AMD Radeon RX 6600 LE vs NVIDIA N1X 48SM Comparison
AMD Radeon RX 6600 LE
N1X 48SM
PERFORMANCE BENCHMARKS
Analysis: AMD Radeon RX 6600 LE vs NVIDIA N1X 48SM
Head-to-Head Benchmarks
The recorded database contains benchmark results for the AMD Radeon RX 6600 LE, while the NVIDIA N1X 48SM has no benchmark entries. The RX 6600 LE posts an average benchmark score of 70,829 across its two recorded tests. In Geekbench OpenCL, it scores 69,229, and in Geekbench Vulkan, it scores 72,428. The N1X 48SM currently has an average benchmark score of 0, with no individual test results logged, so direct head-to-head comparisons cannot be computed from measured data.
The RX 6600 LE ranks at the 91st percentile among all GPUs in the database. Its nearest rival, the AMD Radeon RX 6650M, records an average score of 71,768, which places the RX 6600 LE 1.3% behind that part. Against the NVIDIA RTX A3000 Mobile, which scores 70,140, the RX 6600 LE is 1% ahead. The NVIDIA Quadro P6000 scores 69,986, putting the RX 6600 LE 1.2% ahead of it. The AMD Radeon Pro WX 8200 scores 69,870, and the RX 6600 LE leads it by 1.4%.
These delta values show a tightly clustered competitive set. The RX 6600 LE sits within a 1.4% band of three rivals and trails one rival by 1.3%. Such narrow margins indicate that the RX 6600 LE delivers performance comparable to the mid-range mobile and workstation parts around it, rather than dominating or being dominated by any single competitor. The N1X 48SM, by contrast, has no measured scores and no nearest rivals listed, leaving its performance position unquantified in the database.
Architecture Differences
The two GPUs come from different manufacturers and entirely different design lineages. The AMD Radeon RX 6600 LE uses the Navi 23 chip built on RDNA 2.0 architecture, belonging to the Navi II generation (RX 6000 series). It is fabricated by TSMC on a 7 nm process. The NVIDIA N1X 48SM uses the GB20B chip built on Blackwell 2.0 architecture, belonging to the Blackwell IGP (N1x) generation, and it is also fabricated by TSMC but on a 5 nm process.
The RX 6600 LE packs 11,060 million transistors onto a 237 mm² die, yielding a transistor density of 46.7 million per square millimeter. The N1X 48SM has an unknown transistor count, but its die size is 382 mm², notably larger than the AMD part. No transistor density figure is recorded for the NVIDIA chip.
The RX 6600 LE is a discrete add-in board with a dual-slot form factor, a 1x 8-pin power connector, and a suggested power supply rating of 300 W. Its thermal design power is listed at 132 W. The N1X 48SM is an integrated graphics processor with an IGP slot width, no power connectors, and no recorded TDP or suggested PSU value. The AMD card measures 190 mm in length, 110 mm in height, and 40 mm in width. The NVIDIA part has no recorded dimensions.
The RX 6600 LE supports a full API stack: DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4. The N1X 48SM lists DirectX, OpenGL, and Vulkan all as N/A. The AMD card provides display outputs of 1x HDMI 2.1 and 3x DisplayPort 1.4a, while the N1X 48SM provides only 1x HDMI. The bus interfaces also differ: the RX 6600 LE uses PCIe 4.0 x8, whereas the N1X 48SM uses PCIe 5.0 x16.
Where Each One Wins
The RX 6600 LE wins in measured performance categories because it is the only one of the two with benchmark data. Its Geekbench Vulkan score of 72,428 exceeds its OpenCL score of 69,229, indicating that the card performs slightly better under the Vulkan API in the database's testing methodology. Its 91st percentile ranking places it above the median GPU in the database, while the N1X 48SM sits at the 50th percentile with a score of zero.
The RX 6600 LE also wins on feature completeness for general graphics workloads. It supports DirectX 12 Ultimate, OpenGL 4.6, and Vulkan 1.4, all of which are absent from the N1X 48SM's recorded API support. The AMD card has a higher pixel rate at 159.7 GPixel/s versus 112.6 GPixel/s for the NVIDIA part, and a higher memory bandwidth per its 224.0 GB/s figure compared to 273.2 GB/s for the N1X 48SM, although the NVIDIA part actually has the higher absolute bandwidth.
The N1X 48SM wins in raw compute specifications and memory capacity. It delivers 28.83 TFLOPS FP32 performance versus 8.942 TFLOPS for the RX 6600 LE, a more than threefold advantage. Its FP16 throughput is also 28.83 TFLOPS at a 1:1 ratio, while the AMD card achieves 17.88 TFLOPS FP16 at a 2:1 ratio. The NVIDIA part has 128 GB of LPDDR5X memory on a 256-bit bus, compared to 8 GB of GDDR6 on a 128-bit bus for the AMD card. Its texture rate of 900.9 GTexel/s far exceeds the 279.4 GTexel/s of the RX 6600 LE.
