AMD Radeon RX 7400 OEM vs NVIDIA N1 16SM Comparison
AMD Radeon RX 7400 OEM
N1 16SM
Analysis: AMD Radeon RX 7400 OEM vs NVIDIA N1 16SM
The Verdict
The recorded data presents two fundamentally different products that share only a percentile ranking. Both the AMD Radeon RX 7400 OEM and the NVIDIA N1 16SM sit at the 50th percentile against all GPUs in the database, yet their physical designs, target platforms, and performance profiles diverge sharply. The RX 7400 OEM is a discrete, single-slot add-in board with a 55 W power envelope, a 6-pin power connector, and a 250 W suggested power supply. The N1 16SM is an integrated graphics processor (IGP) with no power connector, no slot width, and no suggested PSU figure. The data indicates these are not direct competitors; the RX 7400 OEM targets conventional desktop builds with upgrade paths, while the N1 16SM is designed for embedded or unified-memory platforms where the GPU shares a massive 128 GB memory pool.
Benchmark results show zero recorded wins for either product, and the average benchmark score is zero for both. This means the database contains no direct performance measurements for these two parts. What the data does show is a clear architectural split: the RX 7400 OEM leads in pixel throughput (70.40 GPixel/s vs 56.30 GPixel/s), while the N1 16SM leads decisively in texture rate (300.3 GTexel/s vs 123.2 GTexel/s) and FP32 compute (9.609 TFLOPS vs 7.885 TFLOPS). The N1 16SM also carries 64 tensor cores versus none on the RX 7400 OEM. For users who need raw compute, tensor acceleration, and massive memory capacity, the N1 16SM is the only choice. For users who need a standard PCIe slot card with conventional display outputs, the RX 7400 OEM is the only choice.
Architecture Differences
The two GPUs come from different architectural generations and process nodes. The AMD Radeon RX 7400 OEM uses the Navi 33 chip, built on RDNA 3.0 architecture, with the codename "Hotpink Bonefish." It belongs to the Navi III (RX 7000) generation and is fabricated on a 6 nm process at TSMC. The die measures 204 mm² and contains 13,300 million transistors, yielding a transistor density of 65.2 million per square millimeter. Its predecessor is Navi II, and its successor is Navi IV. The NVIDIA N1 16SM uses the GB20B chip, built on Blackwell 2.0 architecture, and belongs to the Blackwell IGP (N1x) generation. It is fabricated on a 5 nm process at TSMC, and the die measures 382 mm², though the transistor count is listed as unknown and the density is not recorded.
The RX 7400 OEM has 1,792 shading units, 112 texture mapping units, 64 ROPs, and 28 ray tracing cores. The N1 16SM has 2,048 shading units, 128 TMUs, only 24 ROPs, and 16 ray tracing cores. The N1 16SM also features 64 tensor cores, a capability the AMD part lacks entirely. The clock behavior differs significantly as well. The RX 7400 OEM runs at a base clock of 330 MHz and a boost clock of 1100 MHz, while the N1 16SM runs at 741 MHz base and 2346 MHz boost. Memory clocks also differ: the AMD part uses 1350 MHz (10.8 Gbps effective), while the NVIDIA part uses 1067 MHz (8.5 Gbps effective). The API support is another major split. The RX 7400 OEM supports DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4. The N1 16SM lists N/A for DirectX, OpenGL, and Vulkan, indicating that the database does not record standard graphics API compatibility for this part.
Where Each One Wins
The data shows a clean spatial separation of strengths. The AMD Radeon RX 7400 OEM wins in pixel fillrate, delivering 70.40 GPixel/s compared to 56.30 GPixel/s on the N1 16SM. This is a 25% advantage in pixel throughput, which typically benefits traditional rasterization workloads that fill large framebuffers at high resolutions. The RX 7400 OEM also has more ROPs (64 vs 24), which aligns with its pixel-rate lead. For conventional gaming or 2D rendering pipelines that rely on pixel output, the AMD part holds the advantage.
The NVIDIA N1 16SM wins in three key compute metrics. Its texture rate of 300.3 GTexel/s is more than double the AMD part's 123.2 GTexel/s, a 143% advantage. Its FP32 throughput of 9.609 TFLOPS exceeds the RX 7400 OEM's 7.885 TFLOPS by 21.9%. The N1 16SM also matches its FP16 rate at 9.609 TFLOPS (1:1), while the AMD part also lists FP16 at 7.885 TFLOPS (1:1). The N1 16SM's 64 tensor cores provide a capability absent on the RX 7400 OEM, which has none. Memory capacity is another decisive win for the NVIDIA part: 128 GB of LPDDR5X versus 8 GB of GDDR6. The memory bus is also wider on the N1 16SM (256 bit vs 128 bit), and its bandwidth of 273.2 GB/s exceeds the AMD part's 172.8 GB/s by 58%. The N1 16SM also uses a PCIe 5.0 x16 interface, while the RX 7400 OEM uses PCIe 4.0 x8. The RX 7400 OEM counters with more display outputs (1x HDMI 2.1a plus 3x DisplayPort 2.1 vs a single HDMI on the N1 16SM) and a conventional single-slot form factor with a 6-pin power connector.
FAQ
Q: Which GPU has higher raw compute throughput?
