NVIDIA GeForce GTX 670M vs NVIDIA RTX PRO 5000 72 GB Blackwell Comparison
NVIDIA GeForce GTX 670M
RTX PRO 5000 72 GB Blackwell
PERFORMANCE BENCHMARKS
Analysis: NVIDIA GeForce GTX 670M vs NVIDIA RTX PRO 5000 72 GB Blackwell
NVIDIA’s GeForce GTX 670M and RTX PRO 5000 72 GB Blackwell sit at opposite ends of the GPU timeline, separated by over a decade of architectural evolution. The GTX 670M is an end-of-life mobile part from the Fermi 2.0 era, while the RTX PRO 5000 is an active workstation-class card built on Blackwell 2.0. The data available for direct comparison is sparse—the GTX 670M has a single OpenCL benchmark score, while the RTX PRO 5000 has a broader set of synthetic tests—but the specification sheets and percentile rankings reveal a clear divide in capability and intent.
Where Each One Wins
The GTX 670M’s single benchmark result is a Geekbench OpenCL score of 6,513, placing it at the 38th percentile of all GPUs. Its nearest rivals are the GT 555M (6,493, +0.3%), Quadro M5000M (6,481, +0.5%), and Vega 10 Mobile (6,476, +0.6%), with the Intel UHD Graphics P750 trailing slightly at 6,554 (-0.6%). This places the GTX 670M in a narrow band of mid-2010s mobile and entry-level desktop parts, where a 0.3% to 0.6% margin separates adjacent products. The data shows it wins by the thinnest of margins against its closest competitors, but it loses to the Intel integrated solution by 0.6%. Practically, this GPU wins in scenarios where legacy OpenCL workloads are the benchmark, and it edges out other mobile GPUs of its generation—but the wins are marginal, not transformative.
The RTX PRO 5000 presents a more complex picture. Its average benchmark score is 6,407, which is actually lower than the GTX 670M’s 6,513, yet its percentile ranking is 37—just one point below the GTX 670M’s 38. This counterintuitive result stems from the benchmark mix: the RTX PRO 5000’s PassMark G3D score is 24,310 and its GPU compute score is 15,667, but its DirectX 12 PassMark score is a lowly 78, and its DirectX 10 score is 175. The 3DMark Steel Nomad DX12 score of 9,579.5 is respectable, but the PassMark legacy DX9 and DX11 scores (311 and 219, respectively) drag the average down. The RTX PRO 5000 wins decisively in raw compute and modern graphics tests—its G3D score is over 3.7x the GTX 670M’s entire average—but it loses in any comparison that weights legacy DirectX performance. Its nearest rivals include the GTX 460 SE (6,389, +0.3%) and GTX 580M (6,389, +0.3%), with the Vega 10 Mobile and Quadro M5000M at -1.1% each. This means the RTX PRO 5000 wins narrowly against old mid-range cards, but its average is dragged down by inconsistent legacy scores.
In terms of use-case split, the GTX 670M wins in OpenCL-centric or legacy API scenarios where its Fermi architecture’s simpler pipeline avoids the RTX PRO 5000’s low DirectX 9/10/12 PassMark scores. The RTX PRO 5000 wins in any modern workload—compute, G3D rasterization, or Steel Nomad DX12—by orders of magnitude.
Architecture Differences
The two GPUs share a manufacturer but little else. The GTX 670M is built on the GF114 chip using Fermi 2.0 architecture, fabricated on TSMC’s 40 nm process. It packs 1,950 million transistors into a 332 mm² die, yielding a transistor density of 5.9M per mm². Its memory configuration is 1,536 MB of GDDR5 on a 192-bit bus, with 750 MHz memory clocks translating to 3 Gbps effective and 72.00 GB/s bandwidth. The GPU has 336 shading units, 56 TMUs, and 24 ROPs, with no ray tracing or tensor cores—those features did not exist in Fermi. Its pixel rate is 8.372 GPixel/s, texture rate is 33.49 GTexel/s, and FP32 performance is 803.7 GFLOPS. It supports DirectX 12 (11_0), OpenGL 4.6, but no Vulkan, and connects via an MXM-B (3.0) interface with no power connectors, drawing 75 W.
