NVIDIA L4 vs NVIDIA Tesla V100 SXM2 32 GB Comparison

NVIDIA
GEFORCE

NVIDIA L4

CORE STATE AD104
VRAM 24 GB
CLOCK SPEED 2040 MHz
TDP 72 W
BUS WIDTH 192 bit
ARCHITECTURE Ada Lovelace
nm
PROCESS 5 nm
LAUNCH DATE 2023
VS
NVIDIA
GEFORCE

Tesla V100 SXM2 32 GB

CORE STATE GV100
VRAM 32 GB
CLOCK SPEED 1530 MHz
TDP 250 W
BUS WIDTH 4096 bit
ARCHITECTURE Volta
nm
PROCESS 12 nm
LAUNCH DATE 2018

PERFORMANCE BENCHMARKS

geekbench_opencl
140,838
131,696
geekbench_vulkan
121,306
143,765

Analysis: NVIDIA L4 vs NVIDIA Tesla V100 SXM2 32 GB

The NVIDIA Tesla V100 SXM2 32 GB and the NVIDIA L4 represent two distinct generations of NVIDIA's accelerated computing lineup, separated by five years of architectural evolution. The V100 SXM2 32 GB, built on the Volta architecture and released in 2018, is a high-bandwidth compute module designed for the datacenter, while the L4, based on Ada Lovelace and released in 2023, is a low-power, single-slot server card. Benchmark data shows a split decision: the L4 wins in Geekbench OpenCL by 6.5%, while the V100 SXM2 32 GB wins in Geekbench Vulkan by 18.5%. This page analyzes their architectural differences, benchmark performance, and the specific workloads where each accelerator holds an advantage.

Where Each One Wins

The two accelerators win in different benchmark environments, reflecting their divergent design priorities. In the Geekbench OpenCL test, the NVIDIA L4 scores 140,838, outperforming the Tesla V100 SXM2 32 GB's 131,696 by 6.5%. This is a notable victory for the L4, especially given its dramatically lower power envelope. OpenCL workloads typically leverage raw shader throughput and general compute capabilities, where the L4's newer architecture and higher FP32 performance (30.29 TFLOPS vs 15.67 TFLOPS) provide a substantial edge. The L4's 7,424 shading units, compared to the V100's 5,120, also contribute to its OpenCL advantage.

Conversely, the Tesla V100 SXM2 32 GB dominates in Geekbench Vulkan, scoring 143,765 against the L4's 121,306, a massive 18.5% delta. Vulkan is a low-overhead API that often benefits from memory bandwidth and specific hardware optimizations. The V100's HBM2 memory system, with 898.0 GB/s of bandwidth and a 4096-bit bus, dramatically outperforms the L4's GDDR6 configuration, which offers 300.1 GB/s over a 192-bit bus. This nearly 3x memory bandwidth advantage explains the V100's Vulkan superiority. The V100's higher memory clock (877 MHz vs 1563 MHz) and wider bus allow it to feed data to its compute units far more efficiently in memory-intensive APIs like Vulkan.

The wins are split evenly, with each card claiming one benchmark category. For workloads that utilize OpenCL—often found in scientific computing, analytics, and certain rendering tasks—the L4 is the stronger choice. For Vulkan-based applications, which include many modern game engine workloads and graphics-heavy compute tasks, the V100 SXM2 32 GB maintains a clear edge. The L4's overall average benchmark score of 131,072 is 4.8% lower than the V100's 137,731, suggesting that while the L4 excels in specific OpenCL scenarios, the V100 has better all-around benchmark consistency, particularly in Vulkan.

Architecture Differences

The architectural gap between these two GPUs is substantial, spanning three major NVIDIA generations. The Tesla V100 SXM2 32 GB uses the GV100 chip on the Volta architecture, manufactured on TSMC's 12 nm process. It contains 21,100 million transistors on a massive 815 mm² die, yielding a transistor density of 25.9M per mm². In contrast, the L4 uses the AD104 chip on the Ada Lovelace architecture, built on TSMC's 5 nm process. The L4 packs 35,800 million transistors into a much smaller 294 mm² die, achieving a density of 121.8M per mm²—nearly 4.7 times higher than the V100. This density advantage is a direct result of the 5 nm process node.

Core configuration differs significantly. The V100 SXM2 32 GB has 5,120 shading units, 320 texture mapping units (TMUs), and 128 render output units (ROPs). It also features 640 tensor cores, a key Volta innovation for AI workloads. The L4, meanwhile, has 7,424 shading units, 240 TMUs, 80 ROPs, and 240 tensor cores. While the L4 has more shading units, it has fewer TMUs and ROPs. Critically, the L4 introduces 60 RT cores for hardware-accelerated ray tracing, a feature completely absent from the V100. The L4's FP32 throughput of 30.29 TFLOPS is 93% higher than the V100's 15.67 TFLOPS. FP16 performance reveals another key difference: the V100 delivers 31.33 TFLOPS at a 2:1 ratio, effectively doubling its FP32 rate, while the L4 delivers 30.29 TFLOPS at a 1:1 ratio, meaning no FP16 boost over FP32.

