NVIDIA GeForce RTX 4070 GDDR6 vs NVIDIA Quadro K2100M Comparison
NVIDIA GeForce RTX 4070 GDDR6
Quadro K2100M
PERFORMANCE BENCHMARKS
Analysis: NVIDIA GeForce RTX 4070 GDDR6 vs NVIDIA Quadro K2100M
NVIDIA GeForce RTX 4070 GDDR6 and NVIDIA Quadro K2100M occupy opposite ends of the GPU spectrum, separated by over a decade of architecture evolution. The RTX 4070 GDDR6, built on TSMC's 5 nm process, delivers a 3DMark Steel Nomad DX12 score of 4334.5, placing it in the 25th percentile of all GPUs. The Quadro K2100M, a Kepler-generation mobile workstation part from 2013, averages 4151 across Geekbench Metal, OpenCL, and Vulkan tests, also landing in the 25th percentile. While both sit at the same percentile rank, the underlying data reveals a massive gulf in raw capability and architectural approach.
Head-to-Head Benchmarks
Direct head-to-head benchmark comparisons are not available in the dataset, so the analysis relies on each part's respective benchmark suite. The RTX 4070 GDDR6's sole recorded benchmark is 3DMark Steel Nomad DX12, where it scores 4334.5. Its nearest rivals in that test include the Intel Iris Pro Graphics 5200 at 4360 (0.6% ahead), the NVIDIA GeForce 930M at 4388 (1.2% ahead), the AMD FirePro W2100 at 4295 (0.9% behind), and the NVIDIA GeForce GTX 460M at 4282 (1.2% behind). This clustering suggests the RTX 4070 GDDR6, despite its modern architecture, produces a score tightly grouped with older and lower-tier parts in this specific synthetic workload. The deltaPct values are all within roughly one percent, indicating that the 4070 GDDR6 is statistically near-identical to these rivals in Steel Nomad, with no decisive victory or defeat.
The Quadro K2100M presents a broader benchmark profile across three Geekbench tests. Its strongest result is OpenCL at 4587, followed by Vulkan at 4343, and Metal at 3524. The average of these three is 4151. Its nearest rivals, based on average scores, include the AMD Radeon R5 M330 at 4170 (0.4% ahead), the NVIDIA GeForce GTX 1050 Ti at 4193 (1% ahead), the AMD Radeon RX 9060 XT 8 GB at 4093 (1.4% behind), and the Intel HD Graphics 630 at 4075 (1.9% behind). The K2100M's best single score (OpenCL 4587) is higher than its worst (Metal 3524), showing variance of about 23% across different compute APIs. In contrast, the RTX 4070 GDDR6 has no comparable multi-API spread because only one benchmark result exists.
When comparing the two directly, the RTX 4070 GDDR6's 4334.5 Steel Nomad score exceeds the K2100M's average of 4151 by roughly 4.4%. However, the K2100M's OpenCL score of 4587 tops the 4070's Steel Nomad result by about 5.8%. This cross-benchmark comparison is imperfect—different tests measure different workloads—but it shows that the K2100M is not universally slower in every metric. The 4070 GDDR6's single benchmark leaves no room for determining consistency, while the K2100M demonstrates variability across Metal, OpenCL, and Vulkan. Neither part wins decisively in this dataset; the wins are split by benchmark type rather than by overall superiority.
Architecture Differences
The RTX 4070 GDDR6 uses the AD104 chip based on Ada Lovelace architecture, manufactured on a 5 nm process at TSMC. It packs 35,800 million transistors into a 294 mm² die, yielding a transistor density of 121.8 million per square millimeter. The Quadro K2100M uses the GK106S chip based on Kepler, built on a 28 nm process also at TSMC. Its transistor count is 2,540 million on a 221 mm² die, giving a density of 11.5 million per square millimeter. The density difference is stark: the 4070 GDDR6 crams over ten times more transistors per area, reflecting over a decade of process node advancement.
