NVIDIA GeForce GTX 860M vs NVIDIA RTX PRO 4000 Blackwell SFF Comparison
NVIDIA GeForce GTX 860M
RTX PRO 4000 Blackwell SFF
PERFORMANCE BENCHMARKS
Analysis: NVIDIA GeForce GTX 860M vs NVIDIA RTX PRO 4000 Blackwell SFF
# NVIDIA GeForce GTX 860M vs NVIDIA RTX PRO 4000 Blackwell SFF
The NVIDIA GeForce GTX 860M and NVIDIA RTX PRO 4000 Blackwell SFF represent two vastly different eras of GPU design, separated by more than a decade of architectural evolution. The GTX 860M, a 2014 mobile Kepler part, and the RTX PRO 4000 Blackwell SFF, a 2025 active workstation card, share a similar aggregate benchmark percentile (both at 19th percentile vs all GPUs) but achieve this through entirely different means. The GTX 860M relies on a broad set of legacy DirectX benchmarks, while the RTX PRO 4000 Blackwell SFF posts a single modern 3DMark result. This comparison highlights how benchmark selection drastically alters perceived performance parity.
Where Each One Wins
The GTX 860M dominates in legacy DirectX benchmark scenarios. Its PassMark scores for DirectX 9, 10, 11, and 12 are 55, 15, 23, and 13, respectively. These numbers, while low in absolute terms, represent the full set of the GTX 860M's benchmark portfolio. The RTX PRO 4000 Blackwell SFF has no corresponding legacy DirectX benchmark results in the data, meaning the GTX 860M wins every head-to-head comparison where those tests are the metric. The GTX 860M also shows strength in compute-oriented workloads, with a PassMark GPU Compute score of 1251 and Geekbench OpenCL score of 10461.
The RTX PRO 4000 Blackwell SFF wins in the only benchmark it shares with any comparable data: 3DMark Steel Nomad DX12, scoring 2910. This is a modern, DirectX 12 Ultimate workload that leverages the Blackwell architecture's full feature set, including hardware ray tracing and tensor cores. The GTX 860M has no corresponding 3DMark result. The RTX PRO 4000 Blackwell SFF also wins on memory capacity and bandwidth, with 24 GB of GDDR7 versus 2 GB of GDDR5, and 432.0 GB/s versus 80.00 GB/s. For any workload that scales with memory size or bandwidth, the RTX PRO 4000 Blackwell SFF is the clear winner. The GTX 860M's wins are confined to older APIs and lower-resolution legacy benchmarks, while the RTX PRO 4000 Blackwell SFF excels in modern, feature-rich workloads.
Architecture Differences
The architectural gap between these two GPUs is immense. The GTX 860M uses the GK104 chip on the Kepler architecture, fabricated on a 28 nm process at TSMC. It contains 3,540 million transistors on a 294 mm² die, yielding a transistor density of 12.0M per mm². The RTX PRO 4000 Blackwell SFF uses the GB203 chip on the Blackwell 2.0 architecture, also from TSMC, but on a 5 nm process. This chip packs 45,600 million transistors onto a 378 mm² die, achieving a density of 120.6M per mm² — exactly 10 times the density of the Kepler part. The Blackwell chip has nearly 13 times more transistors in only 28% more die area.
Core configuration differences are equally stark. The GTX 860M has 1,152 shading units, 96 TMUs, and 16 ROPs. The RTX PRO 4000 Blackwell SFF has 8,960 shading units, 280 TMUs, and 96 ROPs. That is 7.8 times more shading units, 2.9 times more TMUs, and 6 times more ROPs. Critically, the RTX PRO 4000 Blackwell SFF adds hardware features the GTX 860M lacks entirely: 70 RT cores and 280 tensor cores. The Kepler part has no ray tracing or tensor acceleration. The Blackwell GPU also supports DirectX 12 Ultimate (12_2), while the GTX 860M is limited to DirectX 12 (11_0). Vulkan support jumps from 1.2.175 on Kepler to 1.4 on Blackwell, while OpenGL remains at 4.6 for both.
Head-to-Head Benchmarks
Direct benchmark comparisons are limited because the two GPUs share no common test results in the data. The GTX 860M has ten benchmark scores spanning Geekbench and PassMark suites. The RTX PRO 4000 Blackwell SFF has a single 3DMark Steel Nomad DX12 score of 2910. However, we can compare their aggregate benchmark scores and nearest rivals to contextualize performance.
The GTX 860M's average benchmark score is 2967. Its nearest rivals include the NVIDIA GeForce GTX 750 Ti (average score 2953, deltaPct 0.5), the NVIDIA GeForce 820A (average score 2983, deltaPct -0.5), the NVIDIA Quadro P600 (average score 2923, deltaPct 1.5), and the NVIDIA GeForce RTX 4060 Ti 8 GB (average score 2913, deltaPct 1.9). The GTX 860M is just 0.5% ahead of the GTX 750 Ti and 1.9% ahead of the RTX 4060 Ti 8 GB. This clustering suggests that the GTX 860M's legacy benchmark suite produces scores comparable to a modern mid-range card, despite the massive architectural differences.