Memory architecture is fundamentally different. The V100 uses 32 GB of HBM2 with a 4096-bit bus, achieving 898.0 GB/s bandwidth. The L4 uses 24 GB of GDDR6 with a 192-bit bus, delivering 300.1 GB/s—a 66% reduction in bandwidth. Clock speeds also diverge: the V100 has a lower boost clock of 1530 MHz but a higher base clock of 1290 MHz, while the L4 has a 795 MHz base and a 2040 MHz boost. The L4's higher boost clock partially compensates for its narrower memory bus. The V100 is a 250 W SXM module requiring a 600 W suggested PSU, while the L4 is a single-slot card with a 72 W TDP and a 250 W suggested PSU—a 71% reduction in power consumption. The L4 also supports PCIe 4.0 x16, while the V100 is limited to PCIe 3.0 x16.

FAQ

Q: Which GPU is faster in OpenCL benchmarks?

A: The NVIDIA L4 scores 140,838 in Geekbench OpenCL, which is 6.5% higher than the Tesla V100 SXM2 32 GB's 131,696. This makes the L4 the better performer for OpenCL-based workloads.

Q: Why does the Tesla V100 SXM2 32 GB win in Vulkan benchmarks?

A: The V100 SXM2 32 GB scores 143,765 in Geekbench Vulkan, an 18.5% advantage over the L4's 121,306. The V100's 898.0 GB/s memory bandwidth from its HBM2 setup provides a major advantage in memory-intensive Vulkan tasks.

Q: What is the power consumption difference between the two cards?

A: The L4 has a 72 W TDP, while the V100 SXM2 32 GB has a 250 W TDP. The L4 also requires a 250 W suggested PSU compared to the V100's 600 W suggested PSU, making the L4 far more power-efficient.

Q: Which card has more memory and what type?

A: The V100 SXM2 32 GB has 32 GB of HBM2 memory, while the L4 has 24 GB of GDDR6. The V100 also has a much wider 4096-bit bus versus the L4's 192-bit bus.

Q: Does the L4 support ray tracing?

A: Yes, the L4 includes 60 RT cores for hardware-accelerated ray tracing. The V100 SXM2 32 GB has no RT cores, as ray tracing hardware was introduced in the later Turing generation.

Q: How do their average benchmark scores compare?

A: The V100 SXM2 32 GB has an average benchmark score of 137,731, which is 5.1% higher than the L4's average of 131,072. This reflects the V100's stronger Vulkan performance outweighing the L4's OpenCL lead.

Specification Differences

The two cards differ across nearly every major specification category. The V100 SXM2 32 GB uses the GV100 chip on Volta architecture at 12 nm, while the L4 uses AD104 on Ada Lovelace at 5 nm. Transistor counts favor the L4 with 35,800 million versus 21,100 million, but die size favors the V100 at 815 mm² versus 294 mm². Transistor density heavily favors the L4 at 121.8M per mm² versus 25.9M per mm². Clock speeds differ: the V100 has a 1290 MHz base and 1530 MHz boost, while the L4 has a 795 MHz base and 2040 MHz boost. Memory configurations are entirely different: 32 GB HBM2 with 4096-bit bus and 898.0 GB/s bandwidth for the V100 versus 24 GB GDDR6 with 192-bit bus and 300.1 GB/s for the L4.

Compute resources diverge significantly. The V100 has 5,120 shading units, 320 TMUs, 128 ROPs, and 640 tensor cores. The L4 has 7,424 shading units, 240 TMUs, 80 ROPs, and 240 tensor cores, plus 60 RT cores. FP32 performance favors the L4 at 30.29 TFLOPS versus 15.67 TFLOPS for the V100. FP16 performance is similar in absolute terms: 31.33 TFLOPS for the V100 and 30.29 TFLOPS for the L4, but the V100 achieves this at a 2:1 ratio while the L4 runs at 1:1. Pixel rate favors the V100 at 195.8 GPixel/s versus 163.2 GPixel/s, while texture rate is identical at 489.6 GTexel/s for both. Power requirements are dramatically different: 250 W TDP for the V100 versus 72 W for the L4. The V100 is an SXM module, while the L4 is a single-slot card measuring 169 mm in length and 56 mm in height.

