NVIDIA GeForce RTX 5060 Ti 8 GB vs NVIDIA Quadro K3100M Comparison

NVIDIA
GEFORCE

NVIDIA GeForce RTX 5060 Ti 8 GB

CORE STATE GB206
VRAM 8 GB
CLOCK SPEED 2572 MHz
TDP 180 W
BUS WIDTH 128 bit
ARCHITECTURE Blackwell 2.0
nm
PROCESS 5 nm
LAUNCH DATE 2025
VS
NVIDIA
GEFORCE

Quadro K3100M

CORE STATE GK104
VRAM 4 GB
CLOCK SPEED 706 MHz
TDP 75 W
BUS WIDTH 256 bit
ARCHITECTURE Kepler
nm
PROCESS 28 nm
LAUNCH DATE 2013

PERFORMANCE BENCHMARKS

3dmark_3dmark_steel_nomad_dx12
4,019
N/A
passmark_directx_10
142
N/A
passmark_directx_11
220
N/A
passmark_directx_12
82
N/A
passmark_directx_9
228
N/A
passmark_g2d
1,169
N/A
passmark_g3d
21,981
N/A
passmark_gpu_compute
11,365
N/A
geekbench_metal
N/A
3,823
geekbench_opencl
N/A
6,154
geekbench_vulkan
N/A
5,484

Analysis: NVIDIA GeForce RTX 5060 Ti 8 GB vs NVIDIA Quadro K3100M

The NVIDIA Quadro K3100M and the NVIDIA GeForce RTX 5060 Ti 8 GB represent two vastly different eras of GPU design, separated by over a decade of architectural evolution. The data shows a stark generational divide: the Quadro K3100M, a Kepler-based mobile workstation part from 2013, achieves an average benchmark score of 5154, while the RTX 5060 Ti, a Blackwell 2.0 desktop part from 2025, posts an average of 4901. These averages, however, are misleading due to the distinct benchmark suites each card was tested with. The RTX 5060 Ti’s score is dragged down by legacy DirectX 9 and 10 tests, whereas its modern workload scores are dramatically higher. The K3100M’s percentile ranking of 30 versus the RTX 5060 Ti’s 29 places them in a similar overall position, but the underlying performance characteristics tell a completely different story.

Head-to-Head Benchmarks

Direct comparison is complicated by the lack of overlapping test suites in the data. The Quadro K3100M was evaluated using Geekbench’s compute APIs, while the RTX 5060 Ti was assessed with 3DMark and Passmark suites. However, the available numbers reveal the RTX 5060 Ti’s overwhelming dominance in modern compute and graphics workloads.

The most striking disparity appears in raw compute throughput. The RTX 5060 Ti delivers 23.70 TFLOPS of FP32 performance, a figure that is over 21 times higher than the K3100M’s 1,084.4 GFLOPS. This translates directly to the Passmark G3D score of 21981 for the RTX 5060 Ti, which is the strongest single result in its dataset. The K3100M has no comparable DirectX-based score, but its Geekbench OpenCL result of 6154 and Vulkan score of 5484 indicate a much lower ceiling for parallel processing.

Memory bandwidth is another area of decisive victory. The RTX 5060 Ti’s GDDR7 memory provides 448.0 GB/s of bandwidth, compared to the K3100M’s 102.4 GB/s from GDDR5. This 4.4x advantage is critical for texture-heavy workloads and high-resolution rendering. The RTX 5060 Ti also leads in fill rates, with a pixel rate of 123.5 GPixel/s versus 11.30 GPixel/s, and a texture rate of 370.4 GTexel/s versus 45.18 GTexel/s.

The RTX 5060 Ti’s Passmark scores show a clear hierarchy across API generations: DirectX 11 yields 220 points, DirectX 10 yields 142, and DirectX 12 yields 82. Its DirectX 9 score of 228 is the highest among the legacy tests, which is an unusual pattern suggesting driver optimizations for older titles. The Passmark G2D score of 1169 indicates strong 2D performance, while the GPU compute score of 11365 reinforces its compute prowess.

The K3100M’s benchmark suite is limited to three Geekbench tests, with its best result being 6154 in OpenCL. Its Vulkan score of 5484 and Metal score of 3823 show a consistent but modest level of performance. There are no head-to-head benchmark entries in the data, meaning the two cards were never tested with the same workload. This absence of direct comparison data means all conclusions must be drawn from the relative strengths shown in their respective suites.

Architecture Differences

The architectural gulf between these two GPUs is immense. The K3100M uses the GK104 chip built on a 28 nm process at TSMC, featuring 3,540 million transistors on a 294 mm² die. This yields a transistor density of 12.0 million per mm². The RTX 5060 Ti uses the GB206 chip on a 5 nm process, also from TSMC, packing 21,900 million transistors into a much smaller 181 mm² die. Its transistor density of 121.0M per mm² is roughly ten times higher, a direct result of the process node advancement.

