NVIDIA GeForce GTX 760M vs NVIDIA GeForce RTX 5060 Ti 8 GB Comparison
NVIDIA GeForce GTX 760M
GeForce RTX 5060 Ti 8 GB
PERFORMANCE BENCHMARKS
Analysis: NVIDIA GeForce GTX 760M vs NVIDIA GeForce RTX 5060 Ti 8 GB
FAQ
Q: How do the two GPUs compare in raw compute performance?
A: The RTX 5060 Ti 8 GB delivers 23.70 TFLOPS of FP32 compute, while the GTX 760M manages 1,104.4 GFLOPS. That puts the newer card at roughly 21 times the raw shader throughput, a gap driven by its 4,608 shading units versus 768 on the older part.
Q: What is the memory bandwidth difference?
A: The RTX 5060 Ti 8 GB has 448.0 GB/s of bandwidth from its 8 GB GDDR7 memory on a 128-bit bus. The GTX 760M offers 64.13 GB/s from 2 GB GDDR5 on the same 128-bit bus width. The newer card moves data at nearly 7 times the rate.
Q: Which GPU supports newer graphics APIs?
A: The RTX 5060 Ti 8 GB supports DirectX 12 Ultimate (12_2), Vulkan 1.4, and OpenGL 4.6. The GTX 760M is limited to DirectX 12 (11_0), Vulkan 1.2.175, and OpenGL 4.6. The Blackwell card also adds 36 ray tracing cores and 144 tensor cores, neither of which exist on the Kepler part.
Q: How do their benchmark scores compare?
A: The GTX 760M scores 5,604 in Geekbench OpenCL and 4,868 in Geekbench Vulkan, averaging 5,236. The RTX 5060 Ti 8 GB scores 21,981 in Passmark G3D and 11,365 in Passmark GPU Compute, but its average benchmark score across all tests is 4,901. Note the two cards are tested under different benchmark suites, so direct cross-comparison is limited.
Q: What are the power and physical requirements?
A: The GTX 760M has a 55 W TDP and uses an MXM module form factor with no power connectors. The RTX 5060 Ti 8 GB has a 180 W TDP, is a dual-slot card measuring 241 mm in length, and requires a single 8-pin power connector with a suggested 450 W PSU.
Q: Which GPU is newer and what process node does it use?
A: The RTX 5060 Ti 8 GB launched on April 15, 2025, on TSMC's 5 nm process with 21,900 million transistors. The GTX 760M launched on May 29, 2013, on TSMC's 28 nm node with 2,540 million transistors. The newer card packs roughly 8.6 times more transistors into a smaller 181 mm² die versus 221 mm².
The Verdict
The data paints a clear picture: the RTX 5060 Ti 8 GB is in a completely different performance class. Its FP32 throughput of 23.70 TFLOPS dwarfs the GTX 760M's 1,104.4 GFLOPS. Memory bandwidth jumps from 64.13 GB/s to 448.0 GB/s. Texture rate scales from 46.02 GTexel/s to 370.4 GTexel/s. Pixel rate goes from 11.50 GPixel/s to 123.5 GPixel/s. Every measurable compute metric favors the newer card by a wide margin.
For gaming and modern workloads, the RTX 5060 Ti 8 GB is the only viable choice. It supports DirectX 12 Ultimate, Vulkan 1.4, ray tracing cores, and tensor cores — features the GTX 760M simply lacks. The 8 GB GDDR7 memory capacity is four times larger, and the 180 W TDP is reasonable for a desktop card with this level of performance.
The GTX 760M remains relevant only in legacy contexts. Its 55 W TDP and MXM form factor suit older laptops or embedded systems. Its Kepler architecture is end-of-life, and its DirectX 12 (11_0) support limits modern game compatibility. The GTX 760M's Geekbench OpenCL score of 5,604 is respectable for its era, but that era is over.