The RTX PRO 4000 Blackwell SFF's average benchmark score is 2910, based solely on its 3DMark result. Its nearest rivals are the NVIDIA GeForce RTX 4060 Ti 16 GB (average score 2907, deltaPct 0.1), the NVIDIA GeForce RTX 4060 Ti 8 GB (average score 2913, deltaPct -0.1), the NVIDIA Quadro P600 (average score 2923, deltaPct -0.4), and the NVIDIA GeForce RTX 4010 (average score 2893, deltaPct 0.6). The RTX PRO 4000 Blackwell SFF is essentially tied with the RTX 4060 Ti variants, within 0.1% in either direction. Both GPUs land in the 19th percentile of all GPUs, but this is misleading given the different benchmark suites. The GTX 860M's scores come from older, less demanding tests, while the RTX PRO 4000 Blackwell SFF's score comes from a modern DX12 workload. In a direct comparison, the RTX PRO 4000 Blackwell SFF's 2910 in Steel Nomad is a far more demanding test than anything the GTX 860M's suite includes.
Specification Differences
The specification differences between these two GPUs are extensive. The GTX 860M has a base clock of 797 MHz and a boost clock of 915 MHz, while the RTX PRO 4000 Blackwell SFF has a base clock of 405 MHz and a boost clock of 1342 MHz. The Blackwell part has a dramatically lower base clock but a 46% higher boost clock. Memory speed differs significantly: the GTX 860M runs GDDR5 at 1250 MHz (5 Gbps effective), while the RTX PRO 4000 Blackwell SFF runs GDDR7 at 1125 MHz (18 Gbps effective). The effective memory speed is 3.6 times higher on the Blackwell card.
Memory capacity and bus width are major differentiators. The GTX 860M has 2 GB on a 128-bit bus, yielding 80.00 GB/s bandwidth. The RTX PRO 4000 Blackwell SFF has 24 GB on a 192-bit bus, yielding 432.0 GB/s. That is 12 times more memory and 5.4 times more bandwidth. Pixel rate jumps from 21.96 GPixel/s on Kepler to 128.8 GPixel/s on Blackwell — a 5.9 times increase. Texture rate increases from 87.84 GTexel/s to 375.8 GTexel/s, a 4.3 times difference. FP32 compute rises from 2.108 TFLOPS to 24.05 TFLOPS, an 11.4 times improvement. The RTX PRO 4000 Blackwell SFF also supports FP16 at 24.05 TFLOPS with a 1:1 ratio, while the GTX 860M has no listed FP16 capability.
Power and physical specifications differ substantially. The GTX 860M has a TDP of 75 W and is an IGP (integrated graphics processor) with no power connectors, designed for portable devices with display output described as "Portable Device Dependent." The RTX PRO 4000 Blackwell SFF has a lower TDP of 70 W, is a dual-slot card, also has no power connectors, but requires a 250 W suggested PSU. It has a PCIe 5.0 x8 interface versus the GTX 860M's PCIe 3.0 x16. The RTX PRO 4000 Blackwell SFF measures 167 mm in length, 69 mm in height, and 40 mm in width, with four mini-DisplayPort 2.1b outputs. The GTX 860M has no listed dimensions. Production status differs: the GTX 860M is end-of-life, released 2014-03-09, while the RTX PRO 4000 Blackwell SFF is active, released 2025-08-10.
FAQ
Q: Which GPU has more shading units?
A: The RTX PRO 4000 Blackwell SFF has 8,960 shading units, which is 7.8 times more than the GTX 860M's 1,152 shading units.
Q: Does the GTX 860M support ray tracing?
A: No. The GTX 860M has no RT cores listed, while the RTX PRO 4000 Blackwell SFF includes 70 RT cores and 280 tensor cores.
Q: How much memory does each GPU have?
A: The GTX 860M has 2 GB of GDDR5 on a 128-bit bus, while the RTX PRO 4000 Blackwell SFF has 24 GB of GDDR7 on a 192-bit bus.
Q: Which GPU has a higher average benchmark score?
A: The GTX 860M has an average benchmark score of 2967, while the RTX PRO 4000 Blackwell SFF has an average of 2910. However, these scores come from different benchmark suites, so direct comparison is not straightforward.
Q: What is the process node difference?
A: The GTX 860M uses a 28 nm process with 3,540 million transistors, while the RTX PRO 4000 Blackwell SFF uses a 5 nm process with 45,600 million transistors, achieving 10 times the transistor density.
Q: Which GPU has a higher memory bandwidth?
A: The RTX PRO 4000 Blackwell SFF has 432.0 GB/s bandwidth, which is 5.4 times higher than the GTX 860M's 80.00 GB/s.