Archeage

The AMD Ryzen 7 5700X3D paired with the Intel Arc B570 produces a combination that sits near the lower end of the performance spectrum for Archeage. The data places this specific pairing at rank 2222 out of 2761 tested combos, placing it in the bottom quintile of all tested hardware configurations. This ranking is driven by the GPU's mid-tier position and the CPU's modest single-thread performance relative to the game's demands.

In practical terms, this combo is positioned to handle the game at 1080p with reasonable fluidity, but it struggles to maintain playable frame rates at higher resolutions. The Arc B570's 65th percentile standing among all GPUs, combined with the Ryzen 7 5700X3D's 77th percentile among all CPUs, creates a system that is more capable than the bottom tier but still far from the top. The measured frame rates reflect this, with the combo achieving playable averages only at 1080p and at lower settings at 1440p.

How This Combo Ranks

The combo rank of 2222 out of 2761 tested configurations places this system in the 19th percentile of all tested hardware pairings for Archeage. This is a low standing, indicating that the vast majority of tested systems deliver higher average frame rates. The rank is influenced by both components, but the GPU's performance ceiling is the dominant limiting factor in this specific title.

Benchmark results indicate that the CPU is not the primary bottleneck at lower resolutions. The Ryzen 7 5700X3D holds its own against its nearest rivals, with an average benchmark score of 24709. This places it just 0.1% behind the AMD Ryzen 5 7600X3D and 0.5% behind the AMD Ryzen 9 5900HX. It is also slightly ahead of the Intel Core i5-12450HX by 0.5% and the Intel Core i5-11600 by 0.6%. These deltas are negligible, meaning the CPU's raw processing power is competitive with its direct peers.

The GPU, however, is where the system loses ground. The Intel Arc B570's average benchmark score of 20556 puts it 0.1% ahead of the NVIDIA GeForce RTX 3070 Mobile and 0.4% ahead of the NVIDIA Quadro M4000M, while trailing the Intel Arc A750 by 0.1% and the AMD Radeon R9 M390X by 0.5%. This tight grouping around the 20500 score mark shows the Arc B570 is a mid-pack performer, and in Archeage, that translates to the low combo rank observed.

GPU Role

The Intel Arc B570 is the primary constraint on this system's Archeage performance. Its 10 GB of GDDR6 memory on a 160-bit bus provides 380.0 GB/s of bandwidth, which is adequate for this 2014 MMORPG. The GPU's base and boost clocks are both fixed at 2500 MHz, a uniform clock speed that simplifies performance prediction. With 2304 shading units, 144 texture mapping units, and 80 raster operation pipelines, the card is architecturally capable of rendering the game's environments.

The GPU's memory configuration is sufficient for the game's textures at 1080p and 1440p, but the frame rates suggest that raw compute throughput is the limiting factor. The card's FP32 performance of 11.52 TFLOPS is the theoretical ceiling for its shading work, and the measured results indicate that this is not enough to push high frame rates at higher resolutions. The pixel rate of 200.0 GPixel/s and texture rate of 360.0 GTexel/s are the theoretical limits for fill-rate-bound scenes, and Archeage's open-world environments can be demanding in this regard.

The Arc B570's position relative to its rivals confirms its mid-tier status. It is 0.1% faster than the RTX 3070 Mobile, which is a mobile part, and 0.4% faster than the Quadro M4000M, a workstation GPU. The fact that it is 0.1% slower than the Intel Arc A750, its predecessor in the Arc lineup, shows that the B570 is not a generational leap in raw performance. For Archeage, this means the GPU will deliver similar results to these peers, which are all on the lower half of the performance curve.

CPU Role

The AMD Ryzen 7 5700X3D provides a solid foundation for this system, but its role in Archeage is secondary to the GPU. The CPU features 8 cores and 16 threads based on the Zen 3 architecture, with a base clock of 3.00 GHz and a boost clock of 4.10 GHz. The large 96 MB shared L3 cache is a key asset, as it helps with the game's frequent data access patterns. The 7 nm process node from TSMC and 8,850 million transistors on a 74 mm² die indicate a mature design.

In CPU-bound scenarios, the 5700X3D shows competitive performance. Its 3DMark single-thread score of 804 and 2-thread score of 1575 are modest, but the 8-thread score of 5357 and max-thread score of 6755 show scaling. The Cinebench R23 multicore score of 22366 is respectable, while the single-core score of 3157 is adequate for the game's primary thread. The Geekbench multicore score of 11086 and single-core score of 1849 reinforce the CPU's balanced profile.

The CPU's nearest rivals show it is well-matched. The 0.1% deficit to the Ryzen 5 7600X3D is negligible, and the 0.5% gap to the Ryzen 9 5900HX is also minimal. The CPU is actually 0.5% ahead of the Core i5-12450HX and 0.6% ahead of the Core i5-11600. These results suggest the CPU is not holding the system back in a meaningful way. For Archeage, which is not heavily multithreaded, the CPU's single-thread performance is sufficient to feed the GPU at 1080p, but the GPU's limitations become apparent as resolution increases.

Measured FPS Breakdown

The measured frame rates reveal a clear pattern of performance degradation as resolution increases. At 1920x1080, the combo delivers playable results across all settings. The Low preset achieves an average of 110 FPS, Medium drops to 98 FPS with a minimum of 83 and maximum of 112, High averages 66 FPS, and Ultra averages 45 FPS. These numbers show a smooth scaling curve where each step up in settings costs roughly 20-30% performance.

