMD Radeon RX 9060 XT 16 GB is the superior GPU by every measurable performance metric: it has 4 times the shading units, 4 times the TMUs, 4 times the ROPs, and a 27-fold advantage in FP32 throughput. The Passmark G3D score of 20099 versus the FirePro W5130M's Geekbench OpenCL score of 4904 further underscores the gap, though the different benchmark suites make direct comparison imperfect.

Professionals who need a modern, actively supported GPU with 16 GB of memory, a dual-slot cooler, and a single 8-pin power connector should choose the RX 9060 XT. Its 160 W TDP and 450 W suggested PSU are reasonable for a desktop workstation. The FirePro W5130M, by contrast, is a mobile-only part with no published power requirements, 2 GB of memory, and an end-of-life status — it is only relevant for legacy systems that require the GCN 1.0 feature set.

There is no scenario from the data where the FirePro W5130M wins on capability. The RX 9060 XT also offers ray tracing with 32 RT cores, a feature entirely absent from the older chip. For anyone building or upgrading a system today, the RX 9060 XT is the only rational choice between these two.

Head-to-Head Benchmarks

The head-to-head benchmark list is empty, so the comparison rests on the individual benchmark suites reported for each card. The RX 9060 XT's Passmark G3D score of 20099 indicates strong overall 3D performance, while its Passmark GPU Compute score of 11234 shows capable compute workloads. The FirePro W5130M's Geekbench OpenCL score of 4904 reflects its mobile workstation heritage, but it is over 4 times lower than the newer card's compute result. In DirectX-specific tests, the RX 9060 XT scores 305 in Passmark DirectX 9, 185 in DirectX 11, 116 in DirectX 10, and 57 in DirectX 12 — a curious pattern where older API tests score higher, likely due to driver optimization priorities. The FirePro W5130M has no comparable DirectX scores in the data.

The nearest rival data for the FirePro W5130M shows it clustering tightly with mid-range 2015-era parts: the NVIDIA GeForce RTX 5060 Ti 8 GB scores 4901 (0.1% behind), the NVIDIA GeForce GTS 450 scores 4893 (0.2% behind), and the AMD Radeon R7 M265 scores 4929 (0.5% ahead). This tight grouping suggests the W5130M sits in a narrow performance band. The RX 9060 XT's rivals are similarly close: the AMD Radeon R5 M320 matches its 4657 average exactly, the NVIDIA Quadro P400 is 0.6% ahead, and the NVIDIA GeForce GTX 970M is 0.6% behind. Despite the vast architectural differences between these two cards, both land in the 27th–29th percentile of all GPUs, indicating that the benchmark database's scoring methodology captures a wide range of hardware generations.

Specification Differences

The two cards differ in nearly every specification field. The FirePro W5130M uses a 28 nm process with 1,500 million transistors on a 123 mm² die, while the RX 9060 XT uses a 4 nm process with 29,700 million transistors on a 199 mm² die — a 19.8 times increase in transistor count and a 12.2 times increase in transistor density (149.2M / mm² versus 12.2M / mm²). Clock speeds show a similar gap: the W5130M has a 900 MHz base and 925 MHz boost, while the RX 9060 XT has a 1700 MHz base, 2530 MHz game clock, and 3130 MHz boost. Memory clocks differ as well: 1000 MHz (4 Gbps effective) on the older card versus 2518 MHz (20.1 Gbps effective) on the newer one.

The memory subsystem is another major divergence. The W5130M offers 2 GB GDDR5, while the RX 9060 XT offers 16 GB GDDR6 — both on a 128-bit bus, but with bandwidth of 64.00 GB/s versus 322.3 GB/s respectively. The compute units scale proportionally: 512 shading units, 32 TMUs, and 16 ROPs on the W5130M versus 2048 shading units, 128 TMUs, and 64 ROPs on the RX 9060 XT. Pixel rate jumps from 14.80 GPixel/s to 200.3 GPixel/s, and texture rate from 29.60 GTexel/s to 400.6 GTexel/s. The RX 9060 XT also has 32 RT cores, a feature absent from the W5130M. Power delivery differs significantly: the RX 9060 XT is a dual-slot card with a 160 W TDP, a 1x 8-pin power connector, and a 450 W suggested PSU, while the W5130M has no published TDP, slot width, or power connector data. The bus interface advances from PCIe 3.0 x16 to PCIe 5.0 x16, and display outputs on the RX 9060 XT include 1x HDMI 2.1b and 2x DisplayPort 2.1a, with no output information for the older mobile chip.

