Archeage

The AMD Ryzen 7 5700 and AMD Radeon RX 7700 XT combination delivers a performance profile in Archeage that is heavily dictated by resolution and visual presets, with the data revealing a clear transition from a CPU-bound scenario at 1080p to a GPU-bound one at 4K. The measured results show a spread from a highly fluid 176.4 FPS at 1080p Low to a demanding 26.8 FPS at 4K Ultra, indicating that users must carefully balance settings to achieve their desired frame rate.

Resolution Scaling

The frame rate drop from 1080p to 4K is substantial and non-linear, indicating that the rendering load scales aggressively with pixel count. At the High preset, the average frame rate falls from 106.7 FPS at 1920x1080 to 70.2 FPS at 2560x1440, a reduction of approximately 34%. Further scaling to 3840x2160 produces an average of 42 FPS, which is a 61% drop from the 1080p figure. This steep decline underscores that the RX 7700 XT is the primary limiting factor at higher resolutions; the GPU's rendering throughput cannot keep pace with the 4x pixel count increase from 1080p to 4K.

The scaling pattern differs across presets, however. At the Low preset, the drop from 1080p (176.4 FPS) to 1440p (117.4 FPS) is 33%, but the subsequent drop to 4K (67.1 FPS) is another 43% reduction. This suggests that even at Low settings, where the GPU load is minimized, the sheer pixel count at 4K still overwhelms the graphics card. In contrast, the Ultra preset shows an even steeper degradation: 71.9 FPS at 1080p falls to 48.7 FPS at 1440p (a 32% drop), and then to 26.8 FPS at 4K (a 45% drop from 1440p). This indicates that the combination of high pixel count and intensive graphical effects at Ultra creates a compounding load on the GPU.

The data also reveals that the resolution scaling is not purely linear. From 1080p to 1440p, the average FPS loss across all presets is roughly 30-35%, which is consistent with the 1.78x increase in pixel count. However, from 1440p to 4K, the FPS loss is more pronounced, ranging from 43% to 45%, despite the pixel count only increasing by 2.25x. This suggests that the GPU's memory bandwidth or fill rate becomes a bottleneck at 4K, as the 12 GB frame buffer and 432.0 GB/s bandwidth are strained by the higher resolution demands. For users targeting 4K, the data shows that only the Low preset (67.1 FPS) approaches playability, while Medium (62.2 FPS) and High (42 FPS) fall short of smooth gameplay.

CPU Role

The AMD Ryzen 7 5700, with its 8 cores and 16 threads, provides ample processing headroom for Archeage, a title that is not traditionally known for extreme multi-threading demands. The CPU's benchmark scores are strong; its Cinebench R23 multicore score of 20655 places it in the 84th percentile of all CPUs, with an average benchmark score of 27220. This places it slightly ahead of the Intel Core i9-9900K, which has an average score of 27043, a delta of 0.7%. The Ryzen 7 5700's single-thread performance, as measured by the 3dmark_single_thread score of 901, is also robust, ensuring that legacy game engines that rely on a few fast cores will not be starved.

In the context of Archeage, the CPU's role is most evident at 1080p, where the lower resolution reduces the GPU's workload and allows the processor to become the performance limiter. At 1080p Low, the system achieves 176.4 FPS, which is the highest measured result across all configurations. This high frame rate suggests that the CPU is capable of feeding the GPU with enough draw calls to sustain such performance. The difference between 1080p Low (176.4 FPS) and 1080p Medium (158.3 FPS) is only 10%, indicating that the CPU handles the increased draw call complexity of Medium settings without significant strain.

However, the CPU's influence diminishes as resolution increases. At 4K Low, the frame rate drops to 67.1 FPS, which is a 62% reduction from 1080p Low. This dramatic drop is not due to CPU limitations but rather the GPU's inability to process the increased pixel load. The data shows that the Ryzen 7 5700's 16 threads and 16 MB of L3 cache provide sufficient headroom for Archeage's MMO environments, which often involve many players and entities on screen. The CPU's 3.70 GHz base clock and 4.60 GHz boost clock ensure responsive performance in crowded areas, and its 65 W TDP indicates efficient operation. The benchmark results show that the CPU's multithreaded performance, as evidenced by the Passmark multithread score of 24303, is more than adequate for this title, meaning that users should focus on GPU settings to improve frame rates at higher resolutions.

