Archeage

The AMD Ryzen 7 5700 and Intel Arc B570 pairing produces a playable but constrained experience in Archeage, with frame rates that scale predictably across resolutions and settings. The data shows a system that is clearly capable of smooth 1080p play, but one that struggles to maintain acceptable performance at 4K, particularly when the preset is pushed beyond Medium. This analysis examines the measured FPS rows to determine where the bottleneck lies and which settings offer the best balance of visual quality and fluidity.

Resolution Scaling

The measured frame rates reveal a steep performance cliff as resolution increases. At 1080p with Low settings, the combo achieves an average of 110 FPS, which drops by roughly a third to 74 FPS at 1440p, and then nearly halves again to 42 FPS at 4K. This pattern of diminishing returns is typical of a system where the GPU becomes progressively more stressed at higher pixel counts. The difference between 1080p and 1440p Low settings is a 36 FPS drop, while the step from 1440p to 4K Low is a 32 FPS drop, indicating that the GPU's rendering throughput is the primary limiter at these higher resolutions.

The scaling behavior changes when the preset is set to High. At 1080p High, the average FPS is 66, which falls to 45 at 1440p and then to 26 at 4K. The percentage drop from 1080p to 1440p is about 32%, and from 1440p to 4K it is about 42%. This steeper decline at High settings suggests that the additional graphical load, likely from more complex shading and texture work, amplifies the GPU's workload disproportionately at 4K. The 4K High result of 26 FPS is below the threshold for comfortable play, making it a poor choice for this resolution.

Ultra settings are essentially unplayable at higher resolutions. The measured average at 4K Ultra is just 17 FPS, and at 1440p Ultra it only reaches 31 FPS. Even at 1080p Ultra, the average of 45 FPS is marginal. The data indicates that the Ultra preset is not viable for this hardware combination at any resolution above 1080p, and even at 1080p it provides a suboptimal experience compared to lower presets. The jump from 1080p Ultra to 1440p Ultra is a 14 FPS loss, while the jump from 1440p Ultra to 4K Ultra is another 14 FPS loss, showing a consistent and severe performance penalty.

The scaling pattern suggests that the Intel Arc B570 is the limiting component at 4K and 1440p. The CPU's performance headroom, evidenced by its strong multi-threaded scores, is not sufficient to overcome the GPU's inability to fill frames at high pixel counts. The FPS drops are consistent with a GPU-bound scenario, where the render resolution directly dictates the frame rate. The 1080p results, particularly the 110 FPS Low and 98 FPS Medium averages, show that the combo has enough power to deliver high frame rates when the pixel count is manageable, further confirming the GPU as the bottleneck at higher resolutions.

How This Combo Ranks

In the context of the benchmark database, this combination of AMD Ryzen 7 5700 and Intel Arc B570 ranks 2222 out of 2761 tested combos for Archeage. This places it in the lower half of all systems tested, indicating that while it is not a bottom-tier performer, it is far from the top of the pack. The rank is a holistic measure of the system's ability to run this specific game, and it reflects the GPU's limitations at demanding settings.

Given that the GPU's average benchmark score places it in the 65th percentile of all GPUs, and the CPU is in the 78th percentile, the combo's rank in Archeage is lower than what either component's individual percentile would suggest. This discrepancy implies that Archeage is particularly demanding on the GPU, and the Arc B570's strengths in synthetic benchmarks do not fully translate to this game's specific rendering requirements. The combo's performance is more aligned with the GPU's capabilities than the CPU's, reinforcing the notion that the GPU is the constraining factor.

The nearest rival GPUs to the Arc B570, based on average benchmark scores, include the NVIDIA GeForce RTX 3070 Mobile and the Intel Arc A750, with deltaPct values of 0.1% and -0.1% respectively. This means the Arc B570's overall compute performance is essentially on par with those cards. However, in Archeage, the measured FPS at 4K High (26 FPS) and 1440p High (45 FPS) show that the card's real-world gaming performance is heavily dependent on the workload. The combo rank of 2222 suggests that many other pairings, likely with more powerful GPUs, achieve higher frame rates in this MMORPG.

