NVIDIA Quadro K620 vs NVIDIA RTX PRO 5000 72 GB Blackwell Comparison

NVIDIA
GEFORCE

NVIDIA Quadro K620

CORE STATE GM107
VRAM 2 GB
CLOCK SPEED 1124 MHz
TDP 45 W
BUS WIDTH 128 bit
ARCHITECTURE Maxwell
nm
PROCESS 28 nm
LAUNCH DATE 2014
VS
NVIDIA
GEFORCE

RTX PRO 5000 72 GB Blackwell

CORE STATE GB202
VRAM 72 GB
CLOCK SPEED 2377 MHz
TDP 300 W
BUS WIDTH 384 bit
ARCHITECTURE Blackwell 2.0
nm
PROCESS 5 nm
LAUNCH DATE 2025

PERFORMANCE BENCHMARKS

geekbench_opencl
6,693
N/A
geekbench_vulkan
5,870
N/A
3dmark_3dmark_steel_nomad_dx12
N/A
9,579.5
passmark_directx_10
N/A
175
passmark_directx_11
N/A
219
passmark_directx_12
N/A
78
passmark_directx_9
N/A
311
passmark_g2d
N/A
914
passmark_g3d
N/A
24,310
passmark_gpu_compute
N/A
15,667

Analysis: NVIDIA Quadro K620 vs NVIDIA RTX PRO 5000 72 GB Blackwell

FAQ

Q: How does the average benchmark score of the RTX PRO 5000 72 GB Blackwell compare to the Quadro K620?

A: The RTX PRO 5000 72 GB Blackwell has an average benchmark score of 6407, while the Quadro K620 scores 6282. The RTX PRO 5000 sits 0.3% above the GeForce GTX 460 SE and GTX 580M, while the K620 is 0.2% above the GeForce RTX 5070 Ti SUPER and RTX 4070 Ti SUPER AD102 in its nearest rival group.

Q: What is the performance percentile ranking of each card?

A: The RTX PRO 5000 72 GB Blackwell ranks in the 37th percentile of all GPUs, while the Quadro K620 ranks in the 36th percentile. The data indicates a near-identical overall standing despite their architectural differences.

Q: Which card has more memory bandwidth?

A: The RTX PRO 5000 72 GB Blackwell features 1.34 TB/s of bandwidth across a 384-bit bus with 72 GB of GDDR7 memory. The Quadro K620 offers 28.80 GB/s over a 128-bit bus with 2 GB of DDR3 memory — a difference of roughly 46.5 times in favor of the RTX PRO.

Q: What are the DirectX support levels for each card?

A: The RTX PRO 5000 72 GB Blackwell supports DirectX 12 Ultimate (12_2), while the Quadro K620 supports DirectX 12 (11_0). Both cards support OpenGL 4.6 and Vulkan 1.4 according to the specification data.

Q: Which card has a higher pixel fill rate?

A: The RTX PRO 5000 72 GB Blackwell delivers 380.3 GPixel/s, compared to the Quadro K620's 17.98 GPixel/s. That is a 21.1x advantage for the newer Blackwell card.

Q: What is the production status of each card?

A: The RTX PRO 5000 72 GB Blackwell is listed as "Active" with a release date of 2025-10-20, while the Quadro K620 is "End-of-life" with a release date of 2014-07-21. The K620's predecessor is Quadro Fermi and its successor is Quadro Maxwell.

Architecture Differences

The RTX PRO 5000 72 GB Blackwell is built on the GB202 chip using the Blackwell 2.0 architecture, fabricated on a 5 nm process at TSMC. The die measures 750 mm² and contains 92,200 million transistors, yielding a transistor density of 122.9M per mm². The Quadro K620 uses the GM107 chip on the Maxwell architecture, with a 28 nm TSMC process, a 148 mm² die, and 1,870 million transistors at a density of 12.6M per mm². The density gap is striking: the Blackwell chip packs nearly 10 times more transistors per square millimeter.

The RTX PRO 5000 features 14,080 shading units, 440 TMUs, and 160 ROPs. It also includes 110 RT cores and 440 tensor cores — hardware entirely absent from the Quadro K620, which has 384 shading units, 24 TMUs, and 16 ROPs. The K620 has no RT or tensor cores, reflecting its Maxwell-era design without dedicated ray tracing or AI acceleration hardware.

Memory architecture differs fundamentally. The RTX PRO 5000 uses 72 GB of GDDR7 on a 384-bit bus, while the K620 uses 2 GB of DDR3 on a 128-bit bus. Clock speeds also diverge: the Blackwell part runs at 1740 MHz base and 2377 MHz boost, whereas the K620 runs at 1058 MHz base and 1124 MHz boost. The memory clock for the RTX PRO is 1750 MHz (28 Gbps effective), while the K620's memory runs at 900 MHz (1800 Mbps effective).

