Archeage

Archeage is a 2014 MMORPG that remains sensitive to both CPU and GPU load, and the measured data for the AMD Ryzen 7 5700 + AMD Radeon RX 6600 combo shows a clear pecking order across resolutions and presets. This pairing sits at rank 1426 out of 1727 tested combos in the game, placing it below the median, but the actual frame rates tell a more nuanced story. The CPU, a Zen 3 8-core/16-thread part with a 3.70 GHz base and 4.60 GHz boost clock, is strong enough to avoid being the primary bottleneck at most settings, while the GPU, with its 8 GB GDDR6 memory and 224.0 GB/s bandwidth, dictates the ceiling at higher loads. The data indicates that players should prioritize the Medium preset at 1080p for a smooth experience, as it delivers 102.6 FPS average, a substantial jump over High at 73.5 FPS, and only a modest drop from Low at 116.9 FPS. Pushing to Ultra at 1080p halves the frame rate to 51.9 FPS, which is a steep penalty for marginal visual gains.

Settings Recommendations

The optimal experience for this hardware combination is the Medium preset at 1920x1080. This setting yields an average of 102.6 FPS, which is well above the 60 FPS threshold for comfortable gameplay, while still providing better visual fidelity than Low. The jump from Low to Medium costs roughly 14 FPS (116.9 down to 102.6), which is a reasonable trade for the improved rendering quality. High at 1080p drops to 73.5 FPS, still playable but approaching the point where large-scale MMORPG battles might cause noticeable stutter, especially since the data only shows averages. Ultra at 1080p is not recommended, as the 51.9 FPS average falls below the smoothness standard and represents a 49% decrease from Medium.

At 2560x1440, the Medium preset is again the most balanced choice, producing 68.5 FPS average. This keeps the experience fluid, whereas High at 45.9 FPS and Ultra at 30.6 FPS become increasingly difficult to play, particularly in crowded areas. Low at 1440p offers 76.9 FPS, but the visual downgrade is noticeable. The 3840x2160 resolution is only viable on Low settings, which averages 44.6 FPS; Medium drops to 40.4 FPS, and High falls to 25.3 FPS, making the game feel sluggish. For the best balance of responsiveness and visual quality, the data strongly favors Medium at 1080p, with Medium at 1440p as a viable alternative for users with higher-resolution monitors willing to accept lower frame rates.

GPU Role

The Radeon RX 6600 is the dominant performance limiter in this pairing, particularly at higher resolutions and settings. Its 8 GB of GDDR6 memory on a 128-bit bus provides 224.0 GB/s of bandwidth, which is sufficient for 1080p but becomes strained as pixel count increases. The GPU's boost clock of 2491 MHz and game clock of 2044 MHz allow it to handle the workload, but the measured FPS drops reveal its limits. At 1080p, the GPU can push 116.9 FPS on Low, but this falls to 51.9 FPS on Ultra, a 56% reduction. This scaling shows that the GPU's compute resources, 1792 shading units and 64 ROPs, are quickly saturated by the higher-detail render paths.

The GPU's performance relative to rivals is nearly identical, with its average benchmark score of 25235 sitting within 1% of the AMD Radeon 890M, AMD Radeon RX 580 2048SP, AMD Radeon RX 6700M, and NVIDIA GeForce RTX 3060 Ti. This means the RX 6600 is a mid-pack performer, and the game's demands push it to its limits. The 4K results confirm this: even on Low, the GPU only manages 44.6 FPS, and Ultra produces a slideshow-like 21.2 FPS. The GPU's percentile rank of 69 against all GPUs indicates it is better than average, but Archeage's rendering load, especially with shadows and textures, exposes its 8 GB frame buffer. Players should not expect to run Ultra at any resolution above 1080p without significant frame rate compromises.

CPU Role

The AMD Ryzen 7 5700 provides ample computational headroom for Archeage. With 8 cores and 16 threads based on Zen 3 architecture, it offers a 16 MB L3 cache and a boost clock of 4.60 GHz. Its average benchmark score is 27220, placing it in the 84th percentile of all CPUs, and it edges out the Intel Core i9-9900K by 0.7% and the Intel Core i7-12700H by 0.8%. This processing power ensures that the CPU does not bottleneck the GPU in most scenarios, as evidenced by the FPS scaling. At 1080p, dropping from Medium to Low increases FPS by 14.3 (102.6 to 116.9), which suggests the GPU is still the primary constraint, as the CPU is not fully taxed.

The CPU's single-thread performance, with a 3dmark single-thread score of 901 and a cinebench_r23 single-core score of 2916, is more than adequate for the game's logic and network handling. MMORPGs like Archeage often have a single-thread-heavy main loop, but the 5700's strong per-core performance avoids creating a bottleneck. The multi-thread capabilities, shown in the cinebench_r23 multicore score of 20655, also help with background tasks and asset streaming. The data shows that the CPU is not the limiting factor at any measured resolution or setting; the FPS differences between Low and Medium at 1080p (14.3 FPS) are smaller than the differences between Medium and High (29.1 FPS), indicating the GPU is the constraint at higher presets.

