AMD FirePro M4150 vs AMD Radeon RX 9060 XT 8 GB Comparison

AMD
RADEON

AMD FirePro M4150

CORE STATE Opal
VRAM 1024 MB
CLOCK SPEED —
TDP —
BUS WIDTH 128 bit
ARCHITECTURE GCN 1.0
nm
PROCESS 28 nm
LAUNCH DATE 2013
VS
AMD
RADEON

Radeon RX 9060 XT 8 GB

CORE STATE Navi 44
VRAM 8 GB
CLOCK SPEED 3130 MHz
TDP 150 W
BUS WIDTH 128 bit
ARCHITECTURE RDNA 4.0
nm
PROCESS 4 nm
LAUNCH DATE 2025

PERFORMANCE BENCHMARKS

geekbench_opencl
4,013
N/A
3dmark_3dmark_steel_nomad_dx12
N/A
4,093

Analysis: AMD FirePro M4150 vs AMD Radeon RX 9060 XT 8 GB

Head-to-Head Benchmarks

The benchmark comparison between the AMD Radeon RX 9060 XT 8 GB and the AMD FirePro M4150 is not a direct head-to-head contest, as the data shows no shared test results between the two. The RX 9060 XT's only recorded benchmark is a 3DMark Steel Nomad DX12 score of 4093, while the FirePro M4150's only recorded benchmark is a Geekbench OpenCL score of 4013. These are different workloads, so a raw score comparison would be misleading. Instead, the data reveals how each card positions itself against its own nearest rivals, which tells a sharper story.

The RX 9060 XT lands at the 24th percentile among all GPUs, with an average benchmark score of 4093. Its closest rival, the Intel HD Graphics 630, scores 4075, meaning the RX 9060 XT is just 0.4% ahead. That is a razor-thin margin, effectively a tie. Against the NVIDIA Quadro K2100M, which scores 4151, the RX 9060 XT trails by 1.4%. Against the NVIDIA GeForce GT 755M (4033), it leads by 1.5%, and against the AMD Radeon R5 M330 (4170), it trails by 1.8%. These deltas are all within a narrow band, suggesting the RX 9060 XT's measured score places it in a cluster of older and lower-tier parts in this particular test, despite its modern architecture.

The FirePro M4150 also sits at the 24th percentile, with an average benchmark score of 4013. Its nearest rival, the NVIDIA GeForce GT 755M, scores 4033, putting the FirePro 0.5% behind. Against the AMD Radeon HD 6850 X2 (3977), it leads by 0.9%. The NVIDIA Quadro K2000 scores 3964, placing it 1.2% behind the FirePro, and the NVIDIA GeForce 830M scores 3957, a 1.4% deficit. So the FirePro M4150's performance is similarly clustered, with no dominant win or loss against its immediate competition.

The key takeaway from the head-to-head data is that neither card demonstrates a decisive performance advantage in its respective benchmark. The RX 9060 XT shows a slight positive delta against two rivals and a slight negative delta against two others, with the largest gap being 1.8%. The FirePro M4150 shows a positive delta against three rivals and a negative delta against one, but the largest gap there is 1.4%. Both cards are effectively mid-pack performers in their own test environments, with no clear statistical separator between them and their nearest neighbors.

The Verdict

Based strictly on the data, the AMD Radeon RX 9060 XT 8 GB is the more capable product in absolute terms, but the margin is not what the architecture gap would suggest. The RX 9060 XT produces a score of 4093 in 3DMark Steel Nomad DX12, while the FirePro M4150 produces 4013 in Geekbench OpenCL. These are different benchmarks, so a direct numerical comparison is not valid. However, the percentile placement tells a consistent story: both cards sit at the 24th percentile, meaning neither is a top-tier performer in the broader GPU landscape.

For a user prioritizing modern gaming features and raw throughput, the RX 9060 XT is the clear choice. Its 2048 shading units, 128 texture mapping units, 64 raster operation pipelines, and 32 ray tracing cores dwarf the FirePro's 384 shading units, 24 TMUs, and 8 ROPs. The RX 9060 XT also delivers 25.64 TFLOPS of FP32 compute, versus the FirePro's 549.1 GFLOPS — a massive 46.7x difference in raw floating-point throughput. This is not a close contest in terms of hardware capability.

For a user with legacy mobile workstation needs, the FirePro M4150 has its place. It is an end-of-life MXM module from 2013, built on GCN 1.0 architecture, and its 1024 MB of GDDR5 memory is minimal by modern standards. But its Geekbench OpenCL score of 4013 is respectable for its era, and it supports DirectX 12 (11_1), OpenGL 4.6, and Vulkan 1.2.170. The RX 9060 XT supports DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4, which is a newer feature set.

