AMD FirePro W4170M vs NVIDIA GeForce RTX 5060 Ti 8 GB Comparison

AMD
RADEON

AMD FirePro W4170M

CORE STATE Opal
VRAM 2 GB
CLOCK SPEED 900 MHz
TDP —
BUS WIDTH 128 bit
ARCHITECTURE GCN 1.0
nm
PROCESS 28 nm
LAUNCH DATE 2015
VS
NVIDIA
GEFORCE

GeForce RTX 5060 Ti 8 GB

CORE STATE GB206
VRAM 8 GB
CLOCK SPEED 2572 MHz
TDP 180 W
BUS WIDTH 128 bit
ARCHITECTURE Blackwell 2.0
nm
PROCESS 5 nm
LAUNCH DATE 2025

PERFORMANCE BENCHMARKS

geekbench_opencl
5,034
N/A
3dmark_3dmark_steel_nomad_dx12
N/A
4,019
passmark_directx_10
N/A
142
passmark_directx_11
N/A
220
passmark_directx_12
N/A
82
passmark_directx_9
N/A
228
passmark_g2d
N/A
1,169
passmark_g3d
N/A
21,981
passmark_gpu_compute
N/A
11,365

Analysis: AMD FirePro W4170M vs NVIDIA GeForce RTX 5060 Ti 8 GB

The AMD FirePro W4170M and NVIDIA GeForce RTX 5060 Ti 8 GB occupy opposite ends of the hardware spectrum, separated by a decade of architectural evolution. The data shows the RTX 5060 Ti 8 GB delivers a generational leap in raw compute and feature support, while the FirePro W4170M remains a legacy mobile workstation part with a benchmark profile that places it near the 30th percentile of all GPUs. The RTX 5060 Ti 8 GB, despite its modern specifications, also sits at the 29th percentile in the same aggregate ranking, a statistical artifact of its diverse benchmark test set rather than a reflection of comparable performance.

The Verdict

The data presents a clear split: the RTX 5060 Ti 8 GB is the only choice for any modern workload requiring current API support, high memory bandwidth, or ray tracing capabilities. Its 8 GB of GDDR7 memory and 448.0 GB/s bandwidth dwarf the FirePro W4170M's 2 GB GDDR5 and 64.00 GB/s, making the older card unsuitable for contemporary datasets. The FirePro W4170M, with its 2015 release date and end-of-life status, should only be considered for legacy system maintenance or applications specifically locked to its GCN 1.0 feature set. Benchmark results indicate the RTX 5060 Ti 8 GB achieves 23.70 TFLOPS FP32 performance versus the FirePro's 691.2 GFLOPS, a 34-fold advantage that no software optimization can bridge. For users with existing MXM-module systems requiring a drop-in replacement with old driver support, the FirePro W4170M remains functional, but for any new build or upgrade path, the RTX 5060 Ti 8 GB is the only rational selection based on the available data.

Architecture Differences

The architectural gap between these two GPUs is immense. The FirePro W4170M uses the GCN 1.0 architecture on a 28 nm TSMC process, packing 950 million transistors into a 77 mm² die. The RTX 5060 Ti 8 GB employs Blackwell 2.0 on a 5 nm TSMC node, integrating 21,900 million transistors across a 181 mm² die. This translates to a transistor density of 12.3M per mm² for the older chip versus 121.0M per mm² for the newer one, a 9.8-fold increase in packing efficiency. The RTX 5060 Ti 8 GB also introduces dedicated hardware absent from the FirePro: 36 ray tracing cores and 144 tensor cores enable features the GCN 1.0 part cannot emulate. The FirePro W4170M offers 384 shading units, 24 TMUs, and 8 ROPs, while the RTX 5060 Ti 8 GB provides 4,608 shading units, 144 TMUs, and 48 ROPs. API support diverges sharply, with the FirePro limited to DirectX 12 (11_1) and Vulkan 1.2.170, versus the RTX 5060 Ti 8 GB's DirectX 12 Ultimate (12_2) and Vulkan 1.4. The RTX 5060 Ti 8 GB also doubles FP16 throughput at a 1:1 ratio with FP32, whereas the FirePro lists no FP16 capability, confirming a fundamental design philosophy shift toward parallel compute flexibility.

