NVIDIA RTX 4000 Ada Generation vs NVIDIA Tesla V100S PCIe 32 GB Comparison
NVIDIA RTX 4000 Ada Generation
Tesla V100S PCIe 32 GB
PERFORMANCE BENCHMARKS
Analysis: NVIDIA RTX 4000 Ada Generation vs NVIDIA Tesla V100S PCIe 32 GB
The NVIDIA Tesla V100S PCIe 32 GB and the NVIDIA RTX 4000 Ada Generation target entirely different corners of the professional GPU market. The data shows a clear split: the Tesla V100S is an end-of-life compute accelerator built for raw throughput, while the RTX 4000 Ada is an active, power-efficient workstation card with modern features. Benchmark results indicate that the Tesla V100S holds a decisive lead in the only shared test, but the RTX 4000 Ada counters with architectural advantages, newer interfaces, and display support that the Tesla completely lacks.
Head-to-Head Benchmarks
The sole direct comparison available is the Geekbench OpenCL test, and the result is a landslide. The Tesla V100S scores 194,415, while the RTX 4000 Ada scores 146,593. That is a 32.6% advantage for the Tesla V100S, making it the clear winner in raw compute throughput. This margin is substantial and reflects the fundamental design priorities of the two cards: the V100S is built for data-center compute density, while the RTX 4000 Ada is a more balanced workstation part.
Placement among rivals reinforces this gap. The Tesla V100S sits at the 98th percentile of all GPUs, with an average benchmark score of 194,415. It trails the NVIDIA RTX 6000D by just 0.8% (195,964) and beats the A100 SXM4 40 GB by 3.9% (187,147) and the A100 SXM4 80 GB by 5.8% (183,725). The RTX 4000 Ada, by contrast, is at the 95th percentile with an average score of 135,218. Its nearest rival, the NVIDIA A10M, is statistically tied at 0.0% delta (135,230), and it sits just 0.1% behind the AMD Radeon PRO W6800 (135,396). In absolute terms, the RTX 4000 Ada’s OpenCL score is roughly 75% of the Tesla V100S’s, a massive chasm for any workload that scales with compute.
It is notably the RTX 4000 Ada has a second benchmark result — a Geekbench Vulkan score of 123,842 — but no comparable Vulkan result exists for the Tesla V100S. This absence is itself informative: the Tesla V100S has no display outputs and is not designed for graphics workloads where Vulkan would matter. The head-to-head data, therefore, is one-sided, but the magnitude of the Tesla’s win in OpenCL is enough to define the comparison.
Where Each One Wins
The Tesla V100S wins decisively in any workload that stresses raw FP32 compute or memory bandwidth. Its FP32 throughput is 16.35 TFLOPS, which is lower than the RTX 4000 Ada’s 26.73 TFLOPS, yet the Tesla still achieves a 32.6% higher OpenCL score. The explanation lies in memory: the V100S has 1.13 TB/s of bandwidth from its 4096-bit HBM2 bus, versus 360.0 GB/s from the RTX 4000 Ada’s 160-bit GDDR6 bus. For memory-bound compute tasks — large matrix operations, scientific simulations, or data processing — the Tesla’s 3.1x bandwidth advantage is decisive. It also offers 32 GB of memory versus 20 GB, and 640 tensor cores versus 192, making it the pick for large-model inference or training where capacity and tensor throughput matter more than clock speed.
The RTX 4000 Ada wins in every category related to efficiency, modern features, and practical workstation use. It has 48 dedicated ray tracing cores, whereas the Tesla V100S has none. Its FP16 performance is 26.73 TFLOPS at a 1:1 ratio, while the Tesla’s FP16 is 32.71 TFLOPS but at a 2:1 rate, meaning it is half the FP32 rate — a less flexible arrangement. The RTX 4000 Ada also supports DirectX 12 Ultimate (12_2), while the Tesla is limited to DirectX 12 (12_1). For rendering, simulation, or any graphics-adjacent task, the Ada card is the only viable option because the Tesla has no display outputs at all. The RTX 4000 Ada’s 4x DisplayPort 1.4a outputs make it a functional workstation card, while the Tesla is a headless server part.
Architecture Differences
The architectural gap is generational. The Tesla V100S uses the GV100 chip on the Volta architecture, built on TSMC’s 12 nm process. It packs 21,100 million transistors into an 815 mm² die, yielding a transistor density of 25.9 million per mm². The RTX 4000 Ada uses the AD104 chip on the Ada Lovelace architecture, built on TSMC’s 5 nm process. It contains 35,800 million transistors in a much smaller 294 mm² die, achieving 121.8 million transistors per mm² — a density nearly five times higher. This explains the RTX 4000 Ada’s massive efficiency advantage: it delivers 26.73 TFLOPS FP32 at a 130 W TDP, while the Tesla delivers only 16.35 TFLOPS at 250 W.
Core counts differ significantly. The Tesla has 5,120 shading units, 320 TMUs, and 128 ROPs, alongside 640 tensor cores. The RTX 4000 Ada has 6,144 shading units, 192 TMUs, and 64 ROPs, with 192 tensor cores and 48 RT cores. The Ada card has more shaders but fewer texture and raster units, reflecting its focus on compute over traditional pixel throughput. Pixel rate favors the Tesla at 204.4 GPixel/s versus 139.2 GPixel/s, and texture rate also favors the Tesla at 511.0 GTexel/s versus 417.6 GTexel/s. Clock speeds are reversed: the RTX 4000 Ada boosts to 2175 MHz from a 1500 MHz base, while the Tesla boosts to 1597 MHz from 1245 MHz.