Clock speeds separate the two further. The RTX 4070 GDDR6 runs at a base clock of 1920 MHz and boosts to 2475 MHz. The Quadro K2100M operates at a fixed 667 MHz for both base and boost, meaning no dynamic clocking headroom. Memory clocks differ as well: the 4070 GDDR6 uses 2500 MHz with 20 Gbps effective data rate, while the K2100M uses 752 MHz with 3 Gbps effective. The 4070 GDDR6's memory subsystem comprises 12 GB of GDDR6 on a 192-bit bus, delivering 480.0 GB/s bandwidth. The K2100M has 2 GB of GDDR5 on a 128-bit bus, yielding 48.13 GB/s—roughly one-tenth the bandwidth.
Compute resources show an order-of-magnitude gap. The RTX 4070 GDDR6 has 5888 shading units, 184 texture mapping units, 64 raster output units, 46 ray tracing cores, and 184 tensor cores. The Quadro K2100M has 576 shading units, 48 TMUs, and 16 ROPs, with no ray tracing or tensor cores. Pixel rate on the 4070 GDDR6 is 158.4 GPixel/s versus 8.004 GPixel/s on the K2100M. Texture rate is 455.4 GTexel/s versus 32.02 GTexel/s. FP32 compute is 29.15 TFLOPS versus 768.4 GFLOPS—a 38x difference. The 4070 GDDR6 also supports FP16 at 29.15 TFLOPS (1:1 ratio), while the K2100M lists no FP16 capability.
FAQ
Q: How does the RTX 4070 GDDR6 compare to the Quadro K2100M in FP32 compute?
A: The RTX 4070 GDDR6 delivers 29.15 TFLOPS of FP32 performance, while the Quadro K2100M provides 768.4 GFLOPS. This represents a roughly 38x advantage for the 4070 GDDR6, driven by its higher shading unit count (5888 vs 576) and much faster clock speeds (2475 MHz boost vs 667 MHz).
Q: Which GPU has higher memory bandwidth?
A: The RTX 4070 GDDR6 has 480.0 GB/s of bandwidth from 12 GB of GDDR6 on a 192-bit bus. The Quadro K2100M has 48.13 GB/s from 2 GB of GDDR5 on a 128-bit bus. The 4070 GDDR6 offers approximately 10x the memory bandwidth.
Q: Do both GPUs support DirectX 12?
A: Yes, but at different levels. The RTX 4070 GDDR6 supports DirectX 12 Ultimate (12_2), while the Quadro K2100M supports DirectX 12 (11_0). The 4070 GDDR6 also supports Vulkan 1.4 versus Vulkan 1.2.175 on the K2100M. Both support OpenGL 4.6.
Q: What are the power requirements for each GPU?
A: The RTX 4070 GDDR6 has a TDP of 200 W and requires a 550 W suggested PSU with a single 16-pin power connector. The Quadro K2100M has a TDP of 55 W and uses a MXM module with no external power connectors.
Q: Which GPU has ray tracing and tensor core support?
A: Only the RTX 4070 GDDR6 includes these features, with 46 ray tracing cores and 184 tensor cores. The Quadro K2100M lacks both, as its Kepler architecture predates these hardware units.
Q: How do the benchmark scores compare statistically?
A: The RTX 4070 GDDR6 scores 4334.5 in 3DMark Steel Nomad DX12. The Quadro K2100M averages 4151 across Geekbench Metal (3524), OpenCL (4587), and Vulkan (4343). Both GPUs sit in the 25th percentile of all GPUs, but the 4070's single score is higher than the K2100M's average by about 4.4%.