Head-to-Head Benchmarks

Direct benchmark comparisons are limited by the disparate test suites in the data. The FirePro W4170M has a single Geekbench OpenCL score of 5,034, placing it at the 30th percentile. Its nearest rivals include the AMD Radeon R5 M430 at 5,018 (0.3% ahead) and the AMD Radeon R7 M340 at 5,063 (0.6% behind), indicating performance clustering tightly around the 5,000 mark. The RTX 5060 Ti 8 GB shows a different profile: its Passmark G3D score of 21,981 and GPU Compute score of 11,365 demonstrate substantial raw throughput in those specific tests, yet its average benchmark score across all tests is 4,901, with a 29th percentile ranking. This paradox arises from its Passmark DirectX 9 score of 228, DirectX 10 score of 142, DirectX 11 score of 220, and DirectX 12 score of 82 — all extremely low figures that drag the aggregate down. The 3DMark Steel Nomad DX12 score of 4,019 provides a more modern workload reference. When comparing the two cards directly, the RTX 5060 Ti 8 GB's best scores outstrip the FirePro W4170M by orders of magnitude, but its low legacy DirectX scores suggest compatibility or driver optimization issues in those specific tests. The FirePro W4170M's nearest rivals cluster within 0.7% of its score, while the RTX 5060 Ti 8 GB's nearest rivals — including the AMD FirePro W5130M at 4,904 (0.1% behind) and NVIDIA GeForce GTS 450 at 4,893 (0.2% ahead) — show a similarly tight grouping around 4,900, meaning the two cards' average scores differ by only 133 points despite their architectural chasm.

Specification Differences

The specification table reveals stark contrasts across every measurable field. Process node differs from 28 nm to 5 nm. Transistor count jumps from 950 million to 21,900 million. Die size expands from 77 mm² to 181 mm². Base clock rises from 825 MHz to 2,407 MHz, with boost clocks of 900 MHz versus 2,572 MHz. Memory speed improves from 1000 MHz (4 Gbps effective) to 1750 MHz (28 Gbps effective). Memory capacity quadruples from 2 GB to 8 GB, while memory type shifts from GDDR5 to GDDR7. Bus width remains 128 bit for both, but bandwidth increases from 64.00 GB/s to 448.0 GB/s. Pixel rate jumps from 7.200 GPixel/s to 123.5 GPixel/s, texture rate from 21.60 GTexel/s to 370.4 GTexel/s, and FP32 from 691.2 GFLOPS to 23.70 TFLOPS. The RTX 5060 Ti 8 GB lists a TDP of 180 W with a suggested PSU of 450 W and a 1x 8-pin power connector, while the FirePro W4170M has no TDP listed and uses an MXM Module slot with no power connectors. Bus interface advances from PCIe 3.0 x8 to PCIe 5.0 x8. Display outputs change from "Portable Device Dependent" to 1x HDMI 2.1b and 3x DisplayPort 2.1b. Physical dimensions appear only for the RTX 5060 Ti 8 GB: 241 mm length, 111 mm height, 40 mm width, dual-slot. Release dates span from 2015-04-22 to 2025-04-15. The RTX 5060 Ti 8 GB has a launch MSRP of 379 USD.

FAQ

Q: Which GPU has higher raw compute performance?

A: The RTX 5060 Ti 8 GB delivers 23.70 TFLOPS FP32 versus the FirePro W4170M's 691.2 GFLOPS, a 34-fold difference in favor of the newer card.

Q: Why does the RTX 5060 Ti 8 GB have a lower percentile ranking than its specs suggest?

A: The RTX 5060 Ti 8 GB sits at the 29th percentile because its Passmark DirectX scores are notably low — 228 for DX9, 142 for DX10, 220 for DX11, and 82 for DX12 — which lowers its average benchmark score to 4,901 despite high G3D and compute scores.

Q: Can the FirePro W4170M support modern ray tracing workloads?

A: No. The FirePro W4170M has no ray tracing cores listed, while the RTX 5060 Ti 8 GB includes 36 RT cores and 144 tensor cores for such tasks.

Q: How do memory bandwidth figures compare between the two?

A: The RTX 5060 Ti 8 GB offers 448.0 GB/s bandwidth with 8 GB of GDDR7, while the FirePro W4170M provides 64.00 GB/s with 2 GB of GDDR5, a 7-fold bandwidth advantage for the newer GPU.

Q: Are both cards still in production?

A: The FirePro W4170M is marked end-of-life with a 2015 release date, while the RTX 5060 Ti 8 GB is active, released in 2025.

Q: Which card has better API support for current games?

