NVIDIA RTX 5000 Ada Generation vs NVIDIA Tesla V100S PCIe 32 GB Comparison
NVIDIA RTX 5000 Ada Generation
Tesla V100S PCIe 32 GB
PERFORMANCE BENCHMARKS
Analysis: NVIDIA RTX 5000 Ada Generation vs NVIDIA Tesla V100S PCIe 32 GB
The NVIDIA Tesla V100S PCIe 32 GB and the NVIDIA RTX 5000 Ada Generation are both 32 GB professional accelerators, yet they are separated by four years and two architecture generations. The benchmark data shows a clear split: the older Tesla V100S leads in the OpenCL compute test, while the RTX 5000 Ada offers a distinctly modern feature set and higher raw throughput. Neither card dominates outright; the choice depends entirely on whether the workload prioritizes legacy compute performance or contemporary rendering capabilities.
The Verdict
The data indicates that the Tesla V100S PCIe 32 GB is the stronger choice for pure compute workloads that rely on OpenCL, as it scores 194415 in that benchmark, which is 10.9% ahead of the RTX 5000 Ada’s 175286 OpenCL result. This lead places the V100S at the 98th percentile among all GPUs, matching the RTX 5000 Ada’s percentile ranking. For users running legacy compute stacks or applications that are heavily optimized for Volta’s architecture, the V100S is the safer pick, especially given its 1.13 TB/s memory bandwidth, which is nearly double that of the RTX 5000 Ada.
Conversely, the RTX 5000 Ada Generation is the obvious selection for any workload involving real-time graphics, ray tracing, or DirectX 12 Ultimate features. It supports 4x DisplayPort 1.4a outputs, which the V100S lacks entirely, and it includes 100 dedicated RT cores. Its boost clock of 2550 MHz is dramatically higher than the V100S’s 1597 MHz, and its FP32 throughput of 65.28 TFLOPS is 4x that of the V100S. The RTX 5000 Ada also runs on the PCIe 4.0 bus interface, doubling the V100S’s PCIe 3.0 bandwidth, which matters for data transfer in multi-GPU or high-bandwidth storage scenarios.
Architecture Differences
The architectural gap between these two cards is substantial. The Tesla V100S is built on the Volta architecture using a 12 nm process at TSMC, packing 21,100 million transistors into an 815 mm² die. In contrast, the RTX 5000 Ada uses the Ada Lovelace architecture on a 5 nm process, fitting 76,300 million transistors—over 3.6x more—into a smaller 609 mm² die. This results in a transistor density of 125.3M per mm² for Ada versus just 25.9M per mm² for Volta.
Memory configurations differ fundamentally. The V100S uses 32 GB of HBM2 with a 4096-bit bus, yielding 1.13 TB/s of bandwidth. The RTX 5000 Ada uses 32 GB of GDDR6 on a 256-bit bus, providing 576.0 GB/s—roughly half the bandwidth. However, the Ada card compensates with a higher effective memory clock of 18 Gbps versus the V100S’s 2.2 Gbps effective.
Core counts and capabilities also diverge sharply. The V100S has 5120 shading units, 320 TMUs, 128 ROPs, and 640 tensor cores. The RTX 5000 Ada has 12800 shading units, 400 TMUs, 176 ROPs, and 400 tensor cores. Critically, the Ada card introduces 100 RT cores, which are absent from the V100S. The FP16 performance ratio tells a story too: the V100S achieves 32.71 TFLOPS FP16 at a 2:1 ratio relative to FP32, while the RTX 5000 Ada delivers 65.28 TFLOPS FP16 at a 1:1 ratio, meaning it does not sacrifice FP32 throughput for FP16.
Where Each One Wins
The Tesla V100S wins in the compute benchmark that is recorded. Its OpenCL score of 194415 is 5.3% higher than the RTX 5000 Ada’s average benchmark score of 184664, and it also sits 3.9% above the NVIDIA A100 SXM4 40 GB. This suggests that the V100S retains an edge in unmodified OpenCL compute workloads, likely due to its superior memory bandwidth and the maturity of its Volta compute stack.
The RTX 5000 Ada wins in every other measurable category. Its FP32 rate of 65.28 TFLOPS is exactly 4x the V100S’s 16.35 TFLOPS. Its pixel rate of 448.8 GPixel/s is more than double the V100S’s 204.4 GPixel/s, and its texture rate of 1,020.0 GTexel/s is exactly double the V100S’s 511.0 GTexel/s. The Ada card also supports DirectX 12 Ultimate (12_2), versus the V100S’s DirectX 12 (12_1), and it has 100 RT cores for hardware-accelerated ray tracing. For any graphics-intensive task—rendering, simulation, or visualization—the RTX 5000 Ada is unequivocally superior.
FAQ
Q: Which card has higher raw compute throughput?
A: The RTX 5000 Ada Generation, with 65.28 TFLOPS FP32, which is 4x the Tesla V100S’s 16.35 TFLOPS.
Q: Why does the Tesla V100S score higher in OpenCL?
A: The V100S scores 194415 in OpenCL versus 175286 for the RTX 5000 Ada, a 10.9% advantage. This is likely tied to its 1.13 TB/s memory bandwidth, which is nearly double the 576.0 GB/s of the Ada card.
Q: Does the RTX 5000 Ada support ray tracing?
A: Yes, it includes 100 dedicated RT cores. The Tesla V100S has no RT cores listed in its specifications.
Q: Can either card be used for display output?
A: Only the RTX 5000 Ada, which has 4x DisplayPort 1.4a outputs. The Tesla V100S has no display outputs.
Q: What is the memory type difference?
A: The V100S uses 32 GB of HBM2 with a 4096-bit bus, while the RTX 5000 Ada uses 32 GB of GDDR6 with a 256-bit bus.
Q: How do the cards compare in average benchmark score?
A: The Tesla V100S averages 194415, while the RTX 5000 Ada averages 184664, giving the V100S a 5.3% lead.
Head-to-Head Benchmarks
The only direct head-to-head benchmark available is Geekbench OpenCL, and it clearly favors the Tesla V100S. The V100S scores 194415, while the RTX 5000 Ada scores 175286, resulting in a 10.9% delta in favor of the Volta card. This is a significant margin that cannot be ignored.
When placed in the broader context of each card’s nearest rivals, the picture sharpens. The V100S’s score of 194415 is just 0.8% below the NVIDIA RTX 6000D (195964), 3.9% above the A100 SXM4 40 GB (187147), and 5.8% above the A100 SXM4 80 GB (183725). This places the V100S at the top tier of compute accelerators, just behind the RTX 6000D.
The RTX 5000 Ada’s average score of 184664 is 0.5% above the A100 SXM4 80 GB (183725), 1.4% above the RTX PRO 5000 Blackwell (182109), and 3.7% above the GeForce RTX 4090 D (178050). However, it trails the A100 SXM4 40 GB (187147) by 1.3%. The Ada card’s Vulkan score of 194041 is notably strong, nearly matching the V100S’s OpenCL score, but no Vulkan score exists for the V100S, so no direct comparison is possible.
The benchmark data shows that while the V100S wins the compute race, the RTX 5000 Ada’s architectural advantages in shading units, clock speed, and RT cores mean that any workload that can leverage those features will see a massive performance uplift. For instance, the Ada card’s 12800 shading units are 2.5x the V100S’s 5120, and its boost clock of 2550 MHz is 59.7% higher. These factors combine to produce the 4x FP32 throughput difference, which is the largest single performance gap between the two cards.