NVIDIA GeForce RTX 3070 Ti Mobile vs NVIDIA RTX PRO 2000 Blackwell Comparison

NVIDIA
GEFORCE

NVIDIA GeForce RTX 3070 Ti Mobile

CORE STATE GA104
VRAM 8 GB
CLOCK SPEED 1410 MHz
TDP 115 W
BUS WIDTH 256 bit
ARCHITECTURE Ampere
nm
PROCESS 8 nm
LAUNCH DATE 2022
VS
NVIDIA
GEFORCE

RTX PRO 2000 Blackwell

CORE STATE GB206
VRAM 16 GB
CLOCK SPEED 1957 MHz
TDP 70 W
BUS WIDTH 128 bit
ARCHITECTURE Blackwell 2.0
nm
PROCESS 5 nm
LAUNCH DATE 2025

PERFORMANCE BENCHMARKS

3dmark_3dmark_steel_nomad_dx12
2,572
2,374.5
geekbench_opencl
106,022
106,087
geekbench_vulkan
100,027
113,865
passmark_directx_10
124
122
passmark_directx_11
153
174
passmark_directx_12
73
80
passmark_directx_9
196
241
passmark_g2d
783
1,303
passmark_g3d
17,727
20,049
passmark_gpu_compute
7,504
8,396

Analysis: NVIDIA GeForce RTX 3070 Ti Mobile vs NVIDIA RTX PRO 2000 Blackwell

FAQ

Q: How do these two GPUs compare in overall average benchmark score?

A: The RTX PRO 2000 Blackwell has an average benchmark score of 25269, placing it in the 70th percentile of all GPUs. The RTX 3070 Ti Mobile averages 23518, sitting at the 69th percentile. The PRO card leads by roughly 7.4% in average score.

Q: Which GPU wins in Vulkan performance?

A: The RTX PRO 2000 Blackwell wins Geekbench Vulkan by a significant 13.8% margin, scoring 113865 versus the RTX 3070 Ti Mobile's 100027. This is one of the larger head-to-head deltas in the benchmark set.

Q: Is there any benchmark where the RTX 3070 Ti Mobile clearly wins?

A: Yes, in 3DMark Steel Nomad DX12 the RTX 3070 Ti Mobile scores 2572 versus 2374.5 for the RTX PRO 2000 Blackwell, a 7.7% advantage. It also edges out a win in Passmark DirectX 10 (124 vs 122, a 1.6% margin).

Q: How do the memory subsystems differ between these cards?

A: The RTX PRO 2000 Blackwell has 16 GB of GDDR7 on a 128-bit bus, delivering 288.0 GB/s bandwidth. The RTX 3070 Ti Mobile has 8 GB of GDDR6 on a 256-bit bus, providing 448.0 GB/s bandwidth. The older card has higher raw bandwidth but half the capacity.

Q: Which GPU has better compute performance in Passmark?

A: The RTX PRO 2000 Blackwell leads Passmark GPU Compute with a score of 8396, an 11.9% improvement over the RTX 3070 Ti Mobile's 7504. This aligns with the PRO card's 17.03 TFLOPS FP32 versus 16.60 TFLOPS for the mobile part.

Q: How does the 2D performance compare?

A: The RTX PRO 2000 Blackwell dominates Passmark G2D with a score of 1303, which is 66.4% higher than the RTX 3070 Ti Mobile's 783. This is the single largest margin across all head-to-head benchmarks.

Architecture Differences

The RTX PRO 2000 Blackwell is built on the GB206 chip using TSMC's 5 nm process, packing 21,900 million transistors into a 181 mm² die. This yields a transistor density of 121.0M per mm². In contrast, the RTX 3070 Ti Mobile uses the GA104 chip fabricated on Samsung's 8 nm node, with 17,400 million transistors spread across a much larger 392 mm² die, giving it a density of just 44.4M per mm². The newer process node is a fundamental architectural advantage for the Blackwell part, enabling roughly 26% more transistors in less than half the die area.

