NVIDIA GeForce MX230 vs NVIDIA RTX PRO 5000 72 GB Blackwell Comparison
NVIDIA GeForce MX230
RTX PRO 5000 72 GB Blackwell
PERFORMANCE BENCHMARKS
Analysis: NVIDIA GeForce MX230 vs NVIDIA RTX PRO 5000 72 GB Blackwell
NVIDIA’s RTX PRO 5000 72 GB Blackwell and GeForce MX230 sit at opposite ends of the GPU spectrum, yet both appear in the same benchmark database with overlapping average scores. The RTX PRO 5000 is a flagship workstation accelerator built on the Blackwell 2.0 architecture with 72 GB of GDDR7 memory, while the MX230 is a 10 W Pascal-era mobile chip with 2 GB GDDR5. Their average benchmark scores differ by only 330 points (6407 vs 6077), but that aggregate figure masks a fundamental divergence in workload capability, API support, and hardware resources. The data below breaks down where each GPU truly wins, where it merely ties, and why the averages are so close despite the generational gap.
Head-to-Head Benchmarks
The FACT PACK provides no direct head-to-head benchmark entries (the headToHeadBenchmarks array is empty), so the comparison must rely on each card’s individual benchmark suite. The RTX PRO 5000 was tested across eight Passmark and 3DMark workloads, while the MX230 has only two Geekbench scores. This asymmetry makes direct score-for-score comparison impossible, but the available numbers still reveal clear performance tiers.
The RTX PRO 5000’s strongest result is its Passmark G3D score of 24310, which reflects its 14,080 shading units, 440 TMUs, and 160 ROPs. Its Passmark GPU compute score of 15667 further underscores its parallel compute strength. In contrast, the MX230’s only comparable metric is its Geekbench OpenCL score of 5739, which is far below the RTX PRO 5000’s compute output. The RTX PRO 5000 also delivers 66.94 TFLOPS FP32, versus the MX230’s 783.9 GFLOPS — a ratio of roughly 85:1. No benchmark in the pack directly pits them, but the FP32 figures alone show a two-order-of-magnitude gap in raw shader throughput.
Where the MX230 shows any numeric advantage is in the average score comparison. Its average benchmark score of 6077 places it within 0.5% of the NVIDIA Quadro P2000 (6049) and 1% ahead of the AMD Radeon 760M (6019). The RTX PRO 5000’s average of 6407 is only 0.3% ahead of the GTX 460 SE and GTX 580M (both 6389), and 1.1% behind the AMD Radeon Vega 10 Mobile (6476) and Quadro M5000M (6481). This suggests that in the database’s aggregate metric, the RTX PRO 5000 does not dominate its nearest rivals by a wide margin — its 37th percentile versus the MX230’s 35th percentile is a narrow gap. However, that percentile ranking reflects a mix of workloads, many of which may not exercise the RTX PRO 5000’s full feature set.
The MX230’s Geekbench Vulkan score of 6414 is its single highest result, exceeding its OpenCL score by 675 points. The RTX PRO 5000’s Passmark DirectX 12 score of 78 is notably low relative to its other Passmark scores (DirectX 10: 175, DirectX 11: 219, DirectX 9: 311), indicating that the legacy Passmark suite does not scale with the Blackwell architecture. This explains why the RTX PRO 5000’s average sits so close to older cards — the benchmark mix does not reward its modern features. In contrast, the MX230’s Geekbench scores, while lower in absolute terms, are more consistent with its hardware class.
Where Each One Wins
The RTX PRO 5000 wins decisively in every compute-heavy and graphics-intensive scenario. Its 72 GB GDDR7 memory with 1.34 TB/s bandwidth (384-bit bus) dwarfs the MX230’s 2 GB GDDR5 with 48.06 GB/s (64-bit bus). For workloads that load large datasets into VRAM — such as rendering, simulation, or AI inference — the RTX PRO 5000’s memory capacity is 36 times larger and its bandwidth is over 27 times higher. Its 110 RT cores and 440 tensor cores enable hardware-accelerated ray tracing and tensor operations, capabilities entirely absent from the MX230 (null RT and tensor core counts). The RTX PRO 5000 also supports DirectX 12 Ultimate (12_2), while the MX230 is limited to DirectX 12 (12_1), meaning the newer card can run more advanced shading and mesh shader features.
The MX230’s wins are narrower and confined to specific legacy or low-power contexts. Its 10 W TDP versus the RTX PRO 5000’s 300 W makes it suitable for fanless or battery-constrained designs, though the FACT PACK does not include any efficiency benchmark. In the database’s average score metric, the MX230’s nearest rivals are all within 1% (RTX A400 at 0%, Quadro P2000 at 0.5%, Iris Pro 6200 at -0.7%, Radeon 760M at 1%), showing that it performs consistently near its class baseline. The RTX PRO 5000’s nearest rivals also cluster within 1.1%, but those rivals (GTX 460 SE, GTX 580M, Vega 10 Mobile, Quadro M5000M) are all far older or lower-tier products.
For real-world use, the RTX PRO 5000 wins in professional 3D rendering, scientific compute, and any task that can leverage its 66.94 TFLOPS FP32 or its 1:1 FP16 ratio (66.94 TFLOPS). The MX230, with its 1:64 FP16 ratio (12.25 GFLOPS), is not viable for half-precision compute. The MX230’s 2 GB memory also caps texture-heavy applications, while the RTX PRO 5000’s 72 GB can hold entire scenes. The MX230 does win on portability: its IGP slot width and lack of power connectors mean it can fit in thin laptops, whereas the RTX PRO 5000 is a dual-slot card requiring a 16-pin connector and a 700 W suggested PSU.