The rank also highlights the importance of pairing components appropriately. While the Ryzen 7 5700 is a capable CPU, its performance is wasted at 4K Ultra where the GPU can only produce 17 FPS. The system's overall ranking would be significantly improved by using a more powerful GPU, but as configured, it sits in a mid-to-low tier for Archeage. The data shows that this is a 1080p-oriented system for this title, and its rank reflects that limitation.

CPU Role

The AMD Ryzen 7 5700 is an 8-core, 16-thread processor based on the Zen 3 architecture, with a base clock of 3.70 GHz and a boost clock of 4.60 GHz. Its benchmark results are respectable, with a Cinebench R23 multi-core score of 20655 and a single-core score of 2916. The CPU's percentile rank of 78 indicates it is better than the majority of processors in the database, and its average benchmark score of 25517 puts it in the same league as the Intel Xeon D-2752TER and AMD Ryzen 5 7640U, which show deltaPct values of -0.1% and 0.1% respectively.

In Archeage, the CPU's role is to feed the GPU with draw calls and game logic. The data suggests that at 1080p, the CPU is not the primary bottleneck. The 110 FPS average at Low settings and 98 FPS at Medium settings indicate that the CPU can handle the game's single-threaded and multi-threaded demands at these resolutions. The 16 threads available on the Ryzen 7 5700 are more than sufficient for a game released in 2014, and the high multi-core scores suggest it can manage the background tasks and MMO player interactions without issue.

However, the CPU's potential is not fully utilized at higher resolutions. The FPS drops from 1080p to 4K are so severe that the GPU is clearly the limiting factor, meaning the CPU is likely waiting for the GPU to complete its work. This is a classic GPU-bound scenario. The CPU's strong single-thread performance, evidenced by its Cinebench R23 single-core score of 2916, is not enough to compensate for the GPU's inability to render at 4K. The bottleneck shifts entirely to the GPU, rendering the CPU's extra headroom irrelevant.

The fact that the CPU's benchmark rivals, such as the AMD Ryzen 5 7640U, have similar average scores, suggests that the Ryzen 7 5700 is not an outlier in terms of compute power. Its performance in Archeage is therefore governed more by the GPU it is paired with. For players with this CPU, the path to higher frame rates lies in lowering the resolution or graphics settings, as the processor has ample power to deliver better performance if the GPU can keep up. The data supports the conclusion that the CPU is a solid foundation for a gaming PC, but its capabilities are capped by the Arc B570 in this specific configuration.

FAQ

Q: What is the best resolution for this combo in Archeage?

A: The measured data shows that 1920x1080 is the most viable resolution. At 1080p, the combo achieves playable frame rates across all settings, with a peak of 110 FPS at Low and a minimum of 45 FPS at Ultra. At 1440p and 4K, frame rates drop significantly, making the experience less smooth.

Q: Is the Intel Arc B570 or the AMD Ryzen 7 5700 the bottleneck?

A: The benchmark results indicate the GPU is the primary bottleneck at higher resolutions. The FPS drops dramatically from 1080p to 4K, which is a classic sign of GPU limitation. The CPU's strong benchmark scores, such as a Cinebench R23 multi-core score of 20655, show it has enough power, but the GPU cannot keep up with the increased pixel count.

Q: Can this system run Archeage at 4K?

A: Technically, yes, but not at a playable frame rate. The measured average FPS at 4K is 42 with Low settings, 38 with Medium, 26 with High, and 17 with Ultra. These results are all below the generally accepted threshold for smooth gameplay, so 4K is not recommended for this configuration.

Q: How does the Arc B570 compare to its nearest rivals in terms of performance?

A: The GPU's average benchmark score of 20556 is nearly identical to the NVIDIA GeForce RTX 3070 Mobile (deltaPct of 0.1%) and the Intel Arc A750 (deltaPct of -0.1%). This means its overall compute performance is on par with those cards, but its real-world performance in Archeage is limited by the game's specific demands.

Q: What is the highest settings preset that maintains a good frame rate at 1440p?