The memory architecture represents another major divergence. The RTX PRO 2000 Blackwell uses 16 GB of GDDR7 memory on a 128-bit bus with 288.0 GB/s bandwidth. The RTX 3070 Ti Mobile opts for 8 GB of GDDR6 on a 256-bit bus, achieving 448.0 GB/s bandwidth. The older card has 55.6% more memory bandwidth but only half the capacity, making it better suited for bandwidth-hungry workloads while the PRO card targets capacity-sensitive tasks.

Core configurations differ substantially. The RTX 3070 Ti Mobile has more shading units (5888 vs 4352), more texture mapping units (184 vs 136), more ROPs (96 vs 48), more ray tracing cores (46 vs 34), and more tensor cores (184 vs 136). Despite this hardware advantage, the RTX PRO 2000 Blackwell achieves slightly higher FP32 throughput at 17.03 TFLOPS versus 16.60 TFLOPS, thanks to its higher boost clock of 1957 MHz versus 1410 MHz on the mobile part. Clock speeds tell the story: the PRO card's base clock is 982 MHz versus 915 MHz, and its boost clock is nearly 39% higher.

The power envelope is dramatically different. The RTX PRO 2000 Blackwell has a TDP of 70 W and requires no power connectors, while the RTX 3070 Ti Mobile draws 115 W. The PRO card is a dual-slot design measuring 167 mm in length, 69 mm in height, and 20 mm in width, with 4x mini-DisplayPort 2.1b outputs. The mobile part has no fixed dimensions and its display outputs are portable-device dependent. The PRO card uses PCIe 5.0 x8 while the mobile card uses PCIe 4.0 x16. Both support DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4.

Head-to-Head Benchmarks

The RTX PRO 2000 Blackwell wins 8 of the 10 head-to-head benchmarks, but the margins vary widely. The most decisive victory is in Passmark G2D, where the PRO card scores 1303 against 783, a 66.4% advantage. This suggests dramatically better 2D and desktop composition performance, likely benefiting from the newer architecture and driver optimizations.

In 3D workloads, the PRO card shows consistent leads. Passmark DirectX 9 shows a 23% win (241 vs 196), while DirectX 11 shows a 13.7% margin (174 vs 153). DirectX 12 performance is closer, with the PRO card winning 80 vs 73, a 9.6% edge. Geekbench Vulkan shows a 13.8% advantage (113865 vs 100027), while OpenCL is essentially a tie at 106087 vs 106022, a 0.1% delta favoring the PRO card.

Passmark G3D and GPU Compute both favor the PRO card. The G3D score of 20049 beats 17727 by 13.1%, and the GPU Compute score of 8396 beats 7504 by 11.9%. These results indicate that the Blackwell architecture's efficiency gains translate into meaningful performance advantages across both graphics and compute workloads, despite the older card having more raw hardware resources.

The RTX 3070 Ti Mobile's two wins are notable. The 3DMark Steel Nomad DX12 result shows 2572 vs 2374.5, a 7.7% margin. This is the most modern and demanding benchmark in the set, suggesting the Ampere card retains an edge in certain DX12 scenarios. The Passmark DirectX 10 win is marginal at 124 vs 122, a 1.6% difference that's within noise territory.

Looking at nearest rivals provides context. The RTX PRO 2000 Blackwell's average score of 25269 puts it 1.4% behind the AMD Radeon RX 6700M (25633) and 1.8% behind both the AMD Radeon Pro W5700 (25726) and NVIDIA GeForce RTX 3080 Ti Mobile (25740). It beats the NVIDIA RTX A5000 Mobile (24763) by 2%. The RTX 3070 Ti Mobile's 23518 average sits 0.5% behind the RTX 3080 Mobile (23628), 0.9% behind AMD Radeon AI PRO R9700 (23315), 0.9% ahead of GTX TITAN Z (23736), and 1% ahead of AMD Radeon R9 M290X (23276).

