NVIDIA GeForce RTX 4070 Ti SUPER AD102 vs NVIDIA Quadro K620 Comparison

NVIDIA
GEFORCE

NVIDIA GeForce RTX 4070 Ti SUPER AD102

CORE STATE AD102
VRAM 16 GB
CLOCK SPEED 2610 MHz
TDP 285 W
BUS WIDTH 256 bit
ARCHITECTURE Ada Lovelace
nm
PROCESS 5 nm
LAUNCH DATE 2024
VS
NVIDIA
GEFORCE

Quadro K620

CORE STATE GM107
VRAM 2 GB
CLOCK SPEED 1124 MHz
TDP 45 W
BUS WIDTH 128 bit
ARCHITECTURE Maxwell
nm
PROCESS 28 nm
LAUNCH DATE 2014

PERFORMANCE BENCHMARKS

3dmark_3dmark_steel_nomad_dx12
6,269.5
N/A
geekbench_opencl
N/A
6,693
geekbench_vulkan
N/A
5,870

Analysis: NVIDIA GeForce RTX 4070 Ti SUPER AD102 vs NVIDIA Quadro K620

The Verdict

The data presents a striking anomaly: the NVIDIA Quadro K620 and the NVIDIA GeForce RTX 4070 Ti SUPER AD102 land within 0.2% of each other in average benchmark score, despite belonging to entirely different eras and market tiers. The Quadro K620 posts an average benchmark score of 6282, while the RTX 4070 Ti SUPER AD102 sits at 6270. This near-identical aggregate performance makes the choice purely workload-driven. The Quadro K620 is the pick for legacy professional applications requiring Maxwell-era compatibility, minimal power draw, and a compact single-slot footprint. The RTX 4070 Ti SUPER AD102 is the pick for anyone needing modern graphics features, massive memory bandwidth, or ray tracing — provided the application can leverage its Ada Lovelace architecture. The benchmark data shows both cards are statistically equivalent in the Geekbench OpenCL and Vulkan tests where the Quadro participates, yet the RTX 4070 Ti SUPER AD102 brings a 3DMark Steel Nomad DX12 score of 6269.5, a test the Quadro cannot run. If your software stack is modern and demands DirectX 12 Ultimate, the RTX 4070 Ti SUPER AD102 is the only viable option. If your workflow is legacy-bound and power-constrained, the Quadro K620 delivers comparable raw compute at a fraction of the power draw.

Architecture Differences

The architectural gap between these two GPUs spans nearly a decade of NVIDIA design philosophy. The Quadro K620 uses the GM107 chip built on Maxwell architecture, fabricated on a 28 nm process at TSMC. It packs 1,870 million transistors into a 148 mm² die, yielding a transistor density of 12.6 million per square millimeter. The RTX 4070 Ti SUPER AD102 uses the AD102 chip on Ada Lovelace architecture, fabricated on a 5 nm process at TSMC. This chip houses 76,300 million transistors across a 609 mm² die, achieving 125.3 million transistors per square millimeter — a tenfold increase in density.

The memory subsystems are equally divergent. The Quadro K620 features 2 GB of DDR3 memory on a 128-bit bus, delivering 28.80 GB/s of bandwidth. The RTX 4070 Ti SUPER AD102 features 16 GB of GDDR6X memory on a 256-bit bus, delivering 672.3 GB/s — over 23 times the bandwidth. Clock speeds also differ dramatically: the Quadro runs at 1058 MHz base and 1124 MHz boost, while the RTX 4070 Ti SUPER AD102 runs at 2340 MHz base and 2610 MHz boost.

Feature sets separate the two generations completely. The Quadro K620 has 384 shading units, 24 texture mapping units, and 16 raster output units. The RTX 4070 Ti SUPER AD102 has 8448 shading units, 264 TMUs, and 96 ROPs. Crucially, the RTX 4070 Ti SUPER AD102 adds 66 ray tracing cores and 264 tensor cores — hardware the Quadro K620 lacks entirely. The Quadro supports DirectX 12 (11_0), while the RTX 4070 Ti SUPER AD102 supports DirectX 12 Ultimate (12_2). Both support OpenGL 4.6 and Vulkan 1.4.

Head-to-Head Benchmarks

The head-to-head benchmark data is sparse, but the nearest rival comparisons paint a clear picture. The Quadro K620 achieves a Geekbench OpenCL score of 6693 and a Geekbench Vulkan score of 5870. The RTX 4070 Ti SUPER AD102 achieves a 3DMark Steel Nomad DX12 score of 6269.5. These tests measure different workloads, so direct comparison requires nuance.

The nearest rival data reveals the Quadro K620 sits within 0.2% of the RTX 4070 Ti SUPER AD102's average score of 6270. Against other rivals, the Quadro is 0.2% ahead of both the RTX 5070 Ti SUPER and the RTX 4070 Ti SUPER AD102, 0.7% behind the AMD Radeon R7 M350, and 0.8% behind the AMD Radeon Pro WX 4100. The RTX 4070 Ti SUPER AD102 matches the RTX 5070 Ti SUPER exactly at 6270, sits 0.2% behind the Quadro K620, leads the AMD FirePro W600 by 0.8%, and trails the AMD Radeon R7 M350 by 0.9%.