A: At 1440p, the Medium preset is the best option, with an average FPS of 66 and a minimum of 56. The Low preset offers a higher average of 74 FPS, but Medium provides a better balance of visual quality and performance. High and Ultra presets at 1440p are not recommended due to their lower average frame rates.

Q: Is the CPU's performance sufficient for this game?

A: Yes, the Ryzen 7 5700 is more than capable for Archeage. Its 8 cores and 16 threads, combined with a boost clock of 4.60 GHz, provide ample processing power. The benchmark results show it ranks in the 78th percentile of all CPUs, and its performance is not the limiting factor in this system.

GPU Role

The Intel Arc B570 is a 10 GB GDDR6 graphics card based on the Xe2-HPG architecture, with a boost clock of 2500 MHz and a memory bandwidth of 380.0 GB/s. Its benchmark scores are modest, with a Passmark G3D score of 14195 and a 3DMark Steel Nomad DX12 score of 2649. The GPU's percentile rank of 65 indicates it is an average performer, sitting below the top tier of graphics cards.

In Archeage, the GPU's role is dominant in determining the final frame rate. The data shows a clear correlation between resolution and FPS, which is the primary indicator of GPU load. The card's 10 GB of VRAM is not a limiting factor at the tested settings, as the game is from 2014 and likely does not require that much memory. The bottleneck is the GPU's raw compute power, which is insufficient to render at 4K and high settings effectively.

The GPU's performance is characterized by a steep drop-off as resolution increases. For example, the average FPS falls from 66 at 1080p High to 45 at 1440p High, and then to 26 at 4K High. This consistent decline shows that the card is being pushed to its limits. The 160-bit memory bus and 380.0 GB/s bandwidth are likely contributing factors, as higher resolutions require more memory throughput, which the card cannot provide.

The GPU's rival comparison shows it is on par with the Intel Arc A750 and NVIDIA GeForce RTX 3070 Mobile in terms of average benchmark scores. However, in Archeage, the card's performance suggests it is better suited for 1080p gaming. The measured 110 FPS at 1080p Low shows the card's potential when the load is manageable, but its inability to maintain high frame rates at 4K is a clear limitation. For this game, the Arc B570 is a competent 1080p card, but it lacks the horsepower for higher resolutions.

Settings Recommendations

Based on the measured FPS rows, the optimal settings for this combo depend on the user's target resolution and preference for frame rate over visual fidelity. At 1920x1080, the Medium preset is the best choice for a balanced experience, delivering an average of 98 FPS with a minimum of 83 FPS. This provides a smooth and responsive feel while still offering a reasonable level of graphical detail. For players who prioritize maximum performance, the Low preset at 1080p offers the highest average of 110 FPS, which is ideal for competitive play. The High preset at 1080p is also viable with an average of 66 FPS, but the drop from Medium is significant, making Medium the better value.

At 2560x1440, the Medium preset is the only recommended option. It achieves an average of 66 FPS with a minimum of 56 FPS, which is playable, albeit with some dips. The Low preset offers a higher average of 74 FPS, but the visual quality is noticeably reduced. The High preset at 1440p has an average of 45 FPS, which is borderline, and Ultra is too demanding at 31 FPS. Users at 1440p should stick to Medium to maintain a playable frame rate.

The 4K resolution is not recommended for this configuration. Even the Low preset only produces an average of 42 FPS, which is not smooth enough for most players. The Medium preset at 4K has an average of 38 FPS, and High and Ultra are unplayable at 26 and 17 FPS respectively. The data strongly suggests that 4K is beyond the capabilities of this system for Archeage, and users should avoid it.

In summary, the best experience is achieved at 1080p with the Medium preset, which offers an average of 98 FPS and a minimum of 83 FPS. This provides a fluid and visually acceptable experience. At 1440p, Medium is the only sensible choice, albeit with a lower frame rate. For users who want to push to 4K, significant compromises to visual quality are required, and the resulting frame rates are still not ideal. The combination of the Ryzen 7 5700 and Arc B570 is best utilized as a 1080p gaming setup for Archeage.