Memory architecture is entirely different. The Tesla uses 32 GB of HBM2 on a 4096-bit bus, whereas the RTX 4000 Ada uses 20 GB of GDDR6 on a 160-bit bus. The Tesla’s memory clock is 1107 MHz (2.2 Gbps effective), while the Ada card runs at 2250 MHz (18 Gbps effective). The Tesla’s bandwidth advantage is enormous, but the Ada card’s higher per-pin speed allows for a smaller, cheaper bus. The Tesla uses PCIe 3.0 x16, while the RTX 4000 Ada uses PCIe 4.0 x16, doubling the interconnect bandwidth for data transfer.
FAQ
Q: Which GPU has higher raw compute performance?
A: The Tesla V100S wins the only shared benchmark, scoring 194,415 in Geekbench OpenCL versus 146,593 for the RTX 4000 Ada, a 32.6% advantage. However, the RTX 4000 Ada has higher theoretical FP32 throughput at 26.73 TFLOPS versus 16.35 TFLOPS.
Q: Does the RTX 4000 Ada support ray tracing?
A: Yes. The RTX 4000 Ada has 48 dedicated RT cores, while the Tesla V100S has none. This makes the Ada card suitable for rendering workloads, whereas the Tesla is compute-only.
Q: Can the Tesla V100S output video to a display?
A: No. The Tesla V100S has no display outputs, while the RTX 4000 Ada has 4x DisplayPort 1.4a connectors. The Tesla is designed for headless server operation.
Q: How do their power requirements compare?
A: The RTX 4000 Ada has a 130 W TDP and uses a single 16-pin connector with a 300 W suggested PSU. The Tesla V100S has a 250 W TDP, uses two 8-pin connectors, and requires a 600 W PSU.
Q: Which card has more memory bandwidth?
A: The Tesla V100S has 1.13 TB/s of bandwidth from its 4096-bit HBM2 bus. The RTX 4000 Ada has 360.0 GB/s from its 160-bit GDDR6 bus. The Tesla has over three times the bandwidth.
Q: What is the production status of each card?
A: The Tesla V100S is end-of-life, released in November 2019. The RTX 4000 Ada is active, released in August 2023.
The Verdict
Pick the Tesla V100S if your priority is maximum compute throughput and memory capacity in a server environment. The data shows it outperforms the RTX 4000 Ada by 32.6% in OpenCL, offers 12 GB more memory, and has 3.1x the memory bandwidth. It also outperforms the A100 SXM4 40 GB by 3.9% and the A100 SXM4 80 GB by 5.8%, making it a surprisingly competitive compute card even in its end-of-life state. Its 98th percentile ranking versus the RTX 4000 Ada’s 95th percentile confirms its higher absolute performance. This is the card for batch processing, large dataset workloads, or any task where memory bandwidth is the bottleneck.
Pick the RTX 4000 Ada if you need a modern, efficient, and versatile workstation GPU. It is the only choice with display outputs, ray tracing, and DirectX 12 Ultimate support. Its 130 W TDP is nearly half the Tesla’s 250 W, and it fits in a single slot with a single 16-pin connector, versus the Tesla’s dual-slot design with two 8-pin connectors. Its FP32 throughput is 63% higher on paper (26.73 TFLOPS versus 16.35 TFLOPS), and its 5 nm process with 121.8M transistors per mm² represents a far more modern design. For interactive work, rendering, or any graphics-adjacent task, the Ada card is the only rational selection.
The verdict is not close for compute: the Tesla V100S wins outright. The verdict is not close for workstation features: the RTX 4000 Ada wins outright. Choose based on your workload, not on marketing.
Specification Differences
| Specification | NVIDIA Tesla V100S PCIe 32 GB | NVIDIA RTX 4000 Ada Generation |
|---|---|---|
| Architecture | Volta | Ada Lovelace |
| Process Node | 12 nm | 5 nm |
| Transistors | 21,100 million | 35,800 million |
| Die Size | 815 mm² | 294 mm² |
| Transistor Density | 25.9M / mm² | 121.8M / mm² |
| Base Clock | 1245 MHz | 1500 MHz |
| Boost Clock | 1597 MHz | 2175 MHz |
| Memory Size | 32 GB | 20 GB |
| Memory Type | HBM2 | GDDR6 |
| Memory Bus | 4096 bit | 160 bit |
| Memory Bandwidth | 1.13 TB/s | 360.0 GB/s |
| Memory Clock | 1107 MHz (2.2 Gbps effective) | 2250 MHz (18 Gbps effective) |
| Shading Units | 5120 | 6144 |
| TMUs | 320 | 192 |
| ROPs | 128 | 64 |
| RT Cores | None | 48 |
| Tensor Cores | 640 | 192 |
| Pixel Rate | 204.4 GPixel/s | 139.2 GPixel/s |
| Texture Rate | 511.0 GTexel/s | 417.6 GTexel/s |
| FP32 Performance | 16.35 TFLOPS | 26.73 TFLOPS |
| FP16 Performance | 32.71 TFLOPS (2:1) | 26.73 TFLOPS (1:1) |
| TDP | 250 W | 130 W |
| Slot Width | Dual-slot | Single-slot |
| Power Connectors | 2x 8-pin | 1x 16-pin |
| Suggested PSU | 600 W | 300 W |
| Bus Interface | PCIe 3.0 x16 | PCIe 4.0 x16 |
| Display Outputs | No outputs | 4x DisplayPort 1.4a |
| DirectX Support | 12 (12_1) | 12 Ultimate (12_2) |
| Dimensions | Not specified | 245 mm (9.6 inches) x 112 mm (4.4 inches) |
| Production Status | End-of-life | Active |