At 2560x1440, the frame rates drop significantly. Low averages 74 FPS, Medium averages 66 FPS with a range of 56 to 76, High averages 45 FPS, and Ultra averages 31 FPS. The drop from 1080p to 1440p at the same settings is substantial, indicating the GPU is becoming the bottleneck. The High preset at 1440p matches the Ultra preset at 1080p at 45 FPS, showing that resolution scaling is costing roughly two settings levels.

At 3840x2160, the system struggles. Low averages 42 FPS, Medium averages 38 FPS with a range of 32 to 43, High averages 26 FPS, and Ultra averages 17 FPS. These numbers are largely unplayable for an MMORPG, especially the Ultra preset which falls below 20 FPS. The data shows that 4K is not a viable resolution for this combo in Archeage, even at the lowest settings.

Resolution Scaling

The frame rate scaling from 1080p to 4K illustrates the GPU-bound nature of this system. At Low settings, the average FPS drops from 110 at 1080p to 74 at 1440p and 42 at 4K. This represents a 33% drop from 1080p to 1440p and an additional 43% drop from 1440p to 4K. The scaling is roughly proportional to the pixel count increase, which is characteristic of a GPU-limited scenario.

At Medium settings, the averages are 98 at 1080p, 66 at 1440p, and 38 at 4K. The drop from 1080p to 1440p is 33%, and from 1440p to 4K is 42%. These percentages are consistent with the Low settings, confirming that the GPU is the limiting component. At High settings, the averages are 66 at 1080p, 45 at 1440p, and 26 at 4K, with drops of 32% and 42% respectively. The Ultra preset follows the same pattern: 45 at 1080p, 31 at 1440p, and 17 at 4K.

The consistent 30-40% performance drops between resolution steps indicate that the CPU is not a bottleneck at any resolution. If the CPU were limiting, the scaling from 1440p to 4K would flatten out as the GPU becomes more saturated. Instead, the linear scaling suggests the GPU's fill rate and shading throughput are the primary constraints. The CPU's 96 MB L3 cache helps maintain consistent frame delivery, but it cannot compensate for the GPU's limited raw power at higher resolutions.

FAQ

Q: What is the best resolution to play Archeage with this combo?

A: The data shows that 1920x1080 is the only resolution where the system maintains playable frame rates across all settings. At 1080p, the lowest average is 45 FPS at Ultra, which is the minimum for smooth gameplay. At 1440p, the High preset averages 45 FPS, which is borderline, and at 4K, even the Low preset only averages 42 FPS.

Q: How does the CPU compare to its nearest rivals?

A: The Ryzen 7 5700X3D has an average benchmark score of 24709, which is 0.1% behind the Ryzen 5 7600X3D and 0.5% behind the Ryzen 9 5900HX. It is 0.5% ahead of the Intel Core i5-12450HX and 0.6% ahead of the Intel Core i5-11600, showing it is competitive with its peers.

Q: Is the GPU or CPU the limiting factor in Archeage?

A: The benchmark results indicate the GPU is the primary bottleneck. The frame rate scaling from 1080p to 4K is consistent and proportional to pixel count, which is characteristic of a GPU-limited scenario. The CPU's performance is competitive with its rivals, but the GPU's mid-tier standing limits overall performance.

Q: What is the performance difference between the Low and Ultra presets at 1080p?

A: At 1080p, the Low preset averages 110 FPS while the Ultra preset averages 45 FPS. This represents a 65 FPS difference, meaning the Ultra preset delivers only 41% of the Low preset's performance. The Medium preset at 98 FPS and High preset at 66 FPS sit between these extremes.

Q: How does the GPU compare to the Intel Arc A750?

A: The Intel Arc B570 has an average benchmark score of 20556, which is 0.1% lower than the Intel Arc A750's score of 20582. This indicates the B570 is essentially tied with its predecessor in raw performance, with the A750 having a negligible 0.1% advantage.

Q: Can this combo handle Archeage at 4K?

A: The data shows that 4K performance is limited. The Low preset averages 42 FPS, Medium averages 38 FPS, High averages 26 FPS, and Ultra averages 17 FPS. Only the Low and Medium presets approach playable frame rates, and even those are below the 60 FPS target for smooth MMORPG gameplay.

Settings Recommendations

The measured data suggests that the 1920x1080 resolution with the Medium preset offers the best balance of visual quality and performance for this combo. The Medium preset at 1080p averages 98 FPS with a minimum of 83 and maximum of 112, providing a smooth experience with a safety margin above the 60 FPS threshold. The High preset at 66 FPS is also viable, but the 32 FPS drop from Medium to High is significant.

For players who prioritize frame rate over visual fidelity, the Low preset at 1080p delivers 110 FPS average, which is the highest measured result for this combo. This setting would be ideal for competitive play or for maintaining maximum fluidity in crowded areas. The Ultra preset at 45 FPS is the only setting that falls below the 60 FPS target, making it less desirable for consistent gameplay.

At 1440p, the Low preset at 74 FPS is the only option that maintains a comfortable frame rate. The Medium preset at 66 FPS is playable, but the High and Ultra presets at 45 and 31 FPS respectively are too close to the edge of playability. For 4K, the data does not support any preset as a good experience, with the Low preset at 42 FPS being the highest achievable average, which is still below the 60 FPS target. The recommendation is to stay at 1080p for the best experience, using Medium as the default and High as an option for those who prefer better visuals at slightly lower frame rates.