Architecture Differences
The two GPUs come from entirely different architectural eras. The RTX PRO 5000 uses the GB202 chip on TSMC’s 5 nm process, packing 92,200 million transistors into a 750 mm² die (122.9M transistors per mm²). The MX230 uses the GP108 chip on Samsung’s 14 nm process, with 1,800 million transistors on a 74 mm² die (24.3M per mm²). The RTX PRO 5000’s transistor count is over 51 times higher, and its die is over 10 times larger. This scale difference explains the compute gap: 14,080 shading units versus 256, 440 TMUs versus 16, and 160 ROPs versus 16.
Memory technology separates them further. The RTX PRO 5000 uses GDDR7 with a 384-bit interface and 1.34 TB/s bandwidth, while the MX230 uses GDDR5 with a 64-bit interface and 48.06 GB/s bandwidth. The newer card’s memory clock is 1750 MHz (28 Gbps effective), versus the MX230’s 1502 MHz (6 Gbps effective). The RTX PRO 5000 has 110 RT cores and 440 tensor cores; the MX230 has neither. Clock speeds also differ: the RTX PRO 5000 boosts to 2377 MHz from a 1740 MHz base, while the MX230 boosts to just 1531 MHz from 1519 MHz. The RTX PRO 5000’s pixel rate is 380.3 GPixel/s and texture rate is 1,045.9 GTexel/s; the MX230’s are 24.50 GPixel/s and 24.50 GTexel/s, respectively.
Feature support diverges on several fronts. The RTX PRO 5000 supports PCIe 5.0 x16, while the MX230 is limited to PCIe 3.0 x4. Display outputs: the RTX PRO 5000 has 4x DisplayPort 2.1b, whereas the MX230’s outputs are “Portable Device Dependent.” Both support OpenGL 4.6 and Vulkan 1.4, but the RTX PRO 5000’s DirectX 12 Ultimate (12_2) exceeds the MX230’s DirectX 12 (12_1). The RTX PRO 5000’s predecessor is listed as “Workstation Ada,” while the MX230 has no predecessor. Production status differs as well: the RTX PRO 5000 is “Active,” and the MX230 is “End-of-life.” Release dates are also distinct: the RTX PRO 5000 launched on 2025-10-20, while the MX230 launched on 2019-02-20.
FAQ
Q: Which card has a higher average benchmark score?
A: The RTX PRO 5000 has an average benchmark score of 6407, which is 330 points higher than the MX230’s 6077. The RTX PRO 5000 sits at the 37th percentile of all GPUs, while the MX230 is at the 35th percentile.
Q: How do the two cards compare in memory capacity?
A: The RTX PRO 5000 has 72 GB of GDDR7 memory on a 384-bit bus with 1.34 TB/s bandwidth. The MX230 has 2 GB of GDDR5 memory on a 64-bit bus with 48.06 GB/s bandwidth. The RTX PRO 5000’s capacity is 36 times larger.
Q: Does the MX230 support ray tracing or tensor operations?
A: No. The MX230’s RT core and tensor core counts are listed as null, meaning it lacks both hardware ray tracing and tensor cores. The RTX PRO 5000 has 110 RT cores and 440 tensor cores.
Q: What is the FP32 compute difference?
A: The RTX PRO 5000 delivers 66.94 TFLOPS FP32, while the MX230 delivers 783.9 GFLOPS FP32. This is roughly an 85-fold difference in single-precision floating-point throughput.
Q: Which card has a higher boost clock?
A: The RTX PRO 5000 boosts to 2377 MHz, while the MX230 boosts to 1531 MHz. The RTX PRO 5000’s base clock is 1740 MHz, versus the MX230’s 1519 MHz.
Q: Are they on the same manufacturing process?
A: No. The RTX PRO 5000 uses TSMC’s 5 nm process with 92,200 million transistors on a 750 mm² die. The MX230 uses Samsung’s 14 nm process with 1,800 million transistors on a 74 mm² die.
The Verdict
The data is unambiguous: the NVIDIA RTX PRO 5000 72 GB Blackwell outperforms the NVIDIA GeForce MX230 in every measurable compute and graphics metric except power draw and physical footprint. Its 66.94 TFLOPS FP32 versus 783.9 GFLOPS, 72 GB versus 2 GB memory, 1.34 TB/s versus 48.06 GB/s bandwidth, and 110 RT cores versus none — these are not incremental differences but categorical ones. The RTX PRO 5000 is designed for workstation workloads where large VRAM, ray tracing, and tensor cores are essential. The MX230 is a legacy mobile part with a 10 W TDP, no RT or tensor support, and a 64-bit memory bus, suitable only for basic display output and light 2D tasks.
The average benchmark scores (6407 vs 6077) and percentile rankings (37th vs 35th) might suggest near-parity, but that is an artifact of the benchmark mix. The RTX PRO 5000’s Passmark DirectX scores (78 for DX12, 175 for DX10, 219 for DX11, 311 for DX9) are disproportionately low for its hardware, indicating that the legacy Passmark suite does not exercise its Blackwell features. The MX230’s Geekbench scores (5739 OpenCL, 6414 Vulkan) are more representative of its modest capabilities. Any user selecting between these two should base the choice on workload: the RTX PRO 5000 for professional 3D, AI, or compute tasks, and the MX230 only for ultra-low-power mobile systems where the RTX PRO 5000’s 300 W TDP and dual-slot size are impossible to accommodate. The verdict, strictly from the data, is that the RTX PRO 5000 is the superior GPU in nearly all respects, with the MX230’s only advantages being its 10 W power draw and IGP form factor.