The K3100M is based on the Kepler architecture, which lacks dedicated ray tracing and tensor cores. It provides 768 shading units, 64 texture mapping units, and 32 ROPs. The RTX 5060 Ti, built on Blackwell 2.0, includes 4,608 shading units, 144 TMUs, and 48 ROPs, along with 36 dedicated ray tracing cores and 144 tensor cores. These specialized units enable hardware-accelerated ray tracing and AI-driven features like DLSS, which the Kepler part cannot perform.

Clock speeds have also scaled dramatically. The K3100M runs at a fixed 706 MHz for both base and boost, while the RTX 5060 Ti has a base clock of 2407 MHz and a boost clock of 2572 MHz. Memory technology has evolved from GDDR5 at 3.2 Gbps effective to GDDR7 at 28 Gbps effective. The bus width has halved from 256-bit to 128-bit, but the much higher memory clock more than compensates, resulting in the bandwidth advantage noted earlier.

API support is a clear differentiator. The K3100M supports DirectX 12 (11_0), OpenGL 4.6, and Vulkan 1.2.175. The RTX 5060 Ti supports DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4. The newer card’s DirectX 12 Ultimate feature set includes hardware ray tracing, mesh shaders, and variable rate shading, none of which are available on the older architecture.

FAQ

Q: Which GPU has higher raw FP32 compute performance?

A: The RTX 5060 Ti is overwhelmingly faster, delivering 23.70 TFLOPS compared to the K3100M’s 1,084.4 GFLOPS. This represents a more than 20-fold increase in single-precision floating-point throughput.

Q: How do the memory systems compare?

A: The RTX 5060 Ti uses 8 GB of GDDR7 memory with a 128-bit bus and 448.0 GB/s bandwidth. The K3100M has 4 GB of GDDR5 on a 256-bit bus with 102.4 GB/s bandwidth. The newer card provides over four times the bandwidth despite a narrower bus.

Q: What are the power requirements for each card?

A: The K3100M has a TDP of 75 W and uses no external power connectors, drawing power directly from the MXM slot. The RTX 5060 Ti has a TDP of 180 W and requires one 8-pin power connector, with a suggested power supply rating of 450 W.

Q: Do both cards support modern APIs like Vulkan and DirectX 12?

A: Yes, but with different feature levels. Both support OpenGL 4.6. The K3100M supports Vulkan 1.2.175 and DirectX 12 (11_0). The RTX 5060 Ti supports Vulkan 1.4 and DirectX 12 Ultimate (12_2), which includes advanced features like ray tracing.

Q: Which card has better ray tracing capabilities?

A: The RTX 5060 Ti is the only one with dedicated hardware, featuring 36 ray tracing cores. The K3100M has no ray tracing cores, meaning any ray tracing would have to be done in software, which is not practical for real-time workloads.

Q: How do the physical dimensions differ?

A: The K3100M is an MXM module with a bus interface of MXM-B (3.0), designed for laptops. The RTX 5060 Ti is a dual-slot desktop card measuring 241 mm in length, 111 mm in height, and 40 mm in width, using a PCIe 5.0 x8 interface.

Specification Differences

| Specification | NVIDIA Quadro K3100M | NVIDIA GeForce RTX 5060 Ti 8 GB |

|---|---|---|

| Architecture | Kepler | Blackwell 2.0 |

| Process Node | 28 nm | 5 nm |

| Transistors | 3,540 million | 21,900 million |

| Die Size | 294 mm² | 181 mm² |

| Transistor Density | 12.0M / mm² | 121.0M / mm² |

| Base Clock | 706 MHz | 2407 MHz |

| Boost Clock | 706 MHz | 2572 MHz |

| Memory Clock | 3.2 Gbps effective | 28 Gbps effective |

| Memory Size | 4 GB | 8 GB |

| Memory Type | GDDR5 | GDDR7 |

| Memory Bus Width | 256 bit | 128 bit |

| Memory Bandwidth | 102.4 GB/s | 448.0 GB/s |

| Shading Units | 768 | 4608 |

| TMUs | 64 | 144 |

| ROPs | 32 | 48 |

| Ray Tracing Cores | None | 36 |

| Tensor Cores | None | 144 |

| Pixel Rate | 11.30 GPixel/s | 123.5 GPixel/s |

| Texture Rate | 45.18 GTexel/s | 370.4 GTexel/s |

| FP32 Performance | 1,084.4 GFLOPS | 23.70 TFLOPS |

| FP16 Performance | None | 23.70 TFLOPS (1:1) |

| TDP | 75 W | 180 W |

| Slot Width | MXM Module | Dual-slot |

| Power Connectors | None | 1x 8-pin |

| Suggested PSU | None | 450 W |

| Bus Interface | MXM-B (3.0) | PCIe 5.0 x8 |

| Display Outputs | Portable Device Dependent | 1x HDMI 2.1b, 3x DisplayPort 2.1b |

