NVIDIA GeForce MX230 vs NVIDIA GeForce RTX 4070 Ti SUPER AD102 Comparison
NVIDIA GeForce MX230
GeForce RTX 4070 Ti SUPER AD102
PERFORMANCE BENCHMARKS
Analysis: NVIDIA GeForce MX230 vs NVIDIA GeForce RTX 4070 Ti SUPER AD102
The data presents a stark generational and performance chasm. The NVIDIA GeForce RTX 4070 Ti SUPER AD102 and the NVIDIA GeForce MX230 are not competitors in any practical sense; they represent opposite ends of the GPU spectrum. The RTX 4070 Ti SUPER is a high-end desktop card from the Ada Lovelace era, while the MX230 is a low-power mobile chip from the Pascal generation. This analysis will quantify the differences using the available benchmark data, focusing on architectural, specification, and performance deltas.
Head-to-Head Benchmarks
Direct head-to-head benchmark comparisons are not available in the provided data. However, the aggregate benchmark scores and percentile rankings offer a clear picture of relative performance. The RTX 4070 Ti SUPER AD102 has an average benchmark score of 6270. The MX230 has an average benchmark score of 6077. This yields a performance delta of approximately 3.2% in favor of the RTX 4070 Ti SUPER based on their average scores.
This small percentage difference is misleading due to the different benchmark suites used for each card. The RTX 4070 Ti SUPER's score comes from a single demanding test: 3DMark Steel Nomad (DX12), where it scored 6269.5. The MX230's score is derived from two less graphically intensive tests: Geekbench OpenCL (5739) and Geekbench Vulkan (6414). The MX230's average is pulled up by its Vulkan score, which is not directly comparable to the 3DMark result.
When examining the nearest rivals, the positioning becomes clearer. The RTX 4070 Ti SUPER is benchmarked against the NVIDIA GeForce RTX 5070 Ti SUPER, with a deltaPct of 0. This indicates the 4070 Ti SUPER and its newer counterpart perform identically in the 3DMark Steel Nomad test. It also sits near the AMD FirePro W600, which it beats by 0.8%. The MX230's closest rival is the NVIDIA RTX A400, with a deltaPct of 0, and it slightly outperforms the AMD Radeon 760M by 1%.
The most telling statistic is the percentile ranking. The RTX 4070 Ti SUPER sits in the 36th percentile of all GPUs, while the MX230 sits in the 35th percentile. Despite the massive chasm in raw compute power and features, their percentile rankings are nearly identical, suggesting that both cards are in the middle of the pack when considering the entire historical database of GPUs. However, this is where the similarity ends. The RTX 4070 Ti SUPER's score is from a 2024-era, high-resolution DirectX 12 test, while the MX230's scores are from lighter, API-agnostic compute tests. The data strongly suggests the RTX 4070 Ti SUPER is in a completely different performance class, with its 3DMark score representing a workload that the MX230 would likely be unable to run at playable settings.
Where Each One Wins
Based on the benchmark data, the RTX 4070 Ti SUPER AD102 is the clear winner in high-end, modern gaming and professional 3D rendering. Its single 3DMark Steel Nomad score of 6269.5 reflects its ability to handle the latest DirectX 12 Ultimate workloads. The card is built for demanding tasks that require massive memory bandwidth and raw compute throughput.
The MX230, conversely, shows wins in lighter, cross-platform compute benchmarks. Its Geekbench Vulkan score of 6414 is notably higher than its OpenCL score of 5739. This suggests it has adequate performance for basic media acceleration, light photo editing, or older games where its 2 GB of GDDR5 memory is sufficient. Its TDP of 10 W and IGP slot width indicate it is designed for ultra-portable laptops where battery life and heat are paramount, not for sustained high-performance workloads.
The data shows no overlap in their intended use cases. The RTX 4070 Ti SUPER wins in any scenario that involves modern AAA gaming at high resolutions, ray tracing, or 3D content creation. The MX230 wins in scenarios where power efficiency is the primary concern and the workload is limited to basic 2D acceleration or very light 3D tasks. There are no benchmark wins for the MX230 that would suggest it can compete with the RTX 4070 Ti SUPER in any demanding application.
The Verdict
The data dictates that these are not alternative choices; they are for entirely different systems and users. The NVIDIA GeForce RTX 4070 Ti SUPER AD102 is the undisputed choice for a desktop PC builder targeting high-performance gaming or professional visualization. Its 3DMark Steel Nomad score of 6269.5, which matches the newer RTX 5070 Ti SUPER, demonstrates its relevance for demanding modern titles. Its massive 16 GB memory pool and 672.3 GB/s bandwidth are essential for high-resolution textures and complex scenes.
