NVIDIA GeForce RTX 5060 Ti 8 GB vs NVIDIA Quadro M3000M Comparison

NVIDIA
GEFORCE

NVIDIA GeForce RTX 5060 Ti 8 GB

CORE STATE GB206
VRAM 8 GB
CLOCK SPEED 2572 MHz
TDP 180 W
BUS WIDTH 128 bit
ARCHITECTURE Blackwell 2.0
nm
PROCESS 5 nm
LAUNCH DATE 2025
VS
NVIDIA
GEFORCE

Quadro M3000M

CORE STATE GM204
VRAM 4 GB
CLOCK SPEED 924 MHz
TDP 75 W
BUS WIDTH 256 bit
ARCHITECTURE Maxwell 2.0
nm
PROCESS 28 nm
LAUNCH DATE 2015

PERFORMANCE BENCHMARKS

3dmark_3dmark_steel_nomad_dx12
4,019
N/A
passmark_directx_10
142
26
passmark_directx_11
220
42
passmark_directx_12
82
23
passmark_directx_9
228
98
passmark_g2d
1,169
402
passmark_g3d
21,981
5,543
passmark_gpu_compute
11,365
2,139
geekbench_opencl
N/A
16,646
geekbench_vulkan
N/A
16,668

Analysis: NVIDIA GeForce RTX 5060 Ti 8 GB vs NVIDIA Quadro M3000M

The NVIDIA GeForce RTX 5060 Ti 8 GB and the NVIDIA Quadro M3000M represent two vastly different eras of GPU design, separated by a decade of architectural evolution. The benchmark data shows a decisive performance gap, with the newer GeForce card winning all seven head-to-head tests, often by margins exceeding 400%. This analysis breaks down exactly where the modern card excels, what the older Quadro still offers, and who should consider each based strictly on the measured results.

Head-to-Head Benchmarks

The RTX 5060 Ti 8 GB dominates every single benchmark in the comparison, with no wins recorded for the Quadro M3000M. The largest margin comes in the Passmark DirectX 10 test, where the GeForce scores 142 against the Quadro’s 26, a delta of 446.2%. That is more than a five-fold advantage in raw throughput for that legacy API workload. Similarly, the DirectX 11 test shows the RTX 5060 Ti at 220 versus 42, a 423.8% delta, indicating that even older DirectX titles run dramatically better on the newer architecture.

The gap narrows somewhat in DirectX 12, where the GeForce posts 82 against the Quadro’s 23, a 256.5% delta. While still a massive win, this smaller percentage suggests the Maxwell card’s limited DirectX 12 feature set holds up better relative to its own baseline in that API. The DirectX 9 test shows a 132.7% delta (228 vs 98), the closest result in the entire comparison, though still a clear victory for the RTX 5060 Ti.

The most significant absolute difference appears in the Passmark G3D test, the general gaming and 3D graphics score. Here the RTX 5060 Ti hits 21,981, while the Quadro M3000M manages only 5,543. That is a 296.6% delta, meaning the GeForce delivers nearly four times the 3D rendering performance. The compute-oriented Passmark GPU Compute test tells a similar story: 11,365 versus 2,139, a 431.3% delta. This indicates the RTX 5060 Ti’s advantage extends beyond graphics into general-purpose parallel processing. Even the 2D test (Passmark G2D) shows a 190.8% delta (1,169 vs 402), which is notable because 2D performance is often less dependent on raw compute power.

When comparing average benchmark scores, the RTX 5060 Ti sits at 4,901, while the Quadro M3000M averages 4,621. The GeForce’s nearest rival is the AMD FirePro W5130M with an average score of 4,904, a delta of -0.1%, meaning the RTX 5060 Ti is effectively tied with that competitor in aggregate. The Quadro’s closest rival is the NVIDIA GeForce GTX 970M at 4,628, again a delta of -0.1%. This places both cards in similar percentile territory — the RTX 5060 Ti at the 29th percentile of all GPUs and the Quadro at the 27th — which shows that while the RTX 5060 Ti is far faster in direct comparison, neither card is a top-tier performer in the broader market.

Architecture Differences

The fundamental gap stems from a decade of process and design improvements. The RTX 5060 Ti uses the GB206 chip built on TSMC’s 5 nm process, housing 21,900 million transistors on a 181 mm² die. That yields a transistor density of 121.0 million per square millimeter. The Quadro M3000M, by contrast, uses the GM204 chip on TSMC’s 28 nm process, with 5,200 million transistors spread across a much larger 398 mm² die, giving a density of just 13.1 million per square millimeter. The newer card packs over four times the transistors into less than half the silicon area.

Clock speeds reflect this efficiency leap. The RTX 5060 Ti runs at a base of 2,407 MHz and boosts to 2,572 MHz, while the Quadro M3000M operates at a base of 823 MHz with a 924 MHz boost. That is nearly a three-fold difference in raw clock rate, which compounds with the architectural improvements. The memory subsystem also diverges sharply: the GeForce uses 8 GB of GDDR7 on a 128-bit bus, delivering 448.0 GB/s of bandwidth, whereas the Quadro uses 4 GB of GDDR5 on a wider 256-bit bus, achieving only 160.4 GB/s. The newer card’s narrower bus is more than compensated by the faster memory technology.