Architecture Differences

The architectural gap between these two GPUs spans a decade of AMD design evolution. The FirePro W5130M is built on GCN 1.0 (chip "Tropo"), a first-generation Graphics Core Next design that debuted in 2012. The RX 9060 XT uses RDNA 4.0 (chip "Navi 44", codename "Strix Point"), the latest iteration of AMD's Radeon DNA architecture. The generational nomenclature reflects this: the W5130M belongs to the FirePro Mobile (Wx100M) generation, while the RX 9060 XT is part of the Navi IV (RX 9000) series within the Radeon RX 9000 series lineup.

The process node is the most fundamental difference: 28 nm at TSMC for the older chip versus 4 nm at TSMC for the newer one. This allows the RX 9060 XT to pack 29,700 million transistors into a 199 mm² die, compared to just 1,500 million in a 123 mm² die for the W5130M. The transistor density improvement is dramatic — 149.2M / mm² versus 12.2M / mm² — enabling 4 times the shading units, 4 times the TMUs, and 4 times the ROPs. The RX 9060 XT adds dedicated ray tracing hardware with 32 RT cores, a capability entirely missing from the GCN 1.0 design. The API support also reflects the architectural evolution: DirectX 12 Ultimate (12_2) with hardware ray tracing support on the RX 9060 XT versus DirectX 12 (11_1) on the W5130M, and Vulkan 1.4 versus Vulkan 1.2.170. FP16 compute on the RX 9060 XT runs at a 1:1 ratio with FP32 at 25.64 TFLOPS, while the W5130M has no listed FP16 capability. The RX 9060 XT's 25.64 TFLOPS FP32 and 25.64 TFLOPS FP16 (1:1) represent a massive throughput advantage over the W5130M's 947.2 GFLOPS, reflecting not just more cores but a fundamentally more efficient architecture per clock. The production status confirms the trajectory: the W5130M is end-of-life with a predecessor of FirePro Mobility and successor of Radeon Pro Mobile, while the RX 9060 XT is active with a predecessor of Navi III and no successor listed.

DETAILED SPECIFICATIONS

SPECIFICATION
FirePro W5130M
RX 9060 XT 16 GB
Core Specs
Shading Units
512
2,048 +300.0%
Shaders
512
2,048 +300.0%
TMUs
32
128 +300.0%
ROPs
16
64 +300.0%
Compute Units
8
32 +300.0%
Clocks
Base Clock
900 MHz
1700 MHz
Boost Clock
925 MHz
3130 MHz
Game Clock
—
2530 MHz
Memory Clock
1000 MHz 4 Gbps effective
2518 MHz 20.1 Gbps effective
Memory
Memory Size
2 GB
16 GB
VRAM (MB)
2,048
16,384 +700.0%
Memory Type
GDDR5
GDDR6
Memory Bus
128 bit
128 bit
Bandwidth
64.00 GB/s
322.3 GB/s
Cache
L1 Cache
16 KB (per CU)
—
L2 Cache
256 KB
4 MB
L3 Cache
—
32 MB
L0 Cache
—
32 KB per WGP
Performance
Pixel Rate
14.80 GPixel/s
200.3 GPixel/s
Texture Rate
29.60 GTexel/s
400.6 GTexel/s
FP32 (TFLOPS)
947.2 GFLOPS
25.64 TFLOPS
FP64 (TFLOPS)
59.20 GFLOPS (1:16)
801.3 GFLOPS (1:32)
FP16 (TFLOPS)
—
25.64 TFLOPS (1:1)
AI/RT
RT Cores
—
32
Matrix Cores
—
64
Power
TDP
—
160 W
TDP (W)
—
160
Suggested PSU
—
450 W
Power Connectors
—
1x 8-pin
Architecture
Architecture
GCN 1.0
RDNA 4.0
GPU Name
Tropo
Navi 44
Codename
—
Strix Point
Generation
FirePro Mobile (Wx100M)
Navi IV (RX 9000)
Process Size
28 nm
4 nm
Transistors
1,500 million
29,700 million
Die Size
123 mm²
199 mm²
Foundry
TSMC
TSMC
Density
12.2M / mm²
149.2M / mm²
API Support
DirectX
12 (11_1)
12 Ultimate (12_2)
OpenGL
4.6
4.6
Vulkan
1.2.170
1.4
OpenCL
2.1 (1.2)
2.2
Shader Model
6.5 (5.1)
6.9
Physical
Slot Width
—
Dual-slot
Outputs
—
1x HDMI 2.1b2x DisplayPort 2.1a
Bus Interface
PCIe 3.0 x16
PCIe 5.0 x16
Other
Launch Price
—
349 USD
Production
End-of-life
Active
Predecessor
FirePro Mobility
Navi III
Successor
Radeon Pro Mobile
—
View FirePro W5130M Details View Radeon RX 9060 XT 16 GB Details