AMD Radeon RX 7400 OEM vs NVIDIA N1X 40SM Comparison
AMD Radeon RX 7400 OEM
N1X 40SM
Analysis: AMD Radeon RX 7400 OEM vs NVIDIA N1X 40SM
Head-to-Head Benchmarks
The recorded data shows no direct head-to-head benchmark results between the AMD Radeon RX 7400 OEM and the NVIDIA N1X 40SM. Both entries carry an average benchmark score of 0, and each sits at the 50th percentile against all GPUs in the database. With no benchmark deltas or rival comparisons available, the analysis must rely entirely on the architectural and specification data recorded for each part.
Raw compute figures separate the two clearly. The NVIDIA N1X 40SM delivers 24.02 TFLOPS of FP32 throughput, compared to 7.885 TFLOPS for the AMD Radeon RX 7400 OEM. That puts the NVIDIA part at roughly three times the raw floating-point output. Texture rate tells a similar story: 750.7 GTexel/s for the N1X 40SM versus 123.2 GTexel/s for the RX 7400 OEM, a 6.1x advantage in texture filtering throughput. Pixel rate favors NVIDIA as well, with 93.84 GPixel/s against 70.40 GPixel/s, a 1.33x margin.
Memory capacity is the most dramatic divergence. The NVIDIA N1X 40SM carries 128 GB of LPDDR5X on a 256-bit bus, yielding 273.2 GB/s of bandwidth. The AMD card uses 8 GB of GDDR6 on a 128-bit bus, producing 172.8 GB/s. That is a 16x difference in capacity and roughly a 1.58x difference in bandwidth, both in NVIDIA's favor. Clock behavior also differs sharply: the RX 7400 OEM boosts to 1100 MHz from a 330 MHz base, while the N1X 40SM boosts to 2346 MHz from a 741 MHz base. The NVIDIA part's boost clock is more than double the AMD part's boost clock.
Architecture Differences
The two GPUs come from different foundries, process nodes, and architectural generations. AMD builds the RX 7400 OEM on TSMC's 6 nm process using the Navi 33 chip, which belongs to the RDNA 3.0 architecture under the codename "Hotpink Bonefish" and the Navi III (RX 7000) generation. The die measures 204 mm² and packs 13,300 million transistors, for a transistor density of 65.2M per mm². NVIDIA's N1X 40SM uses the GB20B chip on a 5 nm TSMC process, following the Blackwell 2.0 architecture within the Blackwell IGP (N1x) generation. Its die is 382 mm², nearly 1.87x larger than AMD's, though transistor count and density are not recorded.
Shader configuration separates the two substantially. The RX 7400 OEM has 1792 shading units, 112 TMUs, 64 ROPs, and 28 ray tracing cores, with no tensor cores listed. The N1X 40SM has 5120 shading units, 320 TMUs, 40 ROPs, 40 ray tracing cores, and 160 tensor cores. That means NVIDIA has 2.86x the shading units, 2.86x the TMUs, and 1.43x the ray tracing cores. AMD counterbalances with 1.6x the ROP count (64 versus 40), which helps explain why the pixel rate gap is smaller than the texture rate gap.
Memory technology differs at the fundamental level. AMD uses GDDR6 with a 128-bit bus and a memory clock of 1350 MHz, translating to 10.8 Gbps effective and 172.8 GB/s bandwidth. NVIDIA uses LPDDR5X with a 256-bit bus and a memory clock of 1067 MHz, translating to 8.5 Gbps effective and 273.2 GB/s bandwidth. Despite the lower effective data rate per pin, the wider bus gives NVIDIA the bandwidth advantage.
Power and physical design are also distinct. The RX 7400 OEM has a 55 W TDP, a single-slot cooler, and a single 6-pin power connector, with a suggested PSU of 250 W. The N1X 40SM is an IGP (integrated graphics processor) with no power connectors and an unknown TDP. The AMD card is a discrete board measuring 167 mm (6.6 inches) in length, while the NVIDIA part has no recorded dimensions. Bus interface differs as well: PCIe 4.0 x8 for AMD versus PCIe 5.0 x16 for NVIDIA, a two-generation and two-lane-width gap.
API support is a major differentiator. The RX 7400 OEM supports DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4. The N1X 40SM records N/A for DirectX, OpenGL, and Vulkan, which indicates its driver and software stack may not expose these conventional graphics APIs in the same manner. Display outputs also differ: AMD offers 1x HDMI 2.1a and 3x DisplayPort 2.1, while NVIDIA lists only 1x HDMI.