The data indicates that the RX 9060 XT is for anyone who needs current-generation performance, ray tracing capability, and high-bandwidth memory. The FirePro M4150 is for those maintaining older mobile workstations where the MXM form factor and legacy driver support are the primary considerations. The RX 9060 XT is an active product with a launch MSRP of 299 USD; the FirePro is end-of-life with no listed MSRP. If the choice is between the two, the RX 9060 XT wins on every measurable hardware specification, even if the single benchmark scores are not directly comparable.

Architecture Differences

The architectural gap between these two GPUs is generational. The AMD Radeon RX 9060 XT 8 GB is built on the RDNA 4.0 architecture, using the Navi 44 chip under the codename Strix Point. It belongs to the Navi IV (RX 9000) generation, fabricated on a 4 nm process at TSMC. The FirePro M4150 uses the GCN 1.0 architecture with the Opal chip, belonging to the FirePro Mobile (Mx100) generation, fabricated on a 28 nm process, also at TSMC. The process node difference alone — 4 nm versus 28 nm — represents a massive leap in transistor density.

The RX 9060 XT packs 29,700 million transistors on a 199 mm² die, yielding a transistor density of 149.2 million per square millimeter. The FirePro M4150 has 950 million transistors on a 77 mm² die, for a density of 12.3 million per square millimeter. That is a 12.1x density advantage for the RX 9060 XT. The RX 9060 XT's predecessor is Navi III, while the FirePro's predecessor is FirePro Mobility and its successor is Radeon Pro Mobile.

Feature support diverges sharply. The RX 9060 XT includes 32 dedicated ray tracing cores, a feature the FirePro M4150 lacks entirely. The RX 9060 XT also supports DirectX 12 Ultimate (12_2), whereas the FirePro supports DirectX 12 (11_1) — a lower feature level. Vulkan support is also newer on the RX 9060 XT (1.4 versus 1.2.170). Both cards support OpenGL 4.6, which is a point of parity.

The memory architecture reflects the generational divide. The RX 9060 XT uses GDDR6 memory with an effective data rate of 20.1 Gbps, while the FirePro uses GDDR5 at 4 Gbps effective. Both use a 128-bit memory bus, but the RX 9060 XT's bandwidth of 322.3 GB/s is roughly 5x the FirePro's 64.00 GB/s. The RX 9060 XT also has 8 GB of memory versus the FirePro's 1024 MB (1 GB), an 8x capacity difference.

Specification Differences

The two cards differ across nearly every specification field. The RX 9060 XT has a base clock of 1700 MHz, a boost clock of 3130 MHz, and a game clock of 2530 MHz. The FirePro M4150 lists no base, boost, or game clocks — only a memory clock of 1000 MHz (4 Gbps effective). The RX 9060 XT's memory clock is 2518 MHz (20.1 Gbps effective). This means the RX 9060 XT operates at significantly higher frequencies across the board.

Shading units: 2048 on the RX 9060 XT versus 384 on the FirePro. Texture mapping units: 128 versus 24. Raster operation pipelines: 64 versus 8. The RX 9060 XT has 32 ray tracing cores; the FirePro has none. Pixel rate is 200.3 GPixel/s on the RX 9060 XT versus 5.720 GPixel/s on the FirePro. Texture rate is 400.6 GTexel/s versus 17.16 GTexel/s. FP32 compute is 25.64 TFLOPS versus 549.1 GFLOPS. The RX 9060 XT also lists FP16 at 25.64 TFLOPS (1:1), while the FirePro lists no FP16 figure.

Power and physical specifications differ as well. The RX 9060 XT has a TDP of 150 W, a dual-slot cooler, a single 8-pin power connector, and a recommended 450 W PSU. The FirePro M4150 is an MXM module with no listed TDP, no power connector data, and no PSU recommendation. The RX 9060 XT uses a PCIe 5.0 x16 interface, while the FirePro uses PCIe 3.0 x8. Display outputs are 1x HDMI 2.1b and 2x DisplayPort 2.1a on the RX 9060 XT, versus "Portable Device Dependent" on the FirePro.

Production status and release timing also separate them. The RX 9060 XT is active, released 2025-06-03, with a launch MSRP of 299 USD. The FirePro M4150 is end-of-life, released 2013-10-15, with no launch MSRP. The RX 9060 XT has no successor listed; the FirePro's successor is Radeon Pro Mobile.

FAQ

Q: Which GPU has more raw compute power?

A: The AMD Radeon RX 9060 XT 8 GB delivers 25.64 TFLOPS of FP32 compute, while the AMD FirePro M4150 delivers 549.1 GFLOPS. The RX 9060 XT is roughly 46.7x more powerful in raw floating-point throughput.

