NVIDIA GeForce GTX 675M vs NVIDIA RTX PRO 5000 72 GB Blackwell Comparison
NVIDIA GeForce GTX 675M
RTX PRO 5000 72 GB Blackwell
PERFORMANCE BENCHMARKS
Analysis: NVIDIA GeForce GTX 675M vs NVIDIA RTX PRO 5000 72 GB Blackwell
FAQ
Q: How does the GTX 675M compare to the RTX PRO 5000 in raw compute performance?
A: The RTX PRO 5000 delivers 66.94 TFLOPS of FP32 compute, while the GTX 675M delivers 952.3 GFLOPS. That puts the Blackwell card roughly 70 times ahead in raw floating-point throughput, a gap that reflects both the generational leap and the difference in market positioning.
Q: Which card has more memory, and does it matter for typical workloads?
A: The RTX PRO 5000 ships with 72 GB of GDDR7 on a 384-bit bus, yielding 1.34 TB/s of bandwidth. The GTX 675M has 2 GB of GDDR5 on a 256-bit bus, with 96.00 GB/s. The memory capacity difference alone (36x) makes the RTX PRO 5000 suitable for datasets that would not fit in the GTX 675M's frame buffer at all.
Q: What are the architectural generations, and how do they differ?
A: The GTX 675M is built on Fermi 2.0 (GF114 chip) using a 40 nm process from TSMC, with 1,950 million transistors on a 332 mm² die. The RTX PRO 5000 uses Blackwell 2.0 (GB202) on TSMC's 5 nm process, packing 92,200 million transistors into 750 mm². That is a transistor density of 122.9M per mm² versus 5.9M per mm² for the older card.
Q: Which card supports modern APIs like Vulkan and DirectX 12 Ultimate?
A: The RTX PRO 5000 supports DirectX 12 Ultimate (12_2) and Vulkan 1.4. The GTX 675M is limited to DirectX 12 (11_0) and has no Vulkan support listed. For modern titles and workloads that rely on these APIs, the RTX PRO 5000 is the only viable option of the two.
Q: How do the benchmark scores compare between the two cards?
A: The GTX 675M has a single Geekbench OpenCL score of 6,946, placing it at the 39th percentile. The RTX PRO 5000's average benchmark score is 6,407 across multiple tests, including a Passmark G3D score of 24,310 and a 3DMark Steel Nomad DX12 score of 9,579.5, yet it sits at the 37th percentile versus all GPUs.
Q: What is the physical form factor difference?
A: The GTX 675M is an MXM module (MXM-B 3.0 interface) with a 100 W TDP and no power connectors, designed for laptops. The RTX PRO 5000 is a dual-slot card measuring 267 mm by 111 mm by 40 mm, uses a single 16-pin power connector, and has a 300 W TDP with a suggested 700 W PSU.
The Verdict
The data presents an unusual pairing. The GTX 675M is a 2012-era mobile GPU, end-of-life, built for notebooks. The RTX PRO 5000 is an active workstation card from 2025, designed for desktop PCIe 5.0 x16 slots. There is no benchmark overlap in the head-to-head results, so direct performance comparison relies on the individual scores and specifications.
Pick the GTX 675M if you are maintaining or refurbishing an older laptop and need a drop-in MXM replacement. Its 100 W TDP and MXM-B form factor mean it fits systems that cannot accommodate anything larger or more power-hungry. It also carries a DirectX 12 (11_0) feature level, which is enough for older software titles.
Pick the RTX PRO 5000 if you need serious compute or memory capacity in a desktop workstation. The 72 GB VRAM, 1.34 TB/s bandwidth, and 66.94 TFLOPS FP32 throughput dwarf the older card's capabilities. It also supports ray tracing cores (110), tensor cores (440), and modern API levels, making it suitable for current professional workloads. The dual-slot cooler and 300 W TDP require a proper desktop chassis and power supply.
The percentile rankings are nearly identical (39th versus 37th), but that is misleading. The GTX 675M's percentile comes from a single OpenCL score among all GPUs; the RTX PRO 5000's percentile is dragged down by low Passmark DirectX 9/10/11/12 sub-scores (311, 175, 219, 78 respectively) that likely reflect driver or workload mismatches rather than raw capability. The G3D score of 24,310 and GPU compute score of 15,667 tell the real story: the RTX PRO 5000 is in a different class entirely.
Head-to-Head Benchmarks
There are no direct head-to-head benchmark entries in the data (headToHeadBenchmarks is empty), so we compare the available individual scores. The GTX 675M posts a Geekbench OpenCL score of 6,946. The RTX PRO 5000's Passmark G3D score is 24,310, which is roughly 3.5 times higher than the GTX 675M's overall average of 6,946. In GPU compute, the RTX PRO 5000 scores 15,667 on Passmark's compute test — more than double the older card's OpenCL result.
Where the RTX PRO 5000 appears weak is in older DirectX tests: Passmark DX9 yields 311, DX10 yields 175, DX11 yields 219, and DX12 yields 78. These are far below the GTX 675M's OpenCL score, but the tests measure different things; a modern workstation card may not optimize for legacy DirectX paths. The 3DMark Steel Nomad DX12 score of 9,579.5 is the more representative modern gaming/DX12 result, and it is strong.
The nearest rivals for the GTX 675M include the AMD Radeon R5 M240 (avg score 6,975, delta -0.4%), the NVIDIA GeForce GTX 680M (7,023, delta -1.1%), and the NVIDIA T600 (7,035, delta -1.3%). The AMD FirePro M5100 is behind at 6,830 (delta +1.7%). So the GTX 675M sits within 1.7% of its closest peers, meaning it is competitive with other mobile GPUs of its era.