Where Each One Wins
The AMD Radeon RX 7400 OEM wins in categories tied to its ROP count and memory clock efficiency. Its 64 ROPs exceed NVIDIA's 40, and its pixel rate of 70.40 GPixel/s, while lower than NVIDIA's 93.84 GPixel/s, comes from a much smaller thermal envelope and a simpler power delivery setup. The 55 W TDP and single-slot design make it suited for compact systems that can supply a single 6-pin connector. The 8 GB GDDR6 frame buffer is conventional for discrete graphics workloads, and the API support for DirectX 12 Ultimate, OpenGL 4.6, and Vulkan 1.4 means it can engage with standard PC gaming and workstation software stacks.
The NVIDIA N1X 40SM wins on every major compute and memory metric recorded. Its 24.02 TFLOPS FP32 output is 3.05x the AMD part's 7.885 TFLOPS. Its 750.7 GTexel/s texture rate is 6.09x higher. Its 273.2 GB/s memory bandwidth is 1.58x higher, and its 128 GB capacity is 16x larger. The boost clock of 2346 MHz is 2.13x AMD's 1100 MHz boost. The 160 tensor cores give it dedicated hardware for matrix operations, which the AMD part lacks entirely. The PCIe 5.0 x16 interface doubles the lane count and advances the bus generation versus AMD's PCIe 4.0 x8.
The functional split is therefore straightforward. The AMD part is a low-power discrete GPU with broad API compatibility and a compact physical footprint. The NVIDIA part is a high-bandwidth, high-throughput IGP with enormous memory capacity and tensor hardware, but no recorded conventional graphics API support and unknown power requirements.
The Verdict
The data indicates two different product categories rather than direct competitors. The AMD Radeon RX 7400 OEM is a discrete, single-slot add-in card with a 55 W TDP, 8 GB GDDR6, and full support for DirectX 12 Ultimate, OpenGL 4.6, and Vulkan 1.4. It is designed for systems that need a standard PCIe graphics card with conventional API compatibility and modest power draw. Its release date of August 7, 2025 places it earlier in the database's timeline.
The NVIDIA N1X 40SM is an integrated graphics processor on the Blackwell 2.0 architecture with a 382 mm² die, 128 GB LPDDR5X, and 160 tensor cores. Its compute output is roughly three times AMD's FP32 figure, its texture rate is over six times higher, and its memory capacity is sixteen times larger. However, it records no DirectX, OpenGL, or Vulkan support, which limits its applicability to standard gaming or workstation API workloads. Its release date of May 31, 2026 is nearly ten months later.
From the recorded data, the RX 7400 OEM is the choice for a discrete GPU slot with known power limits, standard display outputs, and conventional graphics API coverage. The N1X 40SM is the choice for raw throughput, massive memory capacity, and tensor acceleration, provided the target workload does not require the traditional graphics APIs that the AMD part supports. Both sit at the 50th percentile against all GPUs, meaning the database places neither as an outlier in overall performance ranking.
FAQ
Q: Which GPU has higher FP32 compute performance?
A: The NVIDIA N1X 40SM records 24.02 TFLOPS of FP32, while the AMD Radeon RX 7400 OEM records 7.885 TFLOPS. That is roughly a 3.05x advantage for NVIDIA.
Q: How much memory does each GPU have?
A: The AMD Radeon RX 7400 OEM has 8 GB of GDDR6 on a 128-bit bus. The NVIDIA N1X 40SM has 128 GB of LPDDR5X on a 256-bit bus, which is 16 times the capacity.
Q: What are the process nodes for these two GPUs?
A: The AMD Radeon RX 7400 OEM uses TSMC's 6 nm process with the Navi 33 chip. The NVIDIA N1X 40SM uses TSMC's 5 nm process with the GB20B chip.
Q: Does the AMD part support DirectX and Vulkan?
A: Yes. The RX 7400 OEM lists DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4 support. The NVIDIA N1X 40SM records N/A for all three APIs.
Q: Which GPU has more ray tracing cores?
A: The NVIDIA N1X 40SM has 40 ray tracing cores. The AMD Radeon RX 7400 OEM has 28, so NVIDIA has 1.43x the ray tracing core count.
Q: What power connector does the AMD card require?
A: The RX 7400 OEM uses a single 6-pin power connector and has a 55 W TDP, with a suggested PSU of 250 W. The NVIDIA N1X 40SM is an IGP with no power connectors and an unknown TDP.