NVIDIA GeForce GTX 680M vs NVIDIA RTX PRO 5000 72 GB Blackwell Comparison

NVIDIA
GEFORCE

NVIDIA GeForce GTX 680M

CORE STATE GK104
VRAM 4 GB
CLOCK SPEED 758 MHz
TDP 100 W
BUS WIDTH 256 bit
ARCHITECTURE Kepler
nm
PROCESS 28 nm
LAUNCH DATE 2012
VS
NVIDIA
GEFORCE

RTX PRO 5000 72 GB Blackwell

CORE STATE GB202
VRAM 72 GB
CLOCK SPEED 2377 MHz
TDP 300 W
BUS WIDTH 384 bit
ARCHITECTURE Blackwell 2.0
nm
PROCESS 5 nm
LAUNCH DATE 2025

PERFORMANCE BENCHMARKS

geekbench_metal
4,815
N/A
geekbench_opencl
9,230
N/A
3dmark_3dmark_steel_nomad_dx12
N/A
9,579.5
passmark_directx_10
N/A
175
passmark_directx_11
N/A
219
passmark_directx_12
N/A
78
passmark_directx_9
N/A
311
passmark_g2d
N/A
914
passmark_g3d
N/A
24,310
passmark_gpu_compute
N/A
15,667

Analysis: NVIDIA GeForce GTX 680M vs NVIDIA RTX PRO 5000 72 GB Blackwell

The NVIDIA GeForce GTX 680M and the NVIDIA RTX PRO 5000 72 GB Blackwell represent two entirely different eras of mobile and professional graphics, separated by over a decade of architectural evolution. The GTX 680M is a 2012-era Kepler part designed for high-end laptops, while the RTX PRO 5000 is a 2025 Blackwell workstation behemoth built for compute and AI workloads. Their benchmark profiles reveal a stark contrast: the older card posts a higher average score in generic legacy tests, while the newer card dominates in modern, feature-rich workloads. This analysis breaks down exactly where each GPU wins, why their architectures diverge so completely, and what the raw numbers mean in context.

Where Each One Wins

The data paints a clear picture of two different performance universes. The GTX 680M achieves a higher overall average benchmark score of 7,023, placing it in the 39th percentile of all GPUs. In contrast, the RTX PRO 5000 72 GB Blackwell has a lower average score of 6,407, sitting at the 37th percentile. This is a counterintuitive result, but it stems from the types of tests each card excels at. The GTX 680M’s wins come from legacy and lightweight benchmarks: it scores 4,815 in Geekbench Metal and 9,230 in Geekbench OpenCL. These tests are heavily weighted toward older architectures and do not stress the modern features of the Blackwell card.

The RTX PRO 5000, meanwhile, wins decisively in every modern graphics and compute scenario. Its standout result is a 9,579.5 score in 3DMark Steel Nomad DX12, a test that the GTX 680M cannot even attempt due to its lack of DirectX 12 Ultimate support. In Passmark, the Blackwell card delivers 24,310 in G3D and 15,667 in GPU Compute. These are massive wins that dwarf the GTX 680M’s capabilities. However, the RTX PRO 5000 posts bizarrely low scores in Passmark DirectX 10 (175) and DirectX 12 (78), while scoring 311 in DirectX 9 and 219 in DirectX 11. These low legacy scores drag down its average significantly, making the overall numbers misleading without context.

The use-case split is unambiguous. The GTX 680M is the winner for anyone running older DirectX 9/10/11 titles or basic OpenCL compute tasks. The RTX PRO 5000 is the definitive winner for modern DirectX 12 workloads, high-end 3D rendering, and GPU-accelerated compute, where its raw throughput and feature set overwhelm the older part. The data suggests the GTX 680M’s higher average is an artifact of benchmark selection, not real-world superiority.

Architecture Differences

The architectural gap between these two GPUs is generational, not incremental. The GTX 680M uses the GK104 chip built on a 28 nm TSMC process, packing 3,540 million transistors into a 294 mm² die. This yields a transistor density of 12.0M per mm². The RTX PRO 5000 uses the GB202 chip on a 5 nm TSMC process, with 92,200 million transistors crammed into a 750 mm² die, achieving a density of 122.9M per mm². That is a 10x improvement in transistor density, enabling vastly more complex silicon.

Core counts tell the story of specialization. The GTX 680M has 1,344 shading units, 112 TMUs, and 32 ROPs. The RTX PRO 5000 has 14,080 shading units, 440 TMUs, and 160 ROPs — 10.5x more shading units and 5x more ROPs. Crucially, the Blackwell card adds 110 RT cores and 440 tensor cores, which are entirely absent from the Kepler chip. These dedicated units power ray tracing and AI acceleration, features the GTX 680M cannot emulate.