The Verdict

The data clearly separates these two GPUs by use case and generation. The RTX PRO 2000 Blackwell is the newer, more efficient design that wins the majority of benchmarks despite having fewer cores and lower memory bandwidth. Its 16 GB of GDDR7 memory doubles the capacity of the RTX 3070 Ti Mobile, making it the obvious choice for workloads that need large datasets in VRAM. The 70 W TDP and lack of power connectors also make it far easier to integrate into compact systems.

The RTX 3070 Ti Mobile holds advantages in specific scenarios. Its 3DMark Steel Nomad DX12 win indicates it can outperform the PRO card in certain modern DX12 games. The 448.0 GB/s memory bandwidth is 55.6% higher than the PRO card's 288.0 GB/s, which matters for bandwidth-bound tasks. However, the mobile card is end-of-life, draws 115 W, and offers only 8 GB of memory.

For a builder choosing between these, the decision hinges on workload priorities. The RTX PRO 2000 Blackwell is the better all-around performer, winning 8 of 10 benchmarks with an average score that's 7.4% higher. Its 66.4% margin in Passmark G2D and 23% margin in DirectX 9 suggest it handles legacy and 2D workloads far better. The 13.8% Vulkan advantage points to strong modern API performance. The RTX 3070 Ti Mobile only makes sense if the specific DX12 Steel Nomad workload is critical, or if the higher memory bandwidth is essential for a particular application.

Specification Differences

The two cards differ across every major specification category. The RTX PRO 2000 Blackwell uses the GB206 chip on TSMC 5 nm with 21,900 million transistors and a 181 mm² die. The RTX 3070 Ti Mobile uses the GA104 chip on Samsung 8 nm with 17,400 million transistors and a 392 mm² die. Transistor density is 121.0M per mm² versus 44.4M per mm².

Clock speeds favor the PRO card: base 982 MHz versus 915 MHz, boost 1957 MHz versus 1410 MHz. Memory configuration is reversed: the PRO card has 16 GB GDDR7 on a 128-bit bus with 288.0 GB/s bandwidth; the mobile card has 8 GB GDDR6 on a 256-bit bus with 448.0 GB/s bandwidth. Memory clock is 1125 MHz (18 Gbps effective) versus 1750 MHz (14 Gbps effective).

Core counts favor the RTX 3070 Ti Mobile: 5888 shading units versus 4352, 184 TMUs versus 136, 96 ROPs versus 48, 46 RT cores versus 34, and 184 tensor cores versus 136. Despite this, the PRO card has higher pixel rate (93.94 GPixel/s vs 135.4 GPixel/s), texture rate (266.2 GTexel/s vs 259.4 GTexel/s), and FP32 (17.03 TFLOPS vs 16.60 TFLOPS).

Power and physical characteristics differ significantly. The PRO card runs at 70 W with no power connectors and a 250 W suggested PSU, in a dual-slot form factor measuring 167 mm x 69 mm x 20 mm. The mobile card runs at 115 W with no power connectors and no suggested PSU listed, with dimensions dependent on the host device. The PRO card uses PCIe 5.0 x8 and offers 4x mini-DisplayPort 2.1b outputs; the mobile card uses PCIe 4.0 x16 with portable-device-dependent outputs.

Production status and release timing differ: the RTX PRO 2000 Blackwell is Active and was released on 2025-08-10, while the RTX 3070 Ti Mobile is End-of-life and was released on 2022-01-03. The predecessor for the PRO card is Workstation Ada, while the mobile card's predecessor is GeForce 20 Mobile.

Where Each One Wins

The RTX PRO 2000 Blackwell wins in 8 benchmark categories, making it the dominant performer overall. Its 66.4% lead in Passmark G2D makes it the clear choice for desktop, 2D, and productivity applications. The 23% DirectX 9 margin and 13.7% DirectX 11 margin indicate strong legacy API performance. The 13.8% Vulkan advantage and 9.6% DirectX 12 win show it handles modern APIs well. The 13.1% Passmark G3D and 11.9% GPU Compute margins demonstrate solid all-around 3D and compute capability. Its 16 GB memory capacity is double the mobile card's, making it ideal for large datasets, rendering scenes, or AI inference workloads that exceed 8 GB. The 70 W TDP means it can fit in smaller systems with less cooling and no auxiliary power connectors.