FAQ

Q: What is the best resolution to play Archeage with this hardware?

A: 1920x1080 is the optimal resolution, as it allows for the highest frame rates. At Medium settings, the average FPS is 102.6, which is smooth, while 2560x1440 at Medium drops to 68.5 FPS and 3840x2160 at Low only reaches 44.6 FPS.

Q: Should I use the Ultra preset for better graphics?

A: No, the Ultra preset is not recommended. At 1080p, it delivers only 51.9 FPS, which is a 49% drop from Medium. At 1440p, Ultra falls to 30.6 FPS, and at 4K, it produces a playable-unfriendly 21.2 FPS. The visual improvement does not justify the frame rate loss.

Q: Is the CPU or GPU more important for this game?

A: The GPU is the limiting factor. The Ryzen 7 5700's benchmark scores (27220 average, 84th percentile) are more than sufficient, while the RX 6600's scores (25235 average, 69th percentile) are the constraint. The FPS scaling with settings changes confirms this, as higher presets cause sharper drops.

Q: Can I run Archeage at 4K with this combo?

A: Only on Low settings, which averages 44.6 FPS. Medium drops to 40.4 FPS, and High falls to 25.3 FPS. For a playable experience, stick to 1080p or 1440p.

Q: How does this CPU compare to its closest rivals?

A: The Ryzen 7 5700 scores 27220 on average, which is 0.7% higher than the Intel Core i9-9900K (27043) and 0.8% higher than the Intel Core i7-12700H (27006). It is effectively at parity with the Intel Core i7-1370P and AMD Ryzen AI 5 340.

Q: What is the frame rate difference between Low and High at 1080p?

A: The difference is 43.4 FPS. Low averages 116.9 FPS, while High averages 73.5 FPS. This is a substantial drop, making Medium (102.6 FPS) a better balance.

Resolution Scaling

The FPS drops from 1080p to 4K are severe and reveal a GPU-bound system. At Medium settings, the average FPS falls from 102.6 at 1080p to 68.5 at 1440p, a 33% decrease, and then to 40.4 at 4K, a further 41% decrease from 1440p. This scaling is consistent with a GPU that has a fixed memory bandwidth of 224.0 GB/s and 8 GB of VRAM, which must work harder as pixel count quadruples. At High settings, the drop is even steeper: 73.5 FPS at 1080p to 45.9 FPS at 1440p (a 38% loss) and then to 25.3 FPS at 4K (a 45% loss from 1440p). These figures indicate that the GPU's shading units and ROPs are overwhelmed.

The Low preset shows a more gradual decline, from 116.9 FPS at 1080p to 76.9 FPS at 1440p (34% drop) and 44.6 FPS at 4K (42% drop from 1440p). This suggests that even at the lowest settings, the resolution increase still taxes the GPU heavily, confirming the RX 6600 is the bottleneck. The CPU's role in this scaling is minimal, as its performance does not degrade with resolution. The data shows that the limiting component is the GPU, and players should target 1080p for the best experience, with 1440p only viable on Medium or Low settings.

Measured FPS Breakdown

At 1920x1080, the frame rates are as follows: Low delivers 116.9 FPS average, Medium delivers 102.6 FPS, High delivers 73.5 FPS, and Ultra delivers 51.9 FPS. The gap between Medium and High is 29.1 FPS, which is the largest single-step drop at this resolution, indicating a significant increase in GPU load. Low to Medium shows a 14.3 FPS difference, while High to Ultra shows a 21.6 FPS difference. This pattern suggests that the High preset introduces heavy effects that strain the GPU.

Moving to 2560x1440, the averages are: Low at 76.9 FPS, Medium at 68.5 FPS, High at 45.9 FPS, and Ultra at 30.6 FPS. The drop from Medium to High is 22.6 FPS, and from High to Ultra is 15.3 FPS. At this resolution, even Low settings do not hit the 100 FPS mark, and Ultra becomes nearly unplayable. The 3840x2160 results are: Low at 44.6 FPS, Medium at 40.4 FPS, High at 25.3 FPS, and Ultra at 21.2 FPS. The difference between Low and Medium at 4K is only 4.2 FPS, suggesting that the GPU is so constrained that preset changes have diminishing returns. All measured FPS values show no minimum or maximum data, so averages represent the full picture. For a stable experience, the data recommends 1080p Medium (102.6 FPS) as the primary target, with 1440p Medium (68.5 FPS) as a secondary option for users prioritizing resolution over frame rate.