The power envelope reflects the performance gap. The RTX PRO 5000 has a TDP of 300 W, requires a 16-pin power connector, and suggests a 700 W PSU. The K620 draws 45 W, needs no external power connector, and suggests a 200 W PSU. The interface also differs: PCIe 5.0 x16 on the RTX PRO versus PCIe 2.0 x16 on the K620. Display outputs show four DisplayPort 2.1b connectors on the Blackwell card versus one DVI and one DisplayPort 1.2 on the K620.

Head-to-Head Benchmarks

The head-to-head benchmark section contains no direct comparison tests between the two cards, so the analysis must rely on their individual benchmark suites and average scores. The RTX PRO 5000 72 GB Blackwell was tested across 3DMark Steel Nomad DX12 (score 9579.5) and multiple PassMark tests: DirectX 10 (175), DirectX 11 (219), DirectX 12 (78), DirectX 9 (311), G2D (914), G3D (24310), and GPU compute (15667). The Quadro K620 was tested with Geekbench OpenCL (6693) and Geekbench Vulkan (5870).

The average benchmark scores are close: 6407 for the RTX PRO 5000 versus 6282 for the K620, a delta of roughly 2%. Interestingly, the nearest rival data shows both cards positioned near peers with similar average scores. The RTX PRO 5000's closest rivals are the GTX 460 SE and GTX 580M at 6389 (0.3% delta), and the AMD Radeon Vega 10 Mobile at 6476 (-1.1% delta) plus the Quadro M5000M at 6481 (-1.1% delta). The K620's nearest rivals include the RTX 5070 Ti SUPER and RTX 4070 Ti SUPER AD102 at 6270 (0.2% delta), the AMD Radeon R7 M350 at 6327 (-0.7%), and the Radeon Pro WX 4100 at 6330 (-0.8%).

The PassMark G3D score of 24310 for the RTX PRO 5000 indicates strong raw graphics performance relative to its average, while the K620's Geekbench scores suggest a different performance profile. The compute score of 15667 for the Blackwell card in PassMark GPU compute highlights substantial parallel processing capability, whereas the K620's absence of a comparable compute benchmark leaves a gap in direct comparison. Given the lack of head-to-head tests, the data shows two cards with similar aggregate scores but vastly different architectural capabilities.

The Verdict

The data presents an unusual case: two cards with near-identical average benchmark scores (6407 vs 6282) and nearly matching percentiles (37th vs 36th) yet completely different design philosophies. The RTX PRO 5000 72 GB Blackwell is a modern, active-production workstation card with massive memory, ray tracing, and tensor core hardware. The Quadro K620 is an end-of-life entry-level card from 2014 with modest specs.

For users requiring modern features — ray tracing acceleration, tensor cores for AI workloads, 72 GB of GDDR7 memory, and PCIe 5.0 connectivity — the RTX PRO 5000 is the only choice. The Blackwell card's 1.34 TB/s bandwidth, 66.94 TFLOPS FP32 performance, and 110 RT cores place it in a different performance class entirely. The K620's 863.2 GFLOPS FP32 and 28.80 GB/s bandwidth cannot handle similar workloads.

However, the average benchmark scores suggest that in certain legacy or specific test scenarios, the K620 holds its own relative to its peers. The K620's 36th percentile versus the RTX PRO 5000's 37th percentile indicates that both cards sit in similar positions within the overall GPU landscape, likely because the average score aggregates very different test types.

The production status is decisive: the RTX PRO 5000 is active and supported, while the K620 is end-of-life. Users needing a current workstation GPU with future-proofing should select the RTX PRO 5000. Users constrained to legacy systems with PCIe 2.0 and minimal power budgets might consider the K620, but the spec sheet shows no scenario where the older card outperforms the newer one in raw capability.

