NVIDIA GeForce RTX 4090 D vs NVIDIA Tesla V100S PCIe 32 GB Comparison
NVIDIA GeForce RTX 4090 D
Tesla V100S PCIe 32 GB
PERFORMANCE BENCHMARKS
Analysis: NVIDIA GeForce RTX 4090 D vs NVIDIA Tesla V100S PCIe 32 GB
The NVIDIA Tesla V100S PCIe 32 GB and the NVIDIA GeForce RTX 4090 D represent two very different answers to the question of what a high-end GPU should be. One is a compute-focused accelerator from the Volta era, built for scientific workloads that need massive memory capacity and error-checking stability. The other is a consumer-class Ada Lovelace monster, engineered for maximum rendering throughput and real-time ray tracing. The benchmark data shows a clear split: the RTX 4090 D wins the only shared test decisively, but the V100S holds its own in the broader professional landscape thanks to its unique memory configuration. This analysis breaks down where each card wins, what separates their architectures, and who should buy which based strictly on the available facts.
Where Each One Wins
The data paints a straightforward picture for the head-to-head matchup. In the only shared benchmark, Geekbench OpenCL, the RTX 4090 D scores 278,621 against the V100S’s 194,415, a delta of -30.2% for the older card. That single win gives the RTX 4090 D a 1-0 record in direct comparisons. The RTX 4090 D also posts scores in 3DMark Steel Nomad DX12 (8,587) and Geekbench Vulkan (246,941), tests the V100S does not appear in, indicating a wider range of supported workloads.
However, the V100S wins on the metric that matters most for certain server deployments: memory capacity. It carries 32 GB of HBM2 across a 4096-bit bus, delivering 1.13 TB/s of bandwidth. The RTX 4090 D has 24 GB of GDDR6X on a 384-bit bus, which yields 1.01 TB/s. The V100S’s 8 GB advantage and higher bandwidth make it the better choice for datasets that exceed 24 GB, even though its raw compute is far lower. In the nearestRivals data, the V100S’s average benchmark score of 194,415 puts it 3.9% ahead of the A100 SXM4 40 GB and 5.8% ahead of the A100 SXM4 80 GB, showing it remains competitive in the accelerator tier. The RTX 4090 D’s average of 178,050 sits 4.9% behind the A100 SXM4 40 GB and 3.1% behind the A100 SXM4 80 GB, indicating it is slightly weaker than those datacenter parts in aggregate compute.
Architecture Differences
The V100S is built on the Volta architecture using TSMC’s 12 nm process, with a die size of 815 mm² containing 21,100 million transistors. That works out to a transistor density of 25.9M per mm². The RTX 4090 D uses the Ada Lovelace architecture on a 5 nm process from the same foundry, packing 76,300 million transistors into a smaller 609 mm² die, achieving a much higher density of 125.3M per mm².
The compute resources diverge sharply. The V100S has 5,120 shading units, 320 TMUs, and 128 ROPs, plus 640 tensor cores for AI work. It has no dedicated ray tracing cores. The RTX 4090 D fields 14,592 shading units, 456 TMUs, and 176 ROPs, along with 114 RT cores and 456 tensor cores. The V100S’s FP32 throughput is 16.35 TFLOPS, while its FP16 rate is 32.71 TFLOPS at a 2:1 ratio. The RTX 4090 D delivers 73.54 TFLOPS in both FP32 and FP16 at a 1:1 ratio, more than 4.5 times the V100S’s FP32 figure.
Memory architecture also differs fundamentally. The V100S uses HBM2 with a 4096-bit interface, while the RTX 4090 D uses GDDR6X with a 384-bit interface. Clock speeds reflect their different roles: the V100S runs at a 1245 MHz base and 1597 MHz boost, with memory at 1107 MHz (2.2 Gbps effective). The RTX 4090 D boosts to 2520 MHz from a 2280 MHz base, with memory at 1313 MHz (21 Gbps effective). The RTX 4090 D’s pixel rate of 443.5 GPixel/s more than doubles the V100S’s 204.4 GPixel/s, and its texture rate of 1,149.1 GTexel/s is over twice the V100S’s 511.0 GTexel/s.
Head-to-Head Benchmarks
The single direct comparison is Geekbench OpenCL, and it is not close. The RTX 4090 D scores 278,621, which is 30.2% higher than the V100S’s 194,415. That margin reflects the massive gap in shading units, clock speed, and memory bandwidth efficiency. The RTX 4090 D’s 14,592 shading units at a 2520 MHz boost simply overwhelm the V100S’s 5,120 units at 1597 MHz, even though the V100S has a wider memory bus.