For the RTX PRO 5000, nearest rivals include the NVIDIA GeForce GTX 460 SE (6,389, delta +0.3%), the GTX 580M (6,389, delta +0.3%), and the AMD Radeon Vega 10 Mobile (6,476, delta -1.1%). The NVIDIA Quadro M5000M is at 6,481 (delta -1.1%). These rival scores are all around 6,400–6,500, which is lower than the GTX 675M's 6,946 — yet the RTX PRO 5000's G3D and compute scores are far higher. This suggests the average benchmark figure for the RTX PRO 5000 is heavily skewed by the low legacy DirectX scores.
Specification Differences
The two cards differ in nearly every measurable specification. The GTX 675M has 384 shading units, 64 TMUs, and 32 ROPs. The RTX PRO 5000 has 14,080 shading units, 440 TMUs, and 160 ROPs. That is roughly 37x more shaders, 7x more TMUs, and 5x more ROPs.
Clock speeds: the GTX 675M has no listed base or boost clock, only a memory clock of 750 MHz (3 Gbps effective). The RTX PRO 5000 has a base clock of 1740 MHz and boost of 2377 MHz, with memory at 1750 MHz (28 Gbps effective).
Memory: 2 GB GDDR5 versus 72 GB GDDR7. Bus width: 256-bit versus 384-bit. Bandwidth: 96.00 GB/s versus 1.34 TB/s. Pixel rate: 9.920 GPixel/s versus 380.3 GPixel/s. Texture rate: 39.68 GTexel/s versus 1,045.9 GTexel/s. FP32: 952.3 GFLOPS versus 66.94 TFLOPS. FP16: not listed for the GTX 675M; the RTX PRO 5000 has 66.94 TFLOPS (1:1 ratio).
Power and physical: 100 W TDP versus 300 W TDP. MXM module versus dual-slot. No power connectors versus 1x 16-pin. MXM-B (3.0) interface versus PCIe 5.0 x16. Display outputs: "Portable Device Dependent" versus 4x DisplayPort 2.1b.
The RTX PRO 5000 also has 110 ray tracing cores and 440 tensor cores; the GTX 675M has none listed. Process node: 40 nm versus 5 nm. Transistors: 1,950 million versus 92,200 million. Die size: 332 mm² versus 750 mm². Production status: End-of-life versus Active. Release date: 2012-03-21 versus 2025-10-20.
Architecture Differences
The GTX 675M uses Fermi 2.0, a 2012-era architecture built on TSMC's 40 nm node. The GF114 die contains 1,950 million transistors across 332 mm², giving a transistor density of 5.9M per mm². It supports DirectX 12 (11_0) and OpenGL 4.6, but no Vulkan. There are no ray tracing or tensor cores. The memory subsystem is GDDR5 with a 256-bit bus.
The RTX PRO 5000 uses Blackwell 2.0, built on TSMC's 5 nm node. The GB202 die packs 92,200 million transistors into 750 mm², achieving a density of 122.9M per mm² — about 21 times denser than Fermi. It supports DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4. It includes 110 dedicated ray tracing cores and 440 tensor cores, enabling hardware-accelerated ray tracing and AI workloads. Memory is GDDR7 on a 384-bit bus.
The FP16 capability is a key architectural difference. The GTX 675M has no listed FP16 throughput, while the RTX PRO 5000 delivers 66.94 TFLOPS at FP16, matching its FP32 rate at a 1:1 ratio. This is significant for mixed-precision workloads common in AI inference and certain scientific computing tasks. The RTX PRO 5000 also uses a PCIe 5.0 x16 interface, which provides far more host bandwidth than the MXM-B 3.0 slot of the older card.
The display output architecture differs as well: the GTX 675M relies on the host laptop's display (portable device dependent), while the RTX PRO 5000 drives up to four DisplayPort 2.1b outputs, supporting high-resolution multi-monitor workstation setups.
Where Each One Wins
The GTX 675M wins in power efficiency and form factor compatibility. At 100 W TDP with no power connectors, it can operate in thin-and-light gaming laptops from 2012 that use MXM modules. It is also the only choice for anyone whose system has an MXM-B 3.0 slot — the RTX PRO 5000 will not physically fit. Its nearest rivals (GTX 680M at -1.1%, T600 at -1.3%) show it is competitive with other mobile GPUs of its generation, meaning it remains a serviceable option for legacy laptop repairs.
The RTX PRO 5000 wins in every raw performance category. It has 36x more memory, 14x more bandwidth, 70x more FP32 throughput, 38x higher pixel rate, and 26x higher texture rate. It wins on API support with DirectX 12 Ultimate and Vulkan 1.4. It wins on modern features with ray tracing and tensor cores. It wins on display connectivity with four DisplayPort 2.1b outputs. Its G3D score of 24,310 and GPU compute score of 15,667 confirm that it is a high-end workstation part.
The decision hinges on platform. If you have a 2012-era MXM laptop, the GTX 675M is the correct part, and its 6,946 OpenCL score places it within 1.3% of the GTX 680M, so it is not a weak performer for its class. If you have a modern desktop with PCIe 5.0 and a 700 W power supply, the RTX PRO 5000 is overwhelmingly more capable, and the 72 GB frame buffer opens workflows that the GTX 675M cannot even attempt. There is no scenario where both cards are valid for the same machine — they target completely different sockets, power envelopes, and workloads.