NVIDIA Quadro K4000M vs NVIDIA RTX PRO 5000 72 GB Blackwell Comparison

NVIDIA
GEFORCE

NVIDIA Quadro K4000M

CORE STATE GK104
VRAM 4 GB
CLOCK SPEED 601 MHz
TDP 100 W
BUS WIDTH 256 bit
ARCHITECTURE Kepler
nm
PROCESS 28 nm
LAUNCH DATE 2012
VS
NVIDIA
GEFORCE

RTX PRO 5000 72 GB Blackwell

CORE STATE GB202
VRAM 72 GB
CLOCK SPEED 2377 MHz
TDP 300 W
BUS WIDTH 384 bit
ARCHITECTURE Blackwell 2.0
nm
PROCESS 5 nm
LAUNCH DATE 2025

PERFORMANCE BENCHMARKS

geekbench_opencl
5,986
N/A
3dmark_3dmark_steel_nomad_dx12
N/A
9,579.5
passmark_directx_10
N/A
175
passmark_directx_11
N/A
219
passmark_directx_12
N/A
78
passmark_directx_9
N/A
311
passmark_g2d
N/A
914
passmark_g3d
N/A
24,310
passmark_gpu_compute
N/A
15,667

Analysis: NVIDIA Quadro K4000M vs NVIDIA RTX PRO 5000 72 GB Blackwell

Where Each One Wins

The data presents a stark generational divide. The NVIDIA RTX PRO 5000 72 GB Blackwell is a modern compute monster, while the NVIDIA Quadro K4000M is a legacy mobile part from a different era. Their benchmark portfolios barely overlap, but where they do, the story is one of complete dominance by the newer card.

The RTX PRO 5000's benchmark results show a broad, if inconsistent, set of scores across DirectX 10, 11, 12, and 9 tests, alongside a strong G3D score of 24,310 and a GPU compute score of 15,667. Its average benchmark score sits at 6,407, placing it in the 37th percentile of all GPUs. This percentile ranking, while modest, is misleading; it reflects a comparison against a vast database of cards, including many with far more focused benchmark submissions. The K4000M, with only a single Geekbench OpenCL score of 5,986, holds a 34th percentile ranking. The near-identical percentile scores (37 vs. 34) obscure the fact that the RTX PRO 5000 is a workstation-class GPU with a much more demanding benchmark profile.

The K4000M's only win is in the field of legacy compatibility. Its sole benchmark submission is for Geekbench OpenCL, a test that the RTX PRO 5000 has no recorded result for. This suggests the K4000M was used in environments where that specific legacy workload was relevant. However, this is a narrow victory. In every other measurable category, the RTX PRO 5000 is the clear winner. It wins on raw compute, on DirectX performance, and on overall graphics capability. The data does not show a single head-to-head test where both cards have scores, but the RTX PRO 5000's Passmark G3D score of 24,310 dwarfs any plausible result from a Kepler-era mobile chip. The K4000M's 4 GB of GDDR5 memory and 89.60 GB/s bandwidth are from a different technological epoch compared to the RTX PRO 5000's 72 GB of GDDR7 and 1.34 TB/s bandwidth. For any modern professional workload, the RTX PRO 5000 is the only viable option.

Architecture Differences

The architectural divide between these two GPUs is a chasm. The RTX PRO 5000 is built on the Blackwell 2.0 architecture, using the GB202 chip, fabricated on a 5 nm process at TSMC. This is a monumental leap from the K4000M's Kepler architecture, which uses the GK104 chip on a 28 nm process, also from TSMC. The transistor counts tell the story of this generational shift. The RTX PRO 5000 packs 92,200 million transistors on a 750 mm² die, yielding a transistor density of 122.9M / mm². The K4000M, in contrast, has only 3,540 million transistors on a 294 mm² die, for a density of 12.0M / mm². This represents a staggering 25-fold increase in raw transistor count and a 10-fold increase in density.

The compute core configurations are equally divergent. The RTX PRO 5000 features 14,080 shading units, 440 TMUs, and 160 ROPs. It also includes 110 RT cores and 440 tensor cores, making it a fully featured GPU for ray tracing and AI workloads. The K4000M has just 960 shading units, 80 TMUs, and 32 ROPs, with no dedicated RT or tensor cores. The RTX PRO 5000's FP32 throughput is 66.94 TFLOPS, a figure that is over 58 times higher than the K4000M's 1,153.9 GFLOPS (approximately 1.15 TFLOPS). The RTX PRO 5000 also supports FP16 at a 1:1 ratio, a feature entirely absent from the K4000M's specifications.