Looking at the nearestRivals context, the V100S’s 194,415 average score places it within 0.8% of the RTX 6000D (195,964) and 3.9% ahead of the A100 SXM4 40 GB (187,147). The RTX 4090 D’s 178,050 average is 2.2% behind the RTX PRO 5000 Blackwell (182,109) and 3.6% behind the RTX 5000 Ada Generation (184,664). This suggests the V100S, despite being older and end-of-life, still outperforms several current datacenter accelerators in aggregate compute, while the RTX 4090 D trails those same parts. The RTX 4090 D’s advantage appears concentrated in specific tests like 3DMark Steel Nomad DX12, where it scores 8,587, a workload the V100S cannot run due to lacking RT cores and DirectX 12 Ultimate support.
FAQ
Q: Which card is faster in OpenCL compute?
A: The RTX 4090 D is significantly faster, scoring 278,621 versus the V100S’s 194,415 in Geekbench OpenCL, a 30.2% advantage.
Q: Does the V100S have more memory than the RTX 4090 D?
A: Yes. The V100S has 32 GB of HBM2, while the RTX 4090 D has 24 GB of GDDR6X. The V100S also has higher memory bandwidth at 1.13 TB/s versus 1.01 TB/s.
Q: Which card supports ray tracing?
A: Only the RTX 4090 D has dedicated RT cores, with 114 of them. The V100S has no RT cores, so it cannot perform hardware-accelerated ray tracing.
Q: What are the power requirements for each card?
A: The V100S has a 250 W TDP and requires a 600 W suggested PSU with 2x 8-pin connectors. The RTX 4090 D has a 425 W TDP, needs an 800 W suggested PSU, and uses a single 16-pin connector.
Q: Which card has better API support for modern games?
A: The RTX 4090 D supports DirectX 12 Ultimate (12_2), while the V100S is limited to DirectX 12 (12_1). Both support OpenGL 4.6 and Vulkan 1.4.
Q: How does each card rank against its nearest rivals?
A: The V100S’s average score of 194,415 is 0.8% behind the RTX 6000D but 5.8% ahead of the A100 SXM4 80 GB. The RTX 4090 D’s average of 178,050 is 2.2% behind the RTX PRO 5000 Blackwell and 4.9% behind the A100 SXM4 40 GB.
Specification Differences
| Specification | Tesla V100S PCIe 32 GB | GeForce RTX 4090 D |
|---|---|---|
| Architecture | Volta | Ada Lovelace |
| Process Node | 12 nm | 5 nm |
| Transistors | 21,100 million | 76,300 million |
| Die Size | 815 mm² | 609 mm² |
| Base Clock | 1245 MHz | 2280 MHz |
| Boost Clock | 1597 MHz | 2520 MHz |
| Memory Size | 32 GB | 24 GB |
| Memory Type | HBM2 | GDDR6X |
| Memory Bus | 4096 bit | 384 bit |
| Memory Bandwidth | 1.13 TB/s | 1.01 TB/s |
| Shading Units | 5120 | 14592 |
| TMUs | 320 | 456 |
| ROPs | 128 | 176 |
| RT Cores | None | 114 |
| Tensor Cores | 640 | 456 |
| FP32 Compute | 16.35 TFLOPS | 73.54 TFLOPS |
| FP16 Compute | 32.71 TFLOPS (2:1) | 73.54 TFLOPS (1:1) |
| TDP | 250 W | 425 W |
| Power Connectors | 2x 8-pin | 1x 16-pin |
| Suggested PSU | 600 W | 800 W |
| Bus Interface | PCIe 3.0 x16 | PCIe 4.0 x16 |
| Display Outputs | No outputs | 1x HDMI 2.1, 3x DisplayPort 1.4a |
| DirectX Support | 12 (12_1) | 12 Ultimate (12_2) |
| Release Date | 2019-11-25 | 2023-12-27 |
| Production Status | End-of-life | End-of-life |
The Verdict
The choice comes down to workload. If the task involves rendering, ray tracing, or any consumer-facing graphics workload, the RTX 4090 D is the clear winner. Its 30.2% lead in OpenCL, plus its exclusive 3DMark Steel Nomad DX12 score of 8,587 and Vulkan score of 246,941, demonstrate a far more capable and versatile processor. Its 73.54 TFLOPS FP32 throughput dwarfs the V100S’s 16.35 TFLOPS, making it the obvious pick for compute-heavy tasks that fit within 24 GB of memory. The RTX 4090 D also offers display outputs, making it usable in a desktop workstation, while the V100S has none.
However, the V100S remains relevant for a narrow but critical niche. Its 32 GB of HBM2 with 1.13 TB/s bandwidth exceeds the RTX 4090 D’s 24 GB and 1.01 TB/s, which matters for large language models or scientific simulations that cannot be split across smaller memory pools. Its average benchmark score of 194,415 also places it ahead of the A100 SXM4 80 GB by 5.8%, showing it still holds compute value despite its age. For server deployments where memory capacity is the bottleneck and power draw is a concern (250 W versus 425 W), the V100S is the safer choice. The RTX 4090 D’s launch MSRP of 1,599 USD reflects its consumer positioning, but the data shows it is the superior performer in almost every measurable way. Pick the V100S only if you specifically need more than 24 GB of VRAM with higher bandwidth; pick the RTX 4090 D for everything else.