Specification Differences

| Specification | RTX PRO 5000 72 GB Blackwell | Quadro K620 |

|---|---|---|

| Architecture | Blackwell 2.0 | Maxwell |

| Process Node | 5 nm | 28 nm |

| Transistors | 92,200 million | 1,870 million |

| Die Size | 750 mm² | 148 mm² |

| Base Clock | 1740 MHz | 1058 MHz |

| Boost Clock | 2377 MHz | 1124 MHz |

| Memory Size | 72 GB | 2 GB |

| Memory Type | GDDR7 | DDR3 |

| Memory Bus | 384 bit | 128 bit |

| Memory Bandwidth | 1.34 TB/s | 28.80 GB/s |

| Shading Units | 14080 | 384 |

| TMUs | 440 | 24 |

| ROPs | 160 | 16 |

| RT Cores | 110 | None |

| Tensor Cores | 440 | None |

| Pixel Rate | 380.3 GPixel/s | 17.98 GPixel/s |

| Texture Rate | 1,045.9 GTexel/s | 26.98 GTexel/s |

| FP32 | 66.94 TFLOPS | 863.2 GFLOPS |

| FP16 | 66.94 TFLOPS (1:1) | None |

| TDP | 300 W | 45 W |

| Power Connectors | 1x 16-pin | None |

| Suggested PSU | 700 W | 200 W |

| Bus Interface | PCIe 5.0 x16 | PCIe 2.0 x16 |

| Display Outputs | 4x DisplayPort 2.1b | 1x DVI, 1x DisplayPort 1.2 |

| Slot Width | Dual-slot | Single-slot |

| Length | 267 mm | 160 mm |

| Height | 111 mm | 69 mm |

| Width | 40 mm | Not specified |

| Production Status | Active | End-of-life |

| Release Date | 2025-10-20 | 2014-07-21 |

| Predecessor | Workstation Ada | Quadro Fermi |

| Successor | None | Quadro Maxwell |

Where Each One Wins

The RTX PRO 5000 72 GB Blackwell dominates in every measurable specification category. Its FP32 throughput of 66.94 TFLOPS versus 863.2 GFLOPS represents a 77.5x advantage. The pixel rate of 380.3 GPixel/s versus 17.98 GPixel/s gives it a 21.1x lead. Texture rate shows a similar pattern: 1,045.9 GTexel/s versus 26.98 GTexel/s, a 38.8x difference. Memory bandwidth of 1.34 TB/s versus 28.80 GB/s provides a 46.5x advantage for large data transfers.

The Quadro K620's wins are more contextual than absolute. It requires only 45 W of power with no external connector, making it suitable for systems with minimal power delivery. Its single-slot design and 160 mm length allow installation in compact chassis where the dual-slot, 267 mm RTX PRO 5000 will not fit. The K620's PCIe 2.0 interface is compatible with older motherboards, whereas the RTX PRO 5000's PCIe 5.0 slot may not be available in legacy systems.

In benchmark terms, the K620's Geekbench OpenCL score of 6693 and Vulkan score of 5870 demonstrate credible performance in those specific tests, though no comparable Geekbench results exist for the RTX PRO 5000. The RTX PRO 5000's PassMark G3D score of 24310 and GPU compute score of 15667 show its strength in DirectX-based workloads, while the K620 has no PassMark results to compare.

For use cases involving ray tracing, AI inference, large model training, or high-resolution visualization, the RTX PRO 5000 is the clear winner based on RT cores, tensor cores, and memory capacity. For legacy application compatibility, minimal power draw, or space-constrained builds, the K620's lower requirements may be advantageous. The data shows no benchmark where the K620 outperforms the RTX PRO 5000 in raw performance; its advantages are purely practical — power, size, and interface compatibility.

DETAILED SPECIFICATIONS

SPECIFICATION
Quadro K620
RTX PRO 5000 72 GB Blackwell
Core Specs
Shading Units
384
14,080 +3566.7%
Shaders
384
14,080 +3566.7%
TMUs
24
440 +1733.3%
ROPs
16
160 +900.0%
SM Count
—
110
Clocks
Base Clock
1058 MHz
1740 MHz
Boost Clock
1124 MHz
2377 MHz
Memory Clock
900 MHz 1800 Mbps effective
1750 MHz 28 Gbps effective
Memory
Memory Size
2 GB
72 GB
VRAM (MB)
2,048
73,728 +3500.0%
Memory Type
DDR3
GDDR7
Memory Bus
128 bit
384 bit
Bandwidth
28.80 GB/s
1.34 TB/s
Cache
L1 Cache
64 KB (per SMM)
128 KB (per SM)
L2 Cache
2 MB
96 MB
Performance
Pixel Rate
17.98 GPixel/s
380.3 GPixel/s
Texture Rate
26.98 GTexel/s
1,045.9 GTexel/s
FP32 (TFLOPS)
863.2 GFLOPS
66.94 TFLOPS
FP64 (TFLOPS)
26.98 GFLOPS (1:32)
1,045.9 GFLOPS (1:64)
FP16 (TFLOPS)
—
66.94 TFLOPS (1:1)
AI/RT
RT Cores
—
110
Tensor Cores
—
440
Power
TDP
45 W
300 W
TDP (W)
45
300 +566.7%
Suggested PSU
200 W
700 W
Power Connectors
None
1x 16-pin
Architecture
Architecture
Maxwell
Blackwell 2.0
GPU Name
GM107
GB202
Generation
Quadro Kepler (Kx200)
Blackwell PRO W (x000)
Process Size
28 nm
5 nm
Transistors
1,870 million
92,200 million
Die Size
148 mm²
750 mm²
Foundry
TSMC
TSMC
Density
12.6M / mm²
122.9M / mm²
API Support
DirectX
12 (11_0)
12 Ultimate (12_2)
OpenGL
4.6
4.6
Vulkan
1.4
1.4
OpenCL
3.0
3.0
CUDA
5.0
12.0
Shader Model
6.7 (5.1)
6.9
Physical
Slot Width
Single-slot
Dual-slot
Length
160 mm 6.3 inches
267 mm 10.5 inches
Height
69 mm 2.7 inches
111 mm 4.4 inches
Outputs
1x DVI1x DisplayPort 1.2
4x DisplayPort 2.1b
Bus Interface
PCIe 2.0 x16
PCIe 5.0 x16
Other
Production
End-of-life
Active
Predecessor
Quadro Fermi
Workstation Ada
Successor
Quadro Maxwell
—
View Quadro K620 Details View RTX PRO 5000 72 GB Blackwell Details