The RTX 3070 Ti Mobile wins in 2 benchmark categories. Its 7.7% lead in 3DMark Steel Nomad DX12 is the most significant, indicating better performance in this specific modern DX12 test. The 1.6% Passmark DirectX 10 margin is negligible but still a win. Its 448.0 GB/s memory bandwidth is 55.6% higher than the PRO card, which could benefit workloads that are extremely bandwidth-sensitive, such as certain compute or texture-heavy scenarios. The higher core counts (5888 shading units, 184 TMUs, 96 ROPs) provide more raw parallel hardware, even if clock speeds limit their utilization. For users specifically targeting the Steel Nomad DX12 workload or applications that need maximum memory bandwidth without requiring large capacity, the mobile card has a defined role. However, its 115 W power draw and end-of-life status make it a less future-proof choice.

DETAILED SPECIFICATIONS

SPECIFICATION
RTX 3070 Ti Mobile
RTX PRO 2000 Blackwell
Core Specs
Shading Units
5,888
4,352 -26.1%
Shaders
5,888
4,352 -26.1%
TMUs
184
136 -26.1%
ROPs
96
48 -50.0%
SM Count
46
34 -26.1%
Clocks
Base Clock
915 MHz
982 MHz
Boost Clock
1410 MHz
1957 MHz
Memory Clock
1750 MHz 14 Gbps effective
1125 MHz 18 Gbps effective
Memory
Memory Size
8 GB
16 GB
VRAM (MB)
8,192
16,384 +100.0%
Memory Type
GDDR6
GDDR7
Memory Bus
256 bit
128 bit
Bandwidth
448.0 GB/s
288.0 GB/s
Cache
L1 Cache
128 KB (per SM)
128 KB (per SM)
L2 Cache
4 MB
32 MB
Performance
Pixel Rate
135.4 GPixel/s
93.94 GPixel/s
Texture Rate
259.4 GTexel/s
266.2 GTexel/s
FP32 (TFLOPS)
16.60 TFLOPS
17.03 TFLOPS
FP64 (TFLOPS)
259.4 GFLOPS (1:64)
266.2 GFLOPS (1:64)
FP16 (TFLOPS)
16.60 TFLOPS (1:1)
17.03 TFLOPS (1:1)
AI/RT
RT Cores
46
34 -26.1%
Tensor Cores
184
136 -26.1%
Power
TDP
115 W
70 W
TDP (W)
115
70 -39.1%
Suggested PSU
—
250 W
Power Connectors
None
None
Architecture
Architecture
Ampere
Blackwell 2.0
GPU Name
GA104
GB206
Generation
GeForce 30 Mobile
Blackwell PRO W (x000)
Process Size
8 nm
5 nm
Transistors
17,400 million
21,900 million
Die Size
392 mm²
181 mm²
Foundry
Samsung
TSMC
Density
44.4M / mm²
121.0M / mm²
API Support
DirectX
12 Ultimate (12_2)
12 Ultimate (12_2)
OpenGL
4.6
4.6
Vulkan
1.4
1.4
OpenCL
3.0
3.0
CUDA
8.6
12.0
Shader Model
6.8
6.9
Physical
Slot Width
—
Dual-slot
Length
—
167 mm 6.6 inches
Height
—
69 mm 2.7 inches
Outputs
Portable Device Dependent
4x mini-DisplayPort 2.1b
Bus Interface
PCIe 4.0 x16
PCIe 5.0 x8
Other
Production
End-of-life
Active
Predecessor
GeForce 20 Mobile
Workstation Ada
View GeForce RTX 3070 Ti Mobile Details View RTX PRO 2000 Blackwell Details