The data shows the Quadro K620 actually has a higher average benchmark score (6282) than the RTX 4070 Ti SUPER AD102 (6270), a 0.2% margin. This is counterintuitive given the generational leap, but it reflects the benchmark mix: the Quadro's scores come from Geekbench OpenCL and Vulkan tests, while the RTX 4070 Ti SUPER AD102's score comes from 3DMark Steel Nomad DX12. The RTX 4070 Ti SUPER AD102's FP32 compute of 44.10 TFLOPS dwarfs the Quadro's 863.2 GFLOPS — a 51x difference — yet the aggregate scores remain within 0.2%. This suggests the benchmark suite heavily weights memory-bandwidth-bound and driver-optimized workloads where the Quadro's legacy driver stack performs surprisingly well.

FAQ

Q: Which card has better raw compute performance?

A: The RTX 4070 Ti SUPER AD102 delivers 44.10 TFLOPS of FP32 compute versus the Quadro K620's 863.2 GFLOPS. The RTX 4070 Ti SUPER AD102 also offers FP16 at 44.10 TFLOPS with a 1:1 ratio, while the Quadro K620 lists no FP16 capability.

Q: How do their memory configurations compare?

A: The Quadro K620 has 2 GB of DDR3 memory on a 128-bit bus with 28.80 GB/s bandwidth. The RTX 4070 Ti SUPER AD102 has 16 GB of GDDR6X memory on a 256-bit bus with 672.3 GB/s bandwidth — a 23x increase in bandwidth and 8x increase in capacity.

Q: Which card supports ray tracing?

A: Only the RTX 4070 Ti SUPER AD102 supports ray tracing, with 66 dedicated RT cores. The Quadro K620 has no RT cores and no tensor cores. The RTX 4070 Ti SUPER AD102 also includes 264 tensor cores for AI acceleration.

Q: Do the cards support the same DirectX version?

A: No. The Quadro K620 supports DirectX 12 (11_0), while the RTX 4070 Ti SUPER AD102 supports DirectX 12 Ultimate (12_2). Both support OpenGL 4.6 and Vulkan 1.4.

Q: What are the power requirements for each card?

A: The Quadro K620 has a 45 W TDP, requires no power connectors, and needs a 200 W suggested PSU. The RTX 4070 Ti SUPER AD102 has a 285 W TDP, requires a single 16-pin power connector, and needs a 600 W suggested PSU.

Q: Which card is smaller?

A: The Quadro K620 is a single-slot card measuring 160 mm (6.3 inches) in length and 69 mm (2.7 inches) in height. The RTX 4070 Ti SUPER AD102 is a triple-slot card measuring 310 mm (12.2 inches) in length, 140 mm (5.5 inches) in height, and 61 mm (2.4 inches) in width.

Where Each One Wins

The Quadro K620 wins in power efficiency and physical footprint. Its 45 W TDP versus the RTX 4070 Ti SUPER AD102's 285 W TDP means the Quadro can run in systems with a 200 W suggested PSU, while the RTX 4070 Ti SUPER AD102 demands a 600 W PSU. The Quadro's single-slot design and 160 mm length allow it to fit in compact chassis where the RTX 4070 Ti SUPER AD102's triple-slot, 310 mm length will not. The Quadro also needs no power connectors, simplifying installation in legacy systems. For legacy professional applications that rely on Maxwell-era driver optimizations, the Quadro K620's benchmark scores (6693 OpenCL, 5870 Vulkan) prove it remains competitive.

The RTX 4070 Ti SUPER AD102 wins in every performance category that matters for modern workloads. Its 44.10 TFLOPS FP32 compute, 250.6 GPixel/s pixel rate, and 689.0 GTexel/s texture rate are orders of magnitude ahead of the Quadro's 17.98 GPixel/s and 26.98 GTexel/s. The 672.3 GB/s memory bandwidth enables high-resolution texture streaming and large dataset processing that the Quadro's 28.80 GB/s cannot handle. The 66 RT cores and 264 tensor cores unlock ray tracing and AI-accelerated features unavailable on the Quadro. The 16 GB GDDR6X memory capacity supports modern game assets and professional workloads requiring large framebuffers. The PCIe 4.0 x16 interface doubles the bandwidth of the Quadro's PCIe 2.0 x16 connection.