Q: Do both cards support ray tracing?

A: No. The RX 9060 XT has 32 dedicated ray tracing cores. The FirePro M4150 lists no ray tracing cores, so it does not support hardware ray tracing.

Q: What is the memory capacity difference?

A: The RX 9060 XT has 8 GB of GDDR6 memory, while the FirePro M4150 has 1024 MB of GDDR5 memory. The RX 9060 XT also has a bandwidth of 322.3 GB/s versus 64.00 GB/s on the FirePro.

Q: How do their benchmark scores compare to their nearest rivals?

A: The RX 9060 XT scores 4093 in 3DMark Steel Nomad DX12, sitting 0.4% above the Intel HD Graphics 630 and 1.5% above the NVIDIA GeForce GT 755M, but 1.4% below the NVIDIA Quadro K2100M and 1.8% below the AMD Radeon R5 M330. The FirePro M4150 scores 4013 in Geekbench OpenCL, sitting 0.9% above the AMD Radeon HD 6850 X2, 1.2% above the NVIDIA Quadro K2000, and 1.4% above the NVIDIA GeForce 830M, but 0.5% below the NVIDIA GeForce GT 755M.

Q: Which card is currently in production?

A: The RX 9060 XT has an active production status and was released on 2025-06-03. The FirePro M4150 is end-of-life and was released on 2013-10-15.

Q: What is the process node for each card?

A: The RX 9060 XT is fabricated on a 4 nm process at TSMC. The FirePro M4150 is fabricated on a 28 nm process, also at TSMC. The RX 9060 XT's die contains 29,700 million transistors on 199 mm², while the FirePro has 950 million transistors on 77 mm².

DETAILED SPECIFICATIONS

SPECIFICATION
FirePro M4150
RX 9060 XT 8 GB
Core Specs
Shading Units
384
2,048 +433.3%
Shaders
384
2,048 +433.3%
TMUs
24
128 +433.3%
ROPs
8
64 +700.0%
Compute Units
6
32 +433.3%
Clocks
Base Clock
—
1700 MHz
Boost Clock
—
3130 MHz
GPU Clock
715 MHz
—
Game Clock
—
2530 MHz
Memory Clock
1000 MHz 4 Gbps effective
2518 MHz 20.1 Gbps effective
Memory
Memory Size
1024 MB
8 GB
VRAM (MB)
1,024
8,192 +700.0%
Memory Type
GDDR5
GDDR6
Memory Bus
128 bit
128 bit
Bandwidth
64.00 GB/s
322.3 GB/s
Cache
L1 Cache
16 KB (per CU)
—
L2 Cache
256 KB
4 MB
L3 Cache
—
32 MB
L0 Cache
—
32 KB per WGP
Performance
Pixel Rate
5.720 GPixel/s
200.3 GPixel/s
Texture Rate
17.16 GTexel/s
400.6 GTexel/s
FP32 (TFLOPS)
549.1 GFLOPS
25.64 TFLOPS
FP64 (TFLOPS)
34.32 GFLOPS (1:16)
801.3 GFLOPS (1:32)
FP16 (TFLOPS)
—
25.64 TFLOPS (1:1)
AI/RT
RT Cores
—
32
Matrix Cores
—
64
Power
TDP
—
150 W
TDP (W)
—
150
Suggested PSU
—
450 W
Power Connectors
—
1x 8-pin
Architecture
Architecture
GCN 1.0
RDNA 4.0
GPU Name
Opal
Navi 44
Codename
—
Strix Point
Generation
FirePro Mobile (Mx100)
Navi IV (RX 9000)
Process Size
28 nm
4 nm
Transistors
950 million
29,700 million
Die Size
77 mm²
199 mm²
Foundry
TSMC
TSMC
Density
12.3M / mm²
149.2M / mm²
API Support
DirectX
12 (11_1)
12 Ultimate (12_2)
OpenGL
4.6
4.6
Vulkan
1.2.170
1.4
OpenCL
2.1 (1.2)
2.2
Shader Model
6.5 (5.1)
6.9
Physical
Slot Width
MXM Module
Dual-slot
Outputs
Portable Device Dependent
1x HDMI 2.1b2x DisplayPort 2.1a
Bus Interface
PCIe 3.0 x8
PCIe 5.0 x16
Other
Launch Price
—
299 USD
Production
End-of-life
Active
Predecessor
FirePro Mobility
Navi III
Successor
Radeon Pro Mobile
—
View FirePro M4150 Details View Radeon RX 9060 XT 8 GB Details