Clock speeds and memory also diverge sharply. The GTX 680M runs at a base clock of 719 MHz with a boost of 758 MHz, while the RTX PRO 5000 runs at 1,740 MHz base and 2,377 MHz boost. The memory subsystem is even more disparate: the GTX 680M uses 4 GB of GDDR5 on a 256-bit bus, delivering 115.2 GB/s. The RTX PRO 5000 uses 72 GB of GDDR7 on a 384-bit bus, delivering 1.34 TB/s — nearly 12x the bandwidth. Pixel and texture rates follow suit: the Blackwell card hits 380.3 GPixel/s and 1,045.9 GTexel/s, versus 21.22 GPixel/s and 84.90 GTexel/s for the Kepler part.

The feature set differences are profound. The GTX 680M supports DirectX 12 (11_0), OpenGL 4.6, and Vulkan 1.2.175. The RTX PRO 5000 supports DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4. The newer card also uses PCIe 5.0 x16, while the older one uses MXM-B (3.0). Power draw scales accordingly: 100 W for the GTX 680M versus 300 W for the RTX PRO 5000, with the latter requiring a 700 W power supply and a 16-pin connector.

FAQ

Q: Why does the older GTX 680M have a higher average benchmark score than the newer RTX PRO 5000?

A: The GTX 680M scores 7,023 on average, while the RTX PRO 5000 scores 6,407. This is because the GTX 680M performs well in Geekbench Metal (4,815) and OpenCL (9,230), while the RTX PRO 5000 has anomalously low Passmark DirectX scores (78 in DX12, 175 in DX10) that pull its average down, despite winning massively in other tests.

Q: Which card is better for modern DirectX 12 gaming?

A: The RTX PRO 5000 is vastly superior. It scores 9,579.5 in 3DMark Steel Nomad DX12, a test the GTX 680M cannot run due to its DirectX 12 (11_0) support. The GTX 680M lacks DirectX 12 Ultimate features like ray tracing and mesh shaders.

Q: How do the memory capacities compare?

A: The RTX PRO 5000 has 72 GB of GDDR7 memory on a 384-bit bus, delivering 1.34 TB/s of bandwidth. The GTX 680M has 4 GB of GDDR5 on a 256-bit bus, delivering 115.2 GB/s. The Blackwell card offers 18x the capacity and nearly 12x the bandwidth.

Q: Does the GTX 680M support ray tracing or AI acceleration?

A: No. The GTX 680M has no RT cores or tensor cores. The RTX PRO 5000 includes 110 RT cores and 440 tensor cores, enabling hardware-accelerated ray tracing and AI compute workloads.

Q: What are the power requirements for each card?

A: The GTX 680M has a 100 W TDP and uses an MXM module with no power connectors. The RTX PRO 5000 has a 300 W TDP, requires a 700 W power supply, and uses a single 16-pin power connector.

Q: Which card has better compute performance for professional workloads?

A: The RTX PRO 5000 dominates in compute, with 66.94 TFLOPS of FP32 and FP16 performance (1:1 ratio). The GTX 680M offers only 2.038 TFLOPS of FP32 and no FP16 support, making it unsuitable for modern AI or scientific workloads.

Specification Differences

The two cards differ in nearly every measurable specification. The process node is 28 nm for the GTX 680M versus 5 nm for the RTX PRO 5000, with transistor counts of 3,540 million and 92,200 million respectively. Die size is 294 mm² versus 750 mm², and transistor density is 12.0M/mm² versus 122.9M/mm².

Clock speeds: the GTX 680M has a 719 MHz base and 758 MHz boost, while the RTX PRO 5000 has a 1,740 MHz base and 2,377 MHz boost. Memory: 4 GB GDDR5 versus 72 GB GDDR7. Bus width is 256-bit versus 384-bit, and bandwidth is 115.2 GB/s versus 1.34 TB/s.

Core configuration: the GTX 680M has 1,344 shading units, 112 TMUs, and 32 ROPs, with no RT or tensor cores. The RTX PRO 5000 has 14,080 shading units, 440 TMUs, 160 ROPs, 110 RT cores, and 440 tensor cores. Pixel rate is 21.22 GPixel/s versus 380.3 GPixel/s, and texture rate is 84.90 GTexel/s versus 1,045.9 GTexel/s. FP32 compute is 2.038 TFLOPS versus 66.94 TFLOPS, with FP16 support only on the Blackwell card.

Power and physical specs: TDP is 100 W versus 300 W, slot width is MXM Module versus Dual-slot, and power connectors are None versus 1x 16-pin. The RTX PRO 5000 also specifies a 700 W suggested PSU. Bus interface is MXM-B (3.0) versus PCIe 5.0 x16, and display outputs are Portable Device Dependent versus 4x DisplayPort 2.1b. The RTX PRO 5000 has physical dimensions of 267 mm length, 111 mm height, and 40 mm width. API support differs, with DirectX 12 (11_0) versus 12 Ultimate (12_2), and Vulkan 1.2.175 versus 1.4.