The Verdict
The data points to the RTX 4070 GDDR6 as the superior part in nearly every measurable specification, but the benchmark results tell a more nuanced story. In its sole 3DMark test, the 4070 GDDR6 scores 4334.5, which is only 4.4% above the K2100M's average across three Geekbench tests. The K2100M's OpenCL score of 4587 actually exceeds the 4070's Steel Nomad result, suggesting that in certain compute workloads, the older Kepler chip can hold its own. However, the architectural gap is undeniable: 29.15 TFLOPS vs 768.4 GFLOPS FP32, 12 GB vs 2 GB memory, 480.0 GB/s vs 48.13 GB/s bandwidth. The 4070 GDDR6 also brings ray tracing, tensor cores, and a 5 nm process, none of which the K2100M possesses. For any modern workload, the RTX 4070 GDDR6 is the clear choice. The K2100M's only advantages are its 55 W TDP (versus 200 W) and its MXM form factor, which suits specific portable workstation designs.
Specification Differences
- Process Node: RTX 4070 GDDR6 uses 5 nm; Quadro K2100M uses 28 nm
- Transistors: 35,800 million vs 2,540 million
- Die Size: 294 mm² vs 221 mm²
- Transistor Density: 121.8M / mm² vs 11.5M / mm²
- Base Clock: 1920 MHz vs 667 MHz
- Boost Clock: 2475 MHz vs 667 MHz
- Memory Clock: 2500 MHz (20 Gbps effective) vs 752 MHz (3 Gbps effective)
- Memory Size: 12 GB GDDR6 vs 2 GB GDDR5
- Memory Bus Width: 192 bit vs 128 bit
- Memory Bandwidth: 480.0 GB/s vs 48.13 GB/s
- Shading Units: 5888 vs 576
- TMUs: 184 vs 48
- ROPs: 64 vs 16
- RT Cores: 46 vs none
- Tensor Cores: 184 vs none
- Pixel Rate: 158.4 GPixel/s vs 8.004 GPixel/s
- Texture Rate: 455.4 GTexel/s vs 32.02 GTexel/s
- FP32: 29.15 TFLOPS vs 768.4 GFLOPS
- FP16: 29.15 TFLOPS (1:1) vs not available
- TDP: 200 W vs 55 W
- Slot Width: Dual-slot vs MXM Module
- Power Connectors: 1x 16-pin vs none
- Bus Interface: PCIe 4.0 x16 vs MXM-A (3.0)
- Display Outputs: 1x HDMI 2.1, 3x DisplayPort 1.4a vs portable device dependent
- DirectX: 12 Ultimate (12_2) vs 12 (11_0)
- Vulkan: 1.4 vs 1.2.175
- Dimensions: 240 mm x 110 mm x 40 mm vs not specified
- Release Date: 2024-08-19 vs 2013-07-22
- Predecessor: GeForce 30 vs Quadro Fermi-M
- Successor: GeForce 50 vs Quadro Maxwell-M
- Launch MSRP: 599 USD (stated once) vs not specified
Where Each One Wins
The RTX 4070 GDDR6 wins in every raw performance category: FP32 compute (29.15 TFLOPS), memory bandwidth (480.0 GB/s), pixel rate (158.4 GPixel/s), and texture rate (455.4 GTexel/s). It is the only one of the two with ray tracing cores (46) and tensor cores (184), making it suitable for real-time ray-traced rendering and AI-accelerated workloads. Its 12 GB memory capacity and PCIe 4.0 x16 interface enable high-bandwidth data movement for modern games and professional applications. The 4070 GDDR6's dual-slot design and 200 W TDP fit standard desktop builds with a 550 W PSU.
The Quadro K2100M wins in power efficiency and form factor flexibility. Its 55 W TDP is less than one-third of the 4070's 200 W, and its MXM module design with no power connectors allows integration into compact portable systems. In Geekbench OpenCL, it posts 4587, a higher score than the 4070's 3DMark result of 4334.5, indicating that for certain compute tasks, the Kepler architecture remains competitive. The K2100M also supports Vulkan 1.2.175, which is newer than many of its contemporaries, and its 2 GB GDDR5 memory, while small, is sufficient for legacy workstation applications. For portable workstation deployments where power draw is critical and modern features are unnecessary, the K2100M holds a niche. For everything else, the RTX 4070 GDDR6 is the data-backed pick.