Feature support shows the generational split. The RTX 5060 Ti includes 36 ray tracing cores and 144 tensor cores, neither of which exists on the Quadro M3000M. The GeForce also supports DirectX 12 Ultimate (12_2), while the Quadro is limited to DirectX 12 (12_1). Both cards support OpenGL 4.6 and Vulkan 1.4, so API compatibility is not a differentiator. The shading unit count is 4,608 on the RTX 5060 Ti versus 1,024 on the Quadro, with 144 texture mapping units against 64, and 48 render output units against 32.

Pixel and texture rates tell the performance story concisely: the GeForce achieves 123.5 GPixel/s and 370.4 GTexel/s, while the Quadro manages 29.57 GPixel/s and 59.14 GTexel/s. FP32 compute is 23.70 TFLOPS on the RTX 5060 Ti versus 1.892 TFLOPS on the Quadro, a 12.5-fold difference. The modern card also supports FP16 at a 1:1 ratio (23.70 TFLOPS), while the Quadro has no listed FP16 capability.

Where Each One Wins

The RTX 5060 Ti wins everywhere in this comparison, but the margin varies by workload. Its strongest relative performance comes in DirectX 10 and DirectX 11, where the deltas exceed 420%. This suggests it is an excellent choice for legacy game libraries and older software that never received DirectX 12 patches. The smallest win is in DirectX 9, at 132.7%, which is still substantial but indicates that very old titles may not fully utilize the modern card’s architecture.

For 3D rendering and general graphics work, the Passmark G3D score of 21,981 versus 5,543 makes the RTX 5060 Ti the clear pick for any GPU-accelerated content creation, CAD viewport work, or modern gaming. The compute score of 11,365 versus 2,139 reinforces this for tasks like video encoding, physics simulations, or machine learning inference that leverage tensor cores. The 2D score advantage (1,169 vs 402) means even desktop compositing and image editing feel snappier on the GeForce.

The Quadro M3000M has no benchmark wins, but its profile suggests one use case: any system that already has it installed and requires only basic 3D acceleration. Its 75 W TDP and MXM module form factor mean it fits in laptops where the 180 W RTX 5060 Ti with a dual-slot cooler and 1x 8-pin power connector cannot. The Quadro also uses a PCIe 3.0 x16 interface, whereas the GeForce uses PCIe 5.0 x8, so the Quadro is compatible with older motherboards that lack PCIe 4.0 or 5.0 slots.

FAQ

Q: Is the RTX 5060 Ti faster than the Quadro M3000M in every test?

A: Yes. The RTX 5060 Ti wins all seven head-to-head benchmarks, with deltas ranging from 132.7% in DirectX 9 to 446.2% in DirectX 10.

Q: How much more compute power does the RTX 5060 Ti have?

A: The RTX 5060 Ti delivers 23.70 TFLOPS of FP32 compute versus 1.892 TFLOPS on the Quadro M3000M. The Passmark GPU Compute score difference is 11,365 versus 2,139, a 431.3% delta.

Q: Which card has more memory bandwidth?

A: The RTX 5060 Ti has 448.0 GB/s of bandwidth from 8 GB of GDDR7 on a 128-bit bus. The Quadro M3000M has 160.4 GB/s from 4 GB of GDDR5 on a 256-bit bus.

Q: Does the Quadro M3000M support ray tracing?

A: No. The Quadro M3000M has no ray tracing cores or tensor cores. The RTX 5060 Ti includes 36 RT cores and 144 tensor cores.

Q: What is the process node difference?

A: The RTX 5060 Ti uses a 5 nm process with 21,900 million transistors on a 181 mm² die. The Quadro M3000M uses a 28 nm process with 5,200 million transistors on a 398 mm² die.

Q: Which card is better for DirectX 12 gaming?

A: The RTX 5060 Ti scores 82 in the Passmark DirectX 12 test versus 23 for the Quadro, a 256.5% delta. The GeForce also supports DirectX 12 Ultimate (12_2), while the Quadro is limited to 12_1.

Specification Differences

The two cards differ in nearly every measurable specification. The RTX 5060 Ti uses the GB206 chip on a 5 nm process, while the Quadro M3000M uses GM204 on 28 nm. Transistor count is 21,900 million versus 5,200 million, and die size is 181 mm² versus 398 mm². Clock speeds are 2407/2572 MHz base/boost for the GeForce against 823/924 MHz for the Quadro. Memory is 8 GB GDDR7 on a 128-bit bus (448.0 GB/s) versus 4 GB GDDR5 on a 256-bit bus (160.4 GB/s).

The RTX 5060 Ti has 4,608 shading units, 144 TMUs, 48 ROPs, 36 RT cores, and 144 tensor cores. The Quadro has 1,024 shading units, 64 TMUs, and 32 ROPs, with no RT or tensor cores. Pixel rate is 123.5 GPixel/s versus 29.57 GPixel/s, texture rate is 370.4 GTexel/s versus 59.14 GTexel/s, and FP32 is 23.70 TFLOPS versus 1.892 TFLOPS. The GeForce supports FP16 at 23.70 TFLOPS, while the Quadro has no FP16 rating.