Head-to-Head Benchmarks

There are no direct head-to-head benchmark results in the data, so comparisons must be drawn from each card’s individual scores. The GTX 680M’s most impressive wins are in Geekbench tests. Its Geekbench OpenCL score of 9,230 is particularly strong, reflecting its Kepler architecture’s efficiency in legacy compute tasks. Its Geekbench Metal score of 4,815 also shows reasonable performance for its era. These scores place the GTX 680M near rivals like the NVIDIA T600 (7,035, -0.2% delta) and AMD Radeon R5 M240 (6,975, +0.7% delta).

The RTX PRO 5000’s wins are far more dramatic. Its 3DMark Steel Nomad DX12 score of 9,579.5 is a generational leap, demonstrating its ability to handle modern graphics APIs with features like ray tracing that the GTX 680M lacks entirely. In Passmark G3D, the Blackwell card scores 24,310, a figure that dwarfs anything the Kepler chip could produce. Its Passmark GPU Compute score of 15,667 further underscores its compute superiority.

The oddity in the data is the RTX PRO 5000’s Passmark DirectX legacy scores. It scores 311 in DirectX 9, 219 in DirectX 11, 175 in DirectX 10, and just 78 in DirectX 12. These are far below what would be expected, and they contribute to its low average score of 6,407. This places it near rivals like the NVIDIA GeForce GTX 460 SE (6,389, +0.3% delta) and NVIDIA GeForce GTX 580M (6,389, +0.3% delta), which are ancient parts by comparison. The GTX 680M, with its average of 7,023, sits near the GeForce GTX 970 (7,157, -1.9% delta).

The interpretation is clear: the RTX PRO 5000’s low legacy DX scores are a measurement artifact, not a reflection of real performance. In any modern workload, the Blackwell card is orders of magnitude faster. The GTX 680M’s higher average is a quirk of benchmark weighting, not a sign of real-world competitiveness. The data shows that the RTX PRO 5000 wins every meaningful modern benchmark by a wide margin, while the GTX 680M only holds its own in decade-old tests.

DETAILED SPECIFICATIONS

SPECIFICATION
GTX 680M
RTX PRO 5000 72 GB Blackwell
Core Specs
Shading Units
1,344
14,080 +947.6%
Shaders
1,344
14,080 +947.6%
TMUs
112
440 +292.9%
ROPs
32
160 +400.0%
SM Count
—
110
Clocks
Base Clock
719 MHz
1740 MHz
Boost Clock
758 MHz
2377 MHz
Memory Clock
900 MHz 3.6 Gbps effective
1750 MHz 28 Gbps effective
Memory
Memory Size
4 GB
72 GB
VRAM (MB)
4,096
73,728 +1700.0%
Memory Type
GDDR5
GDDR7
Memory Bus
256 bit
384 bit
Bandwidth
115.2 GB/s
1.34 TB/s
Cache
L1 Cache
16 KB (per SMX)
128 KB (per SM)
L2 Cache
512 KB
96 MB
Performance
Pixel Rate
21.22 GPixel/s
380.3 GPixel/s
Texture Rate
84.90 GTexel/s
1,045.9 GTexel/s
FP32 (TFLOPS)
2.038 TFLOPS
66.94 TFLOPS
FP64 (TFLOPS)
84.90 GFLOPS (1:24)
1,045.9 GFLOPS (1:64)
FP16 (TFLOPS)
—
66.94 TFLOPS (1:1)
AI/RT
RT Cores
—
110
Tensor Cores
—
440
Power
TDP
100 W
300 W
TDP (W)
100
300 +200.0%
Suggested PSU
—
700 W
Power Connectors
None
1x 16-pin
Architecture
Architecture
Kepler
Blackwell 2.0
GPU Name
GK104
GB202
Generation
GeForce 600M
Blackwell PRO W (x000)
Process Size
28 nm
5 nm
Transistors
3,540 million
92,200 million
Die Size
294 mm²
750 mm²
Foundry
TSMC
TSMC
Density
12.0M / mm²
122.9M / mm²
API Support
DirectX
12 (11_0)
12 Ultimate (12_2)
OpenGL
4.6
4.6
Vulkan
1.2.175
1.4
OpenCL
3.0
3.0
CUDA
3.0
12.0
Shader Model
6.5 (5.1)
6.9
Physical
Slot Width
MXM Module
Dual-slot
Length
—
267 mm 10.5 inches
Height
—
111 mm 4.4 inches
Outputs
Portable Device Dependent
4x DisplayPort 2.1b
Bus Interface
MXM-B (3.0)
PCIe 5.0 x16
Other
Production
End-of-life
Active
Predecessor
GeForce 500M
Workstation Ada
Successor
GeForce 700M
—
View GeForce GTX 680M Details View RTX PRO 5000 72 GB Blackwell Details