GPU Role

The AMD Radeon RX 7700 XT is the dominant factor in determining Archeage's performance, particularly at 1440p and 4K resolutions. The GPU's 12 GB of GDDR6 memory and 432.0 GB/s bandwidth are critical for handling the large textures and high-resolution assets in the game. Its benchmark scores are respectable, with a Passmark G3D score of 22547 and a 3dmark Steel Nomad DX12 score of 3316, placing it in the 73rd percentile of all GPUs. The nearest rival, the NVIDIA GeForce RTX 5060, has an average score of 30109, a delta of 0%, indicating that the RX 7700 XT is competitively positioned.

The GPU's clock speeds, with a base of 1435 MHz and a boost of 2544 MHz, are relatively high, but the data shows that they are insufficient for 4K Ultra settings. At 4K Ultra, the system produces only 26.8 FPS, which is unplayable for most users. This is a stark contrast to the 1080p Ultra result of 71.9 FPS, which is still above the 60 FPS threshold. The performance degradation from 1080p Ultra to 4K Ultra represents a 63% reduction, highlighting the GPU's limitations at extreme resolutions. The 96 ROPs and 216 TMUs are likely the bottleneck, as the pixel fill rate of 244.2 GPixel/s cannot keep up with the 8.3 million pixels at 4K.

The GPU's memory subsystem also plays a role in the performance scaling. The 192-bit bus width and 432.0 GB/s bandwidth are adequate for 1440p, where the GPU achieves 102.7 FPS at Medium settings. However, at 4K, the bandwidth requirement increases significantly, and the data suggests that the GPU is memory-limited. The difference between 4K High (42 FPS) and 4K Medium (62.2 FPS) is 48%, indicating that the increased texture detail at High puts additional pressure on the memory system. For optimal performance, the data suggests that users should stay at 1440p or below, where the RX 7700 XT can deliver frame rates above 70 FPS at High settings. At 1080p, the GPU is rarely the bottleneck, as evidenced by the high frame rates across all presets, allowing the CPU to take a more prominent role.

FAQ

Q: What is the maximum average frame rate achievable with this hardware?

A: The highest measured average frame rate is 176.4 FPS, achieved at 1920x1080 resolution with the Low settings preset.

Q: Can this system handle 4K gaming in Archeage?

A: Only at lower settings. The 4K Low preset produces 67.1 FPS, while 4K Medium drops to 62.2 FPS. The 4K High and Ultra presets yield 42 FPS and 26.8 FPS, respectively, which are likely too low for smooth gameplay.

Q: How does the CPU compare to its nearest rival in synthetic benchmarks?

A: The AMD Ryzen 7 5700 has an average benchmark score of 27220, which is 0.7% higher than the Intel Core i9-9900K's score of 27043.

Q: What is the performance difference between 1080p and 1440p at High settings?

A: At High settings, the average frame rate drops from 106.7 FPS at 1080p to 70.2 FPS at 1440p, a reduction of approximately 34%.

Q: Is the GPU or CPU the limiting factor at 1440p Medium settings?

A: The system achieves 102.7 FPS at 1440p Medium, which is a substantial frame rate. This suggests that neither component is severely bottlenecked at this configuration, though the GPU is likely the more significant constraint as resolution increases.

Q: How does the RX 7700 XT's performance compare to the RTX 5060?

A: The RX 7700 XT has an average benchmark score of 30097, while the RTX 5060 has a score of 30109, resulting in a negligible delta of 0%.

Measured FPS Breakdown

At 1920x1080, the system delivers a wide range of performance depending on the settings preset. With Low settings, the average frame rate is 176.4 FPS, which is the highest measured result. Medium settings produce 158.3 FPS, while High settings yield 106.7 FPS. The Ultra preset is the most demanding at this resolution, resulting in an average of 71.9 FPS.

Moving to 2560x1440, the frame rates decrease across all presets. Low settings produce an average of 117.4 FPS, which remains highly playable. Medium settings deliver 102.7 FPS, and High settings drop to 70.2 FPS. The Ultra preset at 1440p yields 48.7 FPS, indicating that this setting is not ideal for smooth gameplay at this resolution.

At 3840x2160, the performance drops significantly, reflecting the GPU's limitations. The Low preset is the only one that approaches playable territory, with an average of 67.1 FPS. Medium settings produce 62.2 FPS, while High settings fall to 42 FPS. The Ultra preset is the most demanding, yielding only 26.8 FPS, which is well below the threshold for comfortable play. The data shows a clear trend: for consistent frame rates above 60 FPS, users should opt for 1440p with Medium settings or lower, or 1080p with High settings or lower.