A: The RTX 5060 Ti 8 GB supports DirectX 12 Ultimate (12_2) and Vulkan 1.4, whereas the FirePro W4170M is limited to DirectX 12 (11_1) and Vulkan 1.2.170.

Where Each One Wins

The RTX 5060 Ti 8 GB wins decisively in every modern performance category. Its 23.70 TFLOPS FP32 and 23.70 TFLOPS FP16 (1:1) make it suitable for compute-heavy tasks like machine learning inference or scientific simulation, where the FirePro's 691.2 GFLOPS FP32 and absent FP16 support cannot compete. The 448.0 GB/s memory bandwidth and 8 GB capacity handle large textures and datasets, while the 36 RT cores enable real-time ray tracing in supported applications. The 123.5 GPixel/s pixel rate and 370.4 GTexel/s texture rate support high-resolution rendering at modern display refresh rates. Its PCIe 5.0 x8 interface and display outputs for HDMI 2.1b and DisplayPort 2.1b align with current monitor and connectivity standards. The FirePro W4170M wins only in scenarios defined by legacy constraints: MXM module form factor for older laptops, no external power requirement, and a 2015-era GCN 1.0 driver ecosystem that may be required for proprietary workstation software. Its 7.200 GPixel/s pixel rate and 21.60 GTexel/s texture rate are sufficient for 2D desktop workloads or undemanding 3D applications from its era. For users maintaining systems built around the FirePro Mobile generation, the W4170M's 64.00 GB/s bandwidth and 2 GB memory remain adequate for basic display output, but the data offers no scenario where it outperforms the RTX 5060 Ti 8 GB in raw speed, feature support, or memory capacity.

DETAILED SPECIFICATIONS

SPECIFICATION
FirePro W4170M
RTX 5060 Ti 8 GB
Core Specs
Shading Units
384
4,608 +1100.0%
Shaders
384
4,608 +1100.0%
TMUs
24
144 +500.0%
ROPs
8
48 +500.0%
Compute Units
6
—
SM Count
—
36
Clocks
Base Clock
825 MHz
2407 MHz
Boost Clock
900 MHz
2572 MHz
Memory Clock
1000 MHz 4 Gbps effective
1750 MHz 28 Gbps effective
Memory
Memory Size
2 GB
8 GB
VRAM (MB)
2,048
8,192 +300.0%
Memory Type
GDDR5
GDDR7
Memory Bus
128 bit
128 bit
Bandwidth
64.00 GB/s
448.0 GB/s
Cache
L1 Cache
16 KB (per CU)
128 KB (per SM)
L2 Cache
256 KB
32 MB
Performance
Pixel Rate
7.200 GPixel/s
123.5 GPixel/s
Texture Rate
21.60 GTexel/s
370.4 GTexel/s
FP32 (TFLOPS)
691.2 GFLOPS
23.70 TFLOPS
FP64 (TFLOPS)
43.20 GFLOPS (1:16)
370.4 GFLOPS (1:64)
FP16 (TFLOPS)
—
23.70 TFLOPS (1:1)
AI/RT
RT Cores
—
36
Tensor Cores
—
144
Power
TDP
—
180 W
TDP (W)
—
180
Suggested PSU
—
450 W
Power Connectors
None
1x 8-pin
Architecture
Architecture
GCN 1.0
Blackwell 2.0
GPU Name
Opal
GB206
Generation
FirePro Mobile (Wx100M)
GeForce 50
Process Size
28 nm
5 nm
Transistors
950 million
21,900 million
Die Size
77 mm²
181 mm²
Foundry
TSMC
TSMC
Density
12.3M / mm²
121.0M / mm²
API Support
DirectX
12 (11_1)
12 Ultimate (12_2)
OpenGL
4.6
4.6
Vulkan
1.2.170
1.4
OpenCL
2.1 (1.2)
3.0
CUDA
—
12.0
Shader Model
6.5 (5.1)
6.9
Physical
Slot Width
MXM Module
Dual-slot
Length
—
241 mm 9.5 inches
Height
—
111 mm 4.4 inches
Outputs
Portable Device Dependent
1x HDMI 2.1b3x DisplayPort 2.1b
Bus Interface
PCIe 3.0 x8
PCIe 5.0 x8
Other
Launch Price
—
379 USD
Production
End-of-life
Active
Predecessor
FirePro Mobility
GeForce 40
Successor
Radeon Pro Mobile
GeForce 60
View FirePro W4170M Details View GeForce RTX 5060 Ti 8 GB Details