Head-to-Head Benchmarks

The two available head-to-head benchmarks show a clear split in performance depending on the API used. In Geekbench OpenCL, the NVIDIA L4 decisively wins with a score of 140,838 compared to the Tesla V100 SXM2 32 GB's 131,696, representing a 6.5% delta in favor of the L4. This result is notable because the L4 achieves this victory while consuming only 72 W compared to the V100's 250 W, demonstrating the efficiency gains of the Ada Lovelace architecture. The L4's higher FP32 throughput of 30.29 TFLOPS and 2,304 additional shading units likely drive this OpenCL performance advantage. The L4's nearest rival, the NVIDIA GeForce RTX 3090 Ti, scores 131,938, which is 0.7% lower than the L4, placing the L4 in strong company within its performance tier.

In Geekbench Vulkan, the outcome reverses dramatically. The Tesla V100 SXM2 32 GB scores 143,765, outperforming the L4's 121,306 by a substantial 18.5% margin. This is the single largest performance delta between the two cards. The V100's HBM2 memory system, delivering 898.0 GB/s over a 4096-bit interface, is the most plausible explanation for this Vulkan dominance. Vulkan workloads often stress memory bandwidth, and the V100's nearly 3x bandwidth advantage over the L4's 300.1 GB/s GDDR6 configuration cannot be overcome by the L4's higher shading unit count. Interestingly, the V100's Vulkan score of 143,765 exceeds its OpenCL score of 131,696 by 9.2%, while the L4 shows the opposite trend, scoring 16.1% higher in OpenCL than in Vulkan.

The overall average benchmark scores reflect this split. The V100 SXM2 32 GB averages 137,731 across the two tests, placing it in the 96th percentile of all GPUs. Its nearest rival, the AMD Instinct MI100, scores 139,035, which is 0.9% higher. The L4 averages 131,072, placing it in the 95th percentile, with its nearest rival being the NVIDIA GeForce RTX 3090 Ti at 131,938, which is 0.7% higher. The V100's higher average score and percentile ranking suggest that its Vulkan advantage outweighs the L4's OpenCL lead in overall benchmark terms. For users whose workloads are Vulkan-centric, the V100 SXM2 32 GB is clearly superior; for OpenCL-centric tasks, the L4 offers better performance with a fraction of the power draw.

DETAILED SPECIFICATIONS

SPECIFICATION
L4
Tesla V100 SXM2 32 GB
Core Specs
Shading Units
7,424
5,120 -31.0%
Shaders
7,424
5,120 -31.0%
TMUs
240
320 +33.3%
ROPs
80
128 +60.0%
SM Count
60
80 +33.3%
Clocks
Base Clock
795 MHz
1290 MHz
Boost Clock
2040 MHz
1530 MHz
Memory Clock
1563 MHz 12.5 Gbps effective
877 MHz 1754 Mbps effective
Memory
Memory Size
24 GB
32 GB
VRAM (MB)
24,576
32,768 +33.3%
Memory Type
GDDR6
HBM2
Memory Bus
192 bit
4096 bit
Bandwidth
300.1 GB/s
898.0 GB/s
Cache
L1 Cache
128 KB (per SM)
128 KB (per SM)
L2 Cache
48 MB
6 MB
Performance
Pixel Rate
163.2 GPixel/s
195.8 GPixel/s
Texture Rate
489.6 GTexel/s
489.6 GTexel/s
FP32 (TFLOPS)
30.29 TFLOPS
15.67 TFLOPS
FP64 (TFLOPS)
473.3 GFLOPS (1:64)
7.834 TFLOPS (1:2)
FP16 (TFLOPS)
30.29 TFLOPS (1:1)
31.33 TFLOPS (2:1)
AI/RT
RT Cores
60
—
Tensor Cores
240
640 +166.7%
Power
TDP
72 W
250 W
TDP (W)
72
250 +247.2%
Suggested PSU
250 W
600 W
Power Connectors
None
None
Architecture
Architecture
Ada Lovelace
Volta
GPU Name
AD104
GV100
Generation
Server Ada (Lxx)
Tesla Volta (Vxx)
Process Size
5 nm
12 nm
Transistors
35,800 million
21,100 million
Die Size
294 mm²
815 mm²
Foundry
TSMC
TSMC
Density
121.8M / mm²
25.9M / mm²
API Support
DirectX
12 Ultimate (12_2)
12 (12_1)
OpenGL
4.6
4.6
Vulkan
1.4
1.4
OpenCL
3.0
3.0
CUDA
8.9
7.0
Shader Model
6.8
6.8
Physical
Slot Width
Single-slot
SXM Module
Length
169 mm 6.7 inches
—
Height
56 mm 2.2 inches
—
Outputs
No outputs
No outputs
Bus Interface
PCIe 4.0 x16
PCIe 3.0 x16
Other
Production
Active
End-of-life
Predecessor
Server Ampere
Tesla Pascal
Successor
Server Hopper
Tesla Turing
View L4 Details View Tesla V100 SXM2 32 GB Details