Power and form factor differ substantially: the RTX 5060 Ti draws 180 W, requires a 450 W PSU, uses a dual-slot cooler with a 1x 8-pin connector, and measures 241 mm by 111 mm by 40 mm. The Quadro M3000M draws 75 W, uses an MXM module with no power connectors, and has no listed dimensions. Bus interface is PCIe 5.0 x8 for the GeForce and PCIe 3.0 x16 for the Quadro. Display outputs are 1x HDMI 2.1b and 3x DisplayPort 2.1b on the GeForce, versus "Portable Device Dependent" on the Quadro. The RTX 5060 Ti supports DirectX 12 Ultimate (12_2), while the Quadro supports DirectX 12 (12_1). Both support OpenGL 4.6 and Vulkan 1.4. The GeForce was released on 2025-04-15 and has a launch MSRP of 379 USD, while the Quadro was released on 2015-08-17 and is end-of-life.

The Verdict

The data leaves no ambiguity: the RTX 5060 Ti 8 GB is the superior GPU by every measured metric. It wins all seven benchmarks, offers over 12 times the FP32 compute, provides 2.8 times the memory bandwidth, and supports modern features like ray tracing and tensor cores that the Quadro M3000M lacks entirely. Anyone choosing between these two for a new build should select the RTX 5060 Ti without hesitation.

The Quadro M3000M’s only advantages are its 75 W power draw and MXM form factor, which make it suitable for legacy laptops that cannot accommodate a 180 W dual-slot card. Its PCIe 3.0 x16 interface also works in older systems, but the performance penalty is severe — the Passmark G3D score is 5,543 versus 21,981, meaning the Quadro delivers roughly one-quarter of the 3D performance. The percentile rankings (27th versus 29th) are close, but that reflects the broader GPU market where both cards sit in the lower half. For any task that benefits from GPU acceleration — gaming, rendering, compute, or even 2D desktop work — the RTX 5060 Ti is the only rational choice based on the benchmark evidence.

DETAILED SPECIFICATIONS

SPECIFICATION
RTX 5060 Ti 8 GB
Quadro M3000M
Core Specs
Shading Units
4,608
1,024 -77.8%
Shaders
4,608
1,024 -77.8%
TMUs
144
64 -55.6%
ROPs
48
32 -33.3%
SM Count
36
—
Clocks
Base Clock
2407 MHz
823 MHz
Boost Clock
2572 MHz
924 MHz
Memory Clock
1750 MHz 28 Gbps effective
1253 MHz 5 Gbps effective
Memory
Memory Size
8 GB
4 GB
VRAM (MB)
8,192
4,096 -50.0%
Memory Type
GDDR7
GDDR5
Memory Bus
128 bit
256 bit
Bandwidth
448.0 GB/s
160.4 GB/s
Cache
L1 Cache
128 KB (per SM)
48 KB (per SMM)
L2 Cache
32 MB
2 MB
Performance
Pixel Rate
123.5 GPixel/s
29.57 GPixel/s
Texture Rate
370.4 GTexel/s
59.14 GTexel/s
FP32 (TFLOPS)
23.70 TFLOPS
1.892 TFLOPS
FP64 (TFLOPS)
370.4 GFLOPS (1:64)
59.14 GFLOPS (1:32)
FP16 (TFLOPS)
23.70 TFLOPS (1:1)
—
AI/RT
RT Cores
36
—
Tensor Cores
144
—
Power
TDP
180 W
75 W
TDP (W)
180
75 -58.3%
Suggested PSU
450 W
—
Power Connectors
1x 8-pin
None
Architecture
Architecture
Blackwell 2.0
Maxwell 2.0
GPU Name
GB206
GM204
Generation
GeForce 50
Quadro Maxwell-M (Mx000M)
Process Size
5 nm
28 nm
Transistors
21,900 million
5,200 million
Die Size
181 mm²
398 mm²
Foundry
TSMC
TSMC
Density
121.0M / mm²
13.1M / mm²
API Support
DirectX
12 Ultimate (12_2)
12 (12_1)
OpenGL
4.6
4.6
Vulkan
1.4
1.4
OpenCL
3.0
3.0
CUDA
12.0
5.2
Shader Model
6.9
6.8
Physical
Slot Width
Dual-slot
MXM Module
Length
241 mm 9.5 inches
—
Height
111 mm 4.4 inches
—
Outputs
1x HDMI 2.1b3x DisplayPort 2.1b
Portable Device Dependent
Bus Interface
PCIe 5.0 x8
PCIe 3.0 x16
Other
Launch Price
379 USD
—
Production
Active
End-of-life
Predecessor
GeForce 40
Quadro Kepler-M
Successor
GeForce 60
Quadro Pascal-M
View GeForce RTX 5060 Ti 8 GB Details View Quadro M3000M Details