The RTX 5060 Ti 8 GB sits at the 29th percentile among all GPUs in the database, with its nearest rivals being the AMD FirePro W5130M (average 4,904, delta -0.1%), NVIDIA GeForce GTS 450 (average 4,893, delta 0.2%), and AMD Radeon R7 M265 (average 4,929, delta -0.6%). These are tight groupings, indicating the RTX 5060 Ti's average benchmark score of 4,901 places it in a dense performance cluster. The GTX 760M, at the 31st percentile, sits near the NVIDIA Quadro 4000M (average 5,211, delta 0.5%) and GeForce 940M (average 5,284, delta -0.9%).
For anyone building a new system, the RTX 5060 Ti 8 GB is the obvious pick. For anyone maintaining a vintage laptop, the GTX 760M is what it is — a capable-for-its-time mobile GPU that cannot be upgraded to modern standards. The two GPUs target entirely different markets and eras, and the data confirms the generational leap.
Head-to-Head Benchmarks
The head-to-head benchmark list between these two GPUs is empty, meaning there are no direct comparative test scores available. However, the individual benchmark results for each card tell the story.
The GTX 760M achieves 5,604 in Geekbench OpenCL and 4,868 in Geekbench Vulkan. These are synthetic compute tests that run on both mobile and desktop GPUs, and they show the Kepler part holding its own among its 2013 contemporaries. Its average benchmark score of 5,236 places it at the 31st percentile of all GPUs, with its closest rival being the NVIDIA GeForce GTX 980M at 5,308 (delta -1.3%) — a card that is itself a generation newer.
The RTX 5060 Ti 8 GB produces much larger raw numbers in its benchmark suite. In Passmark G3D, it scores 21,981 — a figure that reflects its modern architecture and 4,608 shading units. Its Passmark GPU Compute score of 11,365 shows strong general-purpose throughput. It also posts 3DMark Steel Nomad DX12 score of 4,019, which tests modern DirectX 12 rendering paths. The Passmark DirectX 9 score of 228 and DirectX 10 score of 142 are legacy API results, while DirectX 11 (220) and DirectX 12 (82) round out the suite.
The critical caveat is that the two cards are not measured under the same benchmark suite. The GTX 760M uses Geekbench, while the RTX 5060 Ti 8 GB uses Passmark and 3DMark. The average benchmark scores — 5,236 for the GTX 760M and 4,901 for the RTX 5060 Ti 8 GB — are not directly comparable across different tests. What is comparable is the percentile placement: both cards land near the 29-31% percentile range of all GPUs, but that reflects the distribution of tested GPUs, not relative performance between these two.
The specification-level deltas are more instructive. The RTX 5060 Ti 8 GB has 6 times the shading units (4,608 vs 768), 2.25 times the texture mapping units (144 vs 64), and 3 times the render output units (48 vs 16). Its boost clock of 2,572 MHz is 3.6 times the GTX 760M's 719 MHz. These are structural advantages that no benchmark suite can obscure.
Specification Differences
The two GPUs differ on nearly every specification field. The RTX 5060 Ti 8 GB uses the GB206 chip on Blackwell 2.0 architecture, built on TSMC's 5 nm process with 21,900 million transistors on a 181 mm² die. The GTX 760M uses the GK106S chip on Kepler architecture, built on TSMC's 28 nm process with 2,540 million transistors on a 221 mm² die. Transistor density jumps from 11.5M per mm² to 121.0M per mm² — a 10.5-fold increase.
Clock speeds differ dramatically. The GTX 760M runs at a 628 MHz base and 719 MHz boost. The RTX 5060 Ti 8 GB runs at 2,407 MHz base and 2,572 MHz boost. Memory clocks also diverge: the older card uses 1,002 MHz (4 Gbps effective) GDDR5, while the newer card uses 1,750 MHz (28 Gbps effective) GDDR7.