Memory architecture is another point of departure. The RTX PRO 5000 uses 72 GB of GDDR7 on a 384-bit bus, delivering 1.34 TB/s of bandwidth. The K4000M uses 4 GB of GDDR5 on a 256-bit bus, delivering just 89.60 GB/s. The RTX PRO 5000's memory clock is 1750 MHz (28 Gbps effective), while the K4000M's is a paltry 700 MHz (2.8 Gbps effective). The RTX PRO 5000 supports PCIe 5.0 x16, while the K4000M uses an MXM-B (3.0) interface, designed for laptops. The RTX PRO 5000 is a dual-slot, 300 W desktop card with a 16-pin power connector, while the K4000M is a 100 W MXM module with no power connector, relying on the host system. The RTX PRO 5000 is an active production part, while the K4000M is end-of-life.

Head-to-Head Benchmarks

Direct comparisons are limited because the benchmark suites for the two cards do not overlap. The K4000M has only a Geekbench OpenCL score, while the RTX PRO 5000 has Passmark scores and a 3DMark Steel Nomad result. However, the data we do have allows for some inference. The RTX PRO 5000's Passmark G3D score is 24,310. The K4000M's average benchmark score is 5,986. While these are not the same test, the G3D score is a general measure of graphics performance, and the difference is massive. The RTX PRO 5000's score is roughly four times higher than the K4000M's entire average benchmark score.

Looking at the nearest rivals provides additional context. The RTX PRO 5000's average score of 6,407 is nearly identical to the GeForce GTX 460 SE (6,389, deltaPct 0.3) and the GeForce GTX 580M (6,389, deltaPct 0.3). It is slightly below the Radeon Vega 10 Mobile (6,476, deltaPct -1.1) and the Quadro M5000M (6,481, deltaPct -1.1). This suggests that, in the aggregate benchmark database, the RTX PRO 5000's average score is being dragged down by its low scores in certain Passmark tests (DirectX 12 at 78, DirectX 10 at 175, DirectX 11 at 219). These low scores are likely due to driver or workload-specific issues, but they pull the average down to a level comparable with much older, less capable hardware.

The K4000M, in contrast, has an average score of 5,986, which is nearly identical to the AMD FirePro W4100 (5,987, deltaPct 0) and the NVIDIA Quadro K4000 (5,982, deltaPct 0.1). It is also close to the NVIDIA RTX PRO 6000 Blackwell Server (5,996, deltaPct -0.2) and the GeForce GTX 770M (6,000, deltaPct -0.2). This tells us that, based on the limited Geekbench OpenCL data, the K4000M's performance is in line with other mid-range cards from its era. The RTX PRO 5000, despite its modern architecture, has an average score that puts it in the same ballpark as these older cards, but this is an artifact of its inconsistent Passmark results. Its peak performance, as evidenced by the 3DMark Steel Nomad score of 9,579.5 and the Passmark G3D score of 24,310, is far beyond anything the K4000M could achieve.

Specification Differences

| Specification | NVIDIA RTX PRO 5000 72 GB Blackwell | NVIDIA Quadro K4000M |

|:--- |:--- |:--- |

| Architecture | Blackwell 2.0 | Kepler |

| Chip | GB202 | GK104 |

| Process Node | 5 nm | 28 nm |

| Transistors | 92,200 million | 3,540 million |

| Die Size | 750 mm² | 294 mm² |

| Base Clock | 1740 MHz | 601 MHz |

| Boost Clock | 2377 MHz | 601 MHz |

| Memory Clock | 1750 MHz (28 Gbps effective) | 700 MHz (2.8 Gbps effective) |

| Memory Size | 72 GB | 4 GB |

| Memory Type | GDDR7 | GDDR5 |

| Memory Bus | 384 bit | 256 bit |

| Memory Bandwidth | 1.34 TB/s | 89.60 GB/s |

| Shading Units | 14080 | 960 |

| TMUs | 440 | 80 |

| ROPs | 160 | 32 |

| RT Cores | 110 | None |

| Tensor Cores | 440 | None |

| Pixel Rate | 380.3 GPixel/s | 12.02 GPixel/s |

| Texture Rate | 1,045.9 GTexel/s | 48.08 GTexel/s |

| FP32 Performance | 66.94 TFLOPS | 1,153.9 GFLOPS |

| FP16 Performance | 66.94 TFLOPS (1:1) | None |

| TDP | 300 W | 100 W |

| Slot Width | Dual-slot | MXM Module |

| Power Connectors | 1x 16-pin | None |

| Suggested PSU | 700 W | None |

| Bus Interface | PCIe 5.0 x16 | MXM-B (3.0) |

| Display Outputs | 4x DisplayPort 2.1b | Portable Device Dependent |

| DirectX Support | 12 Ultimate (12_2) | 12 (11_0) |

| Vulkan Support | 1.4 | 1.2.175 |

| Production Status | Active | End-of-life |

FAQ

Q: Which GPU is faster in raw compute performance?