| DirectX Support | 12 (11_0) | 12 Ultimate (12_2) |

| Vulkan Support | 1.2.175 | 1.4 |

| Production Status | End-of-life | Active |

| Release Date | 2013-07-22 | 2025-04-15 |

| Launch MSRP | None | 379 USD |

Where Each One Wins

The RTX 5060 Ti wins in every measurable performance category. Its FP32 compute is over 20 times higher, its memory bandwidth is over four times higher, and its pixel and texture rates are roughly ten times higher. The Passmark G3D score of 21981 is the standout result, indicating exceptional rasterization performance for modern games and 3D applications. The GPU compute score of 11365 further solidifies its position for general-purpose compute workloads. The inclusion of 36 ray tracing cores and 144 tensor cores makes it the only viable option for ray-traced gaming, AI inference, and DLSS upscaling. Its 8 GB of GDDR7 memory and support for DirectX 12 Ultimate and Vulkan 1.4 ensure compatibility with the latest software standards. The card’s dimensions of 241 mm by 111 mm by 40 mm make it a standard dual-slot desktop component.

The K3100M’s advantages are confined to legacy contexts and power efficiency. Its 75 W TDP is less than half of the RTX 5060 Ti’s 180 W, making it suitable for thin-and-light mobile workstations where thermal headroom is limited. Its MXM-B (3.0) form factor is designed for laptop integration, whereas the RTX 5060 Ti is a desktop-only card. In its Geekbench tests, the K3100M scores 6154 in OpenCL, 5484 in Vulkan, and 3823 in Metal, which are respectable numbers for a 2013 mobile part but pale in comparison to modern standards. The card’s 4 GB of GDDR5 memory may be sufficient for older professional workloads that do not demand high bandwidth. For users running legacy software that predates DirectX 12 Ultimate or requiring a low-power mobile solution, the K3100M remains functional, but it cannot compete with the RTX 5060 Ti in any performance metric. The data shows the RTX 5060 Ti is the clear choice for any current or future workload.

DETAILED SPECIFICATIONS

SPECIFICATION
RTX 5060 Ti 8 GB
Quadro K3100M
Core Specs
Shading Units
4,608
768 -83.3%
Shaders
4,608
768 -83.3%
TMUs
144
64 -55.6%
ROPs
48
32 -33.3%
SM Count
36
—
Clocks
Base Clock
2407 MHz
706 MHz
Boost Clock
2572 MHz
706 MHz
Memory Clock
1750 MHz 28 Gbps effective
800 MHz 3.2 Gbps effective
Memory
Memory Size
8 GB
4 GB
VRAM (MB)
8,192
4,096 -50.0%
Memory Type
GDDR7
GDDR5
Memory Bus
128 bit
256 bit
Bandwidth
448.0 GB/s
102.4 GB/s
Cache
L1 Cache
128 KB (per SM)
16 KB (per SMX)
L2 Cache
32 MB
512 KB
Performance
Pixel Rate
123.5 GPixel/s
11.30 GPixel/s
Texture Rate
370.4 GTexel/s
45.18 GTexel/s
FP32 (TFLOPS)
23.70 TFLOPS
1,084.4 GFLOPS
FP64 (TFLOPS)
370.4 GFLOPS (1:64)
45.18 GFLOPS (1:24)
FP16 (TFLOPS)
23.70 TFLOPS (1:1)
—
AI/RT
RT Cores
36
—
Tensor Cores
144
—
Power
TDP
180 W
75 W
TDP (W)
180
75 -58.3%
Suggested PSU
450 W
—
Power Connectors
1x 8-pin
None
Architecture
Architecture
Blackwell 2.0
Kepler
GPU Name
GB206
GK104
Generation
GeForce 50
Quadro Kepler-M (Kx100M)
Process Size
5 nm
28 nm
Transistors
21,900 million
3,540 million
Die Size
181 mm²
294 mm²
Foundry
TSMC
TSMC
Density
121.0M / mm²
12.0M / mm²
API Support
DirectX
12 Ultimate (12_2)
12 (11_0)
OpenGL
4.6
4.6
Vulkan
1.4
1.2.175
OpenCL
3.0
3.0
CUDA
12.0
3.0
Shader Model
6.9
6.5 (5.1)
Physical
Slot Width
Dual-slot
MXM Module
Length
241 mm 9.5 inches
—
Height
111 mm 4.4 inches
—
Outputs
1x HDMI 2.1b3x DisplayPort 2.1b
Portable Device Dependent
Bus Interface
PCIe 5.0 x8
MXM-B (3.0)
Other
Launch Price
379 USD
—
Production
Active
End-of-life
Predecessor
GeForce 40
Quadro Fermi-M
Successor
GeForce 60
Quadro Maxwell-M
View GeForce RTX 5060 Ti 8 GB Details View Quadro K3100M Details