The NVIDIA GeForce MX230 is the appropriate choice for an ultra-thin, power-efficient laptop where its 10 W TDP is a critical feature. Its benchmark scores in Geekbench (5739 OpenCL, 6414 Vulkan) show it can handle basic tasks, but its 2 GB of memory and 48.06 GB/s bandwidth are severe bottlenecks. No user should pick the MX230 expecting performance anywhere near the RTX 4070 Ti SUPER. The choice is not between two GPUs, but between a high-performance desktop component and a low-power mobile chip. The data shows the RTX 4070 Ti SUPER is a formidable performer in its class, while the MX230 is a basic utility component.
FAQ
Q: How much faster is the RTX 4070 Ti SUPER AD102 than the MX230?
A: Based on their average benchmark scores, the RTX 4070 Ti SUPER (6270) is about 3.2% higher than the MX230 (6077). However, this comparison is not apples-to-apples, as the RTX 4070 Ti SUPER's score comes from the demanding 3DMark Steel Nomad test, while the MX230's comes from lighter Geekbench tests.
Q: Which GPU has a higher percentile ranking?
A: The RTX 4070 Ti SUPER AD102 is in the 36th percentile of all GPUs, while the MX230 is in the 35th percentile. Their rankings are nearly identical despite the massive performance difference, due to the different benchmark suites used.
Q: What is the MX230's best benchmark result?
A: The MX230's best score is its Geekbench Vulkan score of 6414. Its OpenCL score is lower at 5739.
Q: How does the RTX 4070 Ti SUPER compare to its nearest rival?
A: The RTX 4070 Ti SUPER's average score of 6270 is identical to the NVIDIA GeForce RTX 5070 Ti SUPER, with a deltaPct of 0. It also beats the AMD FirePro W600 by 0.8%.
Q: What is the RTX 4070 Ti SUPER's benchmark score in 3DMark Steel Nomad?
A: The RTX 4070 Ti SUPER AD102 scores 6269.5 in the 3DMark Steel Nomad DX12 test. This is the only benchmark recorded for this card.
Q: What is the MX230's closest competitor?
A: The MX230's nearest rival is the NVIDIA RTX A400, which has a deltaPct of 0. The MX230 also slightly outperforms the AMD Radeon 760M, beating it by 1%.
Architecture Differences
The two GPUs are built on entirely different architectures and manufacturing processes. The RTX 4070 Ti SUPER AD102 is based on the Ada Lovelace architecture, built on a 5 nm process at TSMC. It contains a massive 76,300 million transistors on a 609 mm² die. In contrast, the MX230 uses the older Pascal architecture, built on a 14 nm process at Samsung. It has only 1,800 million transistors on a 74 mm² die.
These architectural differences lead to major feature disparities. The RTX 4070 Ti SUPER includes 66 ray tracing cores and 264 tensor cores, enabling hardware-accelerated ray tracing and AI features like DLSS. The MX230 has no dedicated ray tracing or tensor cores. The RTX 4070 Ti SUPER also supports DirectX 12 Ultimate (12_2), while the MX230 is limited to DirectX 12 (12_1). Both support OpenGL 4.6 and Vulkan 1.4.
The compute capabilities are drastically different. The RTX 4070 Ti SUPER delivers 44.10 TFLOPS of FP32 performance and the same 44.10 TFLOPS for FP16 (1:1 ratio). The MX230 delivers just 783.9 GFLOPS of FP32 and a paltry 12.25 GFLOPS of FP16, with a highly asymmetric 1:64 ratio. This means the RTX 4070 Ti SUPER is over 56 times faster in FP32 compute and over 3600 times faster in FP16 compute.
Specification Differences
The specification sheets for these two GPUs reveal a total divergence in design goals. The RTX 4070 Ti SUPER AD102 has a TDP of 285 W and requires a 600 W power supply with a 1x 16-pin power connector. It is a triple-slot card. The MX230, by contrast, has a TDP of just 10 W and is an IGP (Integrated Graphics Processor) with no power connectors and no suggested PSU.
The memory subsystems are completely different. The RTX 4070 Ti SUPER has 16 GB of GDDR6X memory on a 256-bit bus, yielding a bandwidth of 672.3 GB/s. The MX230 has 2 GB of GDDR5 memory on a 64-bit bus, with a bandwidth of only 48.06 GB/s. The RTX 4070 Ti SUPER has 8448 shading units, 264 TMUs, and 96 ROPs, compared to the MX230's 256 shading units, 16 TMUs, and 16 ROPs.
The bus interface also differs: the RTX 4070 Ti SUPER uses PCIe 4.0 x16, while the MX230 uses a more limited PCIe 3.0 x4. The RTX 4070 Ti SUPER has a physical footprint of 310 mm in length, while the MX230 has no listed dimensions as it is a mobile chip. The RTX 4070 Ti SUPER offers 1x HDMI 2.1 and 3x DisplayPort 1.4a outputs, while the MX230's display outputs are "Portable Device Dependent." The RTX 4070 Ti SUPER has a launch MSRP of 799 USD, while the MX230 has no listed launch MSRP. The clock speeds also differ significantly, with the RTX 4070 Ti SUPER boosting to 2610 MHz and the MX230 boosting to 1531 MHz.