A: The RTX PRO 5000 is overwhelmingly faster. Its FP32 performance is 66.94 TFLOPS, compared to the K4000M's 1,153.9 GFLOPS. The RTX PRO 5000 also has a texture rate of 1,045.9 GTexel/s versus the K4000M's 48.08 GTexel/s.

Q: How do the memory subsystems compare?

A: The RTX PRO 5000 has 72 GB of GDDR7 memory on a 384-bit bus, providing 1.34 TB/s of bandwidth. The K4000M has 4 GB of GDDR5 on a 256-bit bus, providing only 89.60 GB/s. The RTX PRO 5000's memory bandwidth is over 14 times higher.

Q: Does the K4000M have any advantages in the benchmark data?

A: The K4000M's only benchmark submission is a Geekbench OpenCL score of 5,986. The RTX PRO 5000 has no result for this specific test. This is the only area where the K4000M shows a recorded result that the RTX PRO 5000 does not have.

Q: Are these two cards comparable based on their average benchmark scores?

A: No. While the RTX PRO 5000's average score (6,407) is close to the K4000M's (5,986), this is misleading. The RTX PRO 5000's average is dragged down by low scores in some Passmark tests, while its peak scores (e.g., 24,310 in G3D) are far higher. The K4000M's single score is not representative of a comparable capability.

Q: What are the major architectural differences?

A: The RTX PRO 5000 uses the Blackwell 2.0 architecture on a 5 nm process with 92,200 million transistors. The K4000M uses the Kepler architecture on a 28 nm process with 3,540 million transistors. The RTX PRO 5000 also features 110 RT cores and 440 tensor cores, which are absent from the K4000M.

Q: Which GPU is intended for mobile use?

A: The Quadro K4000M is a mobile part, using an MXM Module form factor and an MXM-B (3.0) bus interface. The RTX PRO 5000 is a dual-slot desktop card with a PCIe 5.0 x16 interface.

DETAILED SPECIFICATIONS

SPECIFICATION
Quadro K4000M
RTX PRO 5000 72 GB Blackwell
Core Specs
Shading Units
960
14,080 +1366.7%
Shaders
960
14,080 +1366.7%
TMUs
80
440 +450.0%
ROPs
32
160 +400.0%
SM Count
—
110
Clocks
Base Clock
601 MHz
1740 MHz
Boost Clock
601 MHz
2377 MHz
Memory Clock
700 MHz 2.8 Gbps effective
1750 MHz 28 Gbps effective
Memory
Memory Size
4 GB
72 GB
VRAM (MB)
4,096
73,728 +1700.0%
Memory Type
GDDR5
GDDR7
Memory Bus
256 bit
384 bit
Bandwidth
89.60 GB/s
1.34 TB/s
Cache
L1 Cache
16 KB (per SMX)
128 KB (per SM)
L2 Cache
512 KB
96 MB
Performance
Pixel Rate
12.02 GPixel/s
380.3 GPixel/s
Texture Rate
48.08 GTexel/s
1,045.9 GTexel/s
FP32 (TFLOPS)
1,153.9 GFLOPS
66.94 TFLOPS
FP64 (TFLOPS)
48.08 GFLOPS (1:24)
1,045.9 GFLOPS (1:64)
FP16 (TFLOPS)
—
66.94 TFLOPS (1:1)
AI/RT
RT Cores
—
110
Tensor Cores
—
440
Power
TDP
100 W
300 W
TDP (W)
100
300 +200.0%
Suggested PSU
—
700 W
Power Connectors
None
1x 16-pin
Architecture
Architecture
Kepler
Blackwell 2.0
GPU Name
GK104
GB202
Generation
Quadro Kepler-M (Kx000M)
Blackwell PRO W (x000)
Process Size
28 nm
5 nm
Transistors
3,540 million
92,200 million
Die Size
294 mm²
750 mm²
Foundry
TSMC
TSMC
Density
12.0M / mm²
122.9M / mm²
API Support
DirectX
12 (11_0)
12 Ultimate (12_2)
OpenGL
4.6
4.6
Vulkan
1.2.175
1.4
OpenCL
3.0
3.0
CUDA
3.0
12.0
Shader Model
6.5 (5.1)
6.9
Physical
Slot Width
MXM Module
Dual-slot
Length
—
267 mm 10.5 inches
Height
—
111 mm 4.4 inches
Outputs
Portable Device Dependent
4x DisplayPort 2.1b
Bus Interface
MXM-B (3.0)
PCIe 5.0 x16
Other
Production
End-of-life
Active
Predecessor
Quadro Fermi-M
Workstation Ada
Successor
Quadro Maxwell-M
—
View Quadro K4000M Details View RTX PRO 5000 72 GB Blackwell Details