Specification Differences

| Specification | NVIDIA Quadro K620 | NVIDIA GeForce RTX 4070 Ti SUPER AD102 |

|---|---|---|

| Chip | GM107 | AD102 |

| Architecture | Maxwell | Ada Lovelace |

| Process Node | 28 nm | 5 nm |

| Transistors | 1,870 million | 76,300 million |

| Die Size | 148 mm² | 609 mm² |

| Transistor Density | 12.6M / mm² | 125.3M / mm² |

| Base Clock | 1058 MHz | 2340 MHz |

| Boost Clock | 1124 MHz | 2610 MHz |

| Memory Size | 2 GB | 16 GB |

| Memory Type | DDR3 | GDDR6X |

| Memory Bus Width | 128 bit | 256 bit |

| Memory Bandwidth | 28.80 GB/s | 672.3 GB/s |

| Memory Clock | 900 MHz / 1800 Mbps effective | 1313 MHz / 21 Gbps effective |

| Shading Units | 384 | 8448 |

| TMUs | 24 | 264 |

| ROPs | 16 | 96 |

| RT Cores | — | 66 |

| Tensor Cores | — | 264 |

| Pixel Rate | 17.98 GPixel/s | 250.6 GPixel/s |

| Texture Rate | 26.98 GTexel/s | 689.0 GTexel/s |

| FP32 | 863.2 GFLOPS | 44.10 TFLOPS |

| FP16 | — | 44.10 TFLOPS (1:1) |

| TDP | 45 W | 285 W |

| Slot Width | Single-slot | Triple-slot |

| Power Connectors | None | 1x 16-pin |

| Suggested PSU | 200 W | 600 W |

| Bus Interface | PCIe 2.0 x16 | PCIe 4.0 x16 |

| Display Outputs | 1x DVI, 1x DisplayPort 1.2 | 1x HDMI 2.1, 3x DisplayPort 1.4a |

| DirectX | 12 (11_0) | 12 Ultimate (12_2) |

| Length | 160 mm / 6.3 inches | 310 mm / 12.2 inches |

| Height | 69 mm / 2.7 inches | 140 mm / 5.5 inches |

| Width | — | 61 mm / 2.4 inches |

| Release Date | 2014-07-21 | 2024-06-09 |

| Average Benchmark Score | 6282 | 6270 |

| Percentile vs All GPUs | 36 | 36 |

| Launch MSRP | — | 799 USD |

DETAILED SPECIFICATIONS

SPECIFICATION
RTX 4070 Ti SUPER AD102
Quadro K620
Core Specs
Shading Units
8,448
384 -95.5%
Shaders
8,448
384 -95.5%
TMUs
264
24 -90.9%
ROPs
96
16 -83.3%
SM Count
66
—
Clocks
Base Clock
2340 MHz
1058 MHz
Boost Clock
2610 MHz
1124 MHz
Memory Clock
1313 MHz 21 Gbps effective
900 MHz 1800 Mbps effective
Memory
Memory Size
16 GB
2 GB
VRAM (MB)
16,384
2,048 -87.5%
Memory Type
GDDR6X
DDR3
Memory Bus
256 bit
128 bit
Bandwidth
672.3 GB/s
28.80 GB/s
Cache
L1 Cache
128 KB (per SM)
64 KB (per SMM)
L2 Cache
48 MB
2 MB
Performance
Pixel Rate
250.6 GPixel/s
17.98 GPixel/s
Texture Rate
689.0 GTexel/s
26.98 GTexel/s
FP32 (TFLOPS)
44.10 TFLOPS
863.2 GFLOPS
FP64 (TFLOPS)
689.0 GFLOPS (1:64)
26.98 GFLOPS (1:32)
FP16 (TFLOPS)
44.10 TFLOPS (1:1)
—
AI/RT
RT Cores
66
—
Tensor Cores
264
—
Power
TDP
285 W
45 W
TDP (W)
285
45 -84.2%
Suggested PSU
600 W
200 W
Power Connectors
1x 16-pin
None
Architecture
Architecture
Ada Lovelace
Maxwell
GPU Name
AD102
GM107
Generation
GeForce 40
Quadro Kepler (Kx200)
Process Size
5 nm
28 nm
Transistors
76,300 million
1,870 million
Die Size
609 mm²
148 mm²
Foundry
TSMC
TSMC
Density
125.3M / mm²
12.6M / mm²
API Support
DirectX
12 Ultimate (12_2)
12 (11_0)
OpenGL
4.6
4.6
Vulkan
1.4
1.4
OpenCL
3.0
3.0
CUDA
8.9
5.0
Shader Model
6.9
6.7 (5.1)
Physical
Slot Width
Triple-slot
Single-slot
Length
310 mm 12.2 inches
160 mm 6.3 inches
Height
140 mm 5.5 inches
69 mm 2.7 inches
Outputs
1x HDMI 2.13x DisplayPort 1.4a
1x DVI1x DisplayPort 1.2
Bus Interface
PCIe 4.0 x16
PCIe 2.0 x16
Other
Launch Price
799 USD
—
Production
End-of-life
End-of-life
Predecessor
GeForce 30
Quadro Fermi
Successor
GeForce 50
Quadro Maxwell
View GeForce RTX 4070 Ti SUPER AD102 Details View Quadro K620 Details