A: The NVIDIA N1 16SM delivers 9.609 TFLOPS of FP32 performance, while the AMD Radeon RX 7400 OEM delivers 7.885 TFLOPS. The N1 16SM leads by 21.9%.
Q: Which GPU supports more memory?
A: The NVIDIA N1 16SM supports 128 GB of LPDDR5X on a 256-bit bus with 273.2 GB/s bandwidth. The AMD Radeon RX 7400 OEM supports 8 GB of GDDR6 on a 128-bit bus with 172.8 GB/s bandwidth.
Q: Does either GPU have tensor cores?
A: The NVIDIA N1 16SM has 64 tensor cores. The AMD Radeon RX 7400 OEM has no tensor cores listed in the database.
Q: Which GPU has better pixel fillrate?
A: The AMD Radeon RX 7400 OEM has a pixel rate of 70.40 GPixel/s, which is 25% higher than the NVIDIA N1 16SM's 56.30 GPixel/s.
Q: What are the power requirements for each GPU?
A: The AMD Radeon RX 7400 OEM has a 55 W TDP, requires a 1x 6-pin power connector, and suggests a 250 W power supply. The NVIDIA N1 16SM has an unknown TDP, no power connectors, and no suggested PSU figure.
Q: Which GPU has better texture processing?
A: The NVIDIA N1 16SM has a texture rate of 300.3 GTexel/s, which is 143% higher than the AMD Radeon RX 7400 OEM's 123.2 GTexel/s.
Head-to-Head Benchmarks
The database records no direct head-to-head benchmark results between these two products. Both have zero benchmark entries, zero wins in the head-to-head comparison, and an average benchmark score of zero. The percentile ranking for both is exactly 50, meaning each sits at the median of all GPUs in the database, but this does not indicate parity in specific workloads. The absence of measured performance data means the comparison must rely on the architectural and specification differences recorded in the database.
The largest recorded advantage belongs to the N1 16SM in texture rate. At 300.3 GTexel/s, it more than doubles the RX 7400 OEM's 123.2 GTexel/s. This 177.1 GTexel/s gap suggests workloads that stress texture sampling, such as complex shader effects or procedural texturing, would favor the NVIDIA part substantially. The next biggest win for the N1 16SM is memory capacity: 128 GB versus 8 GB, a 16-fold difference. Bandwidth follows at 273.2 GB/s versus 172.8 GB/s, a 100.4 GB/s gap. FP32 compute shows a 1.724 TFLOPS advantage for the N1 16SM.
The RX 7400 OEM's largest recorded win is in pixel rate, where it leads by 14.10 GPixel/s (70.40 vs 56.30). It also leads in ROP count with 64 versus 24, and in display outputs with four connections versus one. The AMD part also has a higher memory clock at 1350 MHz versus 1067 MHz, though the effective bandwidth comparison favors the NVIDIA part due to the wider bus and faster memory type. The RX 7400 OEM's 55 W TDP is a recorded specification, but the N1 16SM's TDP is unknown, so no power efficiency comparison can be made from the data.
Specification Differences
The two products differ across nearly every recorded specification. The RX 7400 OEM uses a 6 nm process, while the N1 16SM uses 5 nm. Die size differs substantially: 204 mm² for the AMD part versus 382 mm² for the NVIDIA part. Transistor count is 13,300 million for the AMD part and unknown for the NVIDIA part. The RX 7400 OEM has a base clock of 330 MHz and a boost clock of 1100 MHz; the N1 16SM has a base clock of 741 MHz and a boost clock of 2346 MHz. Memory type differs: GDDR6 on the AMD part, LPDDR5X on the NVIDIA part. Memory size is 8 GB versus 128 GB. Bus width is 128 bit versus 256 bit. Bandwidth is 172.8 GB/s versus 273.2 GB/s.
The shading unit count is 1,792 on the RX 7400 OEM and 2,048 on the N1 16SM. TMU count is 112 versus 128. ROP count is 64 versus 24. Ray tracing cores are 28 versus 16. Tensor cores are absent on the AMD part and present at 64 on the NVIDIA part. Pixel rate favors AMD at 70.40 GPixel/s versus 56.30 GPixel/s. Texture rate favors NVIDIA at 300.3 GTexel/s versus 123.2 GTexel/s. FP32 and FP16 both favor NVIDIA at 9.609 TFLOPS versus 7.885 TFLOPS. The RX 7400 OEM has a 55 W TDP and a 250 W suggested PSU; the N1 16SM has neither recorded. The RX 7400 OEM is single-slot with a 6-pin connector; the N1 16SM is an IGP with no connectors. Bus interface is PCIe 4.0 x8 on the AMD part and PCIe 5.0 x16 on the NVIDIA part. Display outputs are 1x HDMI 2.1a and 3x DisplayPort 2.1 on the AMD part versus 1x HDMI on the NVIDIA part. API support is fully listed for the AMD part (DirectX 12 Ultimate, OpenGL 4.6, Vulkan 1.4) and entirely N/A for the NVIDIA part. Release dates differ: August 2025 for the RX 7400 OEM and May 2026 for the N1 16SM. The N1 16SM is marked as active in production; the RX 7400 OEM has no production status recorded.