Memory configuration: 2 GB GDDR5 versus 8 GB GDDR7. Both use a 128-bit bus, but bandwidth goes from 64.13 GB/s to 448.0 GB/s. The RTX 5060 Ti 8 GB has 4,608 shading units, 144 TMUs, 48 ROPs, 36 ray tracing cores, and 144 tensor cores. The GTX 760M has 768 shading units, 64 TMUs, and 16 ROPs, with no RT or tensor cores.
Power and physical specs diverge completely. The GTX 760M is a 55 W MXM module with no power connectors, designed for portable devices with dependent display outputs. The RTX 5060 Ti 8 GB is a 180 W dual-slot card measuring 241 mm by 111 mm by 40 mm, requiring a single 8-pin connector and a suggested 450 W PSU, with 1x HDMI 2.1b and 3x DisplayPort 2.1b outputs.
The bus interface also differs: PCIe 3.0 x16 on the GTX 760M versus PCIe 5.0 x8 on the RTX 5060 Ti 8 GB. API support goes from DirectX 12 (11_0) and Vulkan 1.2.175 to DirectX 12 Ultimate (12_2) and Vulkan 1.4. Both support OpenGL 4.6.
Production status: the GTX 760M is end-of-life, while the RTX 5060 Ti 8 GB is active. Release dates are May 29, 2013, and April 15, 2025, respectively. The GTX 760M's predecessor is GeForce 600M and successor is GeForce 800M. The RTX 5060 Ti 8 GB's predecessor is GeForce 40 and successor is GeForce 60.
Architecture Differences
The architectural gap spans over a decade of GPU design evolution. The GTX 760M uses Kepler, a 2012-era architecture built on a 28 nm planar process. Kepler introduced unified shader architecture improvements but lacked hardware ray tracing and tensor core acceleration. The GK106S chip packs 2,540 million transistors into 221 mm², a density of 11.5M per mm².
The RTX 5060 Ti 8 GB uses Blackwell 2.0, a 2025 architecture on TSMC's 5 nm process. The GB206 chip crams 21,900 million transistors into just 181 mm², achieving a density of 121.0M per mm². This density increase — over 10 times — enables the massive jump in shading units (768 to 4,608) and the addition of dedicated hardware for ray tracing (36 RT cores) and AI acceleration (144 tensor cores).
Kepler's cache hierarchy and scheduler design were optimized for the shader-heavy workloads of the early 2010s. Blackwell 2.0 adds modern features like mesh shaders, variable rate shading, and hardware-accelerated ray tracing, all supported through DirectX 12 Ultimate. The GTX 760M's DirectX 12 (11_0) support means it can run some DX12 titles but only at the feature level of DX11, missing many modern rendering paths.
The memory subsystem also reflects architectural evolution. GDDR5 on the GTX 760M operates at 4 Gbps effective, while GDDR7 on the RTX 5060 Ti 8 GB runs at 28 Gbps effective — a 7-fold increase in per-pin data rate. The 128-bit bus remains constant, but the newer memory technology delivers 448.0 GB/s versus 64.13 GB/s.
Compute capabilities differ fundamentally. The GTX 760M's FP32 throughput of 1,104.4 GFLOPS was solid for 2013 mobile gaming. The RTX 5060 Ti 8 GB's 23.70 TFLOPS FP32, with matching 23.70 TFLOPS FP16 (1:1 ratio), enables modern AI-assisted rendering and compute workloads. The older card has no FP16 support listed, limiting its use in half-precision applications.
The pixel rate scales from 11.50 GPixel/s to 123.5 GPixel/s, and texture rate from 46.02 GTexel/s to 370.4 GTexel/s. These are direct consequences of having more ROPs (16 to 48) and TMUs (64 to 144), combined with higher clock speeds.
Finally, the process node difference — 28 nm to 5 nm — explains the efficiency story. The RTX 5060 Ti 8 GB delivers roughly 21 times the FP32 compute while consuming only 3.3 times the power (180 W vs 55 W). The architectural and process improvements enable this efficiency gain, making the newer card dramatically more performant per watt.