The N1X 48SM also has more shading units (6,144 versus 1,792), more TMUs (384 versus 112), more RT cores (48 versus 28), and includes 192 tensor cores, a feature entirely absent from the RX 6600 LE. Its 273.2 GB/s memory bandwidth is higher than the AMD card's 224.0 GB/s.
Specification Differences
The two parts differ across nearly every recorded specification field.
The RX 6600 LE runs at a base clock of 1626 MHz, a boost clock of 2495 MHz, and a game clock of 2045 MHz. Its memory clock is 1750 MHz with 14 Gbps effective data rate. The N1X 48SM has a base clock of 741 MHz and a boost clock of 2346 MHz, with no game clock recorded. Its memory clock is 1067 MHz with 8.5 Gbps effective.
Memory configuration diverges sharply. The AMD card uses 8 GB of GDDR6 on a 128-bit bus with 224.0 GB/s bandwidth. The NVIDIA part uses 128 GB of LPDDR5X on a 256-bit bus with 273.2 GB/s bandwidth.
Compute resources favor the NVIDIA part heavily. The RX 6600 LE has 1,792 shading units, 112 TMUs, 64 ROPs, and 28 RT cores. The N1X 48SM has 6,144 shading units, 384 TMUs, 48 ROPs, 48 RT cores, and 192 tensor cores. The AMD card has no tensor cores.
Pixel rate favors the AMD card at 159.7 GPixel/s versus 112.6 GPixel/s for the NVIDIA part. Texture rate favors the NVIDIA part at 900.9 GTexel/s versus 279.4 GTexel/s. FP32 throughput favors the NVIDIA part at 28.83 TFLOPS versus 8.942 TFLOPS. FP16 throughput favors the NVIDIA part at 28.83 TFLOPS versus 17.88 TFLOPS.
Process node and die size also differ: 7 nm and 237 mm² for the RX 6600 LE, 5 nm and 382 mm² for the N1X 48SM. The RX 6600 LE has 11,060 million transistors recorded; the N1X 48SM has an unknown transistor count.
Release dates differ by over two years. The RX 6600 LE was released on 2023-12-07, while the N1X 48SM has a release date of 2026-05-31.
FAQ
Q: Which GPU has a higher average benchmark score?
A: The AMD Radeon RX 6600 LE has an average benchmark score of 70,829, while the NVIDIA N1X 48SM has an average benchmark score of 0, with no recorded benchmark results.
Q: How does the RX 6600 LE compare to its nearest rivals in the database?
A: It is 1% ahead of the NVIDIA RTX A3000 Mobile, 1.2% ahead of the NVIDIA Quadro P6000, 1.4% ahead of the AMD Radeon Pro WX 8200, and 1.3% behind the AMD Radeon RX 6650M.
Q: What is the memory capacity difference between the two GPUs?
A: The RX 6600 LE has 8 GB of GDDR6 memory on a 128-bit bus, while the N1X 48SM has 128 GB of LPDDR5X memory on a 256-bit bus.
Q: Which GPU has higher FP32 compute throughput?
A: The N1X 48SM delivers 28.83 TFLOPS FP32, compared to 8.942 TFLOPS for the RX 6600 LE.
Q: Does the N1X 48SM support DirectX, OpenGL, or Vulkan?
A: No, all three APIs are recorded as N/A for the N1X 48SM, whereas the RX 6600 LE supports DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4.
Q: What are the process nodes for each GPU?
A: The RX 6600 LE is fabricated on a 7 nm process, and the N1X 48SM is fabricated on a 5 nm process, both by TSMC.
The Verdict
The database presents two GPUs at opposite ends of the measurement spectrum. The AMD Radeon RX 6600 LE is a fully characterized discrete graphics card with validated benchmark scores, a 91st percentile ranking, and a competitive position within 1.4% of three of its nearest rivals. It is the only part in this comparison with any recorded performance data, so any user requiring verified performance metrics from the database can only draw conclusions from the RX 6600 LE's results.
The NVIDIA N1X 48SM is a newer, larger integrated graphics processor with substantially higher raw compute specifications: 28.83 TFLOPS FP32, 6,144 shading units, 48 RT cores, 192 tensor cores, 128 GB of memory, and 273.2 GB/s of bandwidth. However, none of these specifications translate into measured benchmark scores in the database, and its API support is listed as unavailable. Its 50th percentile ranking reflects the absence of data rather than a measured performance level.
For users prioritizing verified benchmark results, the RX 6600 LE is the only option with recorded data. Its scores place it comfortably above the median GPU, and its narrow margins against rivals like the RTX A3000 Mobile and Quadro P6000 indicate stable, predictable performance. For users prioritizing raw specification sheets, the N1X 48SM offers dramatically higher compute, memory, and feature counts, but the database currently provides no evidence of how those specifications perform under actual testing. The choice hinges on whether measured results or theoretical specifications carry more weight.