The RTX PRO 5000 is a radically different machine. It uses the GB202 chip on Blackwell 2.0 architecture, fabricated on TSMC’s 5 nm process. Transistors number 92,200 million—47x more than the GTX 670M—on a 750 mm² die, with a density of 122.9M per mm². Memory is 72 GB of GDDR7 on a 384-bit bus, with 1,750 MHz memory clocks (28 Gbps effective) yielding 1.34 TB/s bandwidth—over 18x the GTX 670M’s. Its 14,080 shading units, 440 TMUs, and 160 ROPs are complemented by 110 RT cores and 440 tensor cores. Pixel rate is 380.3 GPixel/s, texture rate is 1,045.9 GTexel/s, and FP32 is 66.94 TFLOPS, with FP16 at 66.94 TFLOPS (1:1). Base clock is 1,740 MHz with a 2,377 MHz boost. It supports DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4, and uses a PCIe 5.0 x16 interface with a 1x 16-pin power connector, drawing 300 W and requiring a 700 W PSU. It is a dual-slot card measuring 267 mm by 111 mm by 40 mm, with 4x DisplayPort 2.1b outputs.
Node, transistor count, memory type and size, core counts, and feature sets are all generations apart. The RTX PRO 5000’s RT and tensor cores are absent on the GTX 670M, and the FP16 capability is nonexistent on the older part.
The Verdict
Based strictly on the data, the RTX PRO 5000 is the superior GPU for any modern or compute-heavy task. Its G3D score of 24,310 is nearly four times the GTX 670M’s entire average benchmark score, and its GPU compute score of 15,667 is over twice the GTX 670M’s OpenCL result. The 3DMark Steel Nomad DX12 score of 9,579.5 further confirms its dominance in current-generation graphics. The GTX 670M’s only claim is its higher average score (6,513 vs. 6,407) and its +0.3% lead over the RTX PRO 5000’s closest rivals—but those averages are computed from incomparable benchmark sets. The GTX 670M wins only if the metric is the single Geekbench OpenCL test or if legacy DirectX performance is the sole criterion, which the RTX PRO 5000’s PassMark DX9 score of 311 and DX10 score of 175 do not support as a strength.
Who should pick which? A user constrained to a 2012-era mobile platform with an MXM slot and no external power would pick the GTX 670M, as it is the only physically compatible option. Anyone else—anyone with a PCIe 5.0 slot, a 700 W PSU, and a need for 72 GB of GDDR7, RT cores, or 66.94 TFLOPS—should pick the RTX PRO 5000. The data does not support any scenario where the GTX 670M is preferable on performance alone outside of its narrow legacy benchmark advantage.
FAQ
Q: Which GPU has the higher average benchmark score?
A: The GTX 670M has an average benchmark score of 6,513, which is higher than the RTX PRO 5000’s average of 6,407.
Q: How do their DirectX capabilities differ?
A: The GTX 670M supports DirectX 12 (11_0), while the RTX PRO 5000 supports DirectX 12 Ultimate (12_2). The RTX PRO 5000 also supports Vulkan 1.4, whereas the GTX 670M has no Vulkan support listed.
Q: What is the memory bandwidth difference?
A: The RTX PRO 5000 has 1.34 TB/s of bandwidth from 72 GB of GDDR7 on a 384-bit bus, while the GTX 670M has 72.00 GB/s from 1,536 MB of GDDR5 on a 192-bit bus.
Q: Does the RTX PRO 5000 have ray tracing capabilities?
A: Yes, the RTX PRO 5000 has 110 RT cores. The GTX 670M has no RT cores listed.
Q: What are the transistor counts?
A: The GTX 670M has 1,950 million transistors, while the RTX PRO 5000 has 92,200 million transistors.
Q: Which GPU has a higher FP32 performance?
A: The RTX PRO 5000 has 66.94 TFLOPS of FP32 performance, compared to the GTX 670M’s 803.7 GFLOPS.
Head-to-Head Benchmarks
There are no direct head-to-head benchmark entries in the data, so the comparison relies on individual scores. The GTX 670M’s only benchmark is Geekbench OpenCL at 6,513. The RTX PRO 5000’s strongest result is PassMark G3D at 24,310, which is 3.73x the GTX 670M’s entire average. Its GPU compute score of 15,667 is 2.41x the GTX 670M’s OpenCL score. The RTX PRO 5000’s 3DMark Steel Nomad DX12 score of 9,579.5 is not directly comparable to any GTX 670M test, but it indicates strong modern workload performance. Conversely, the RTX PRO 5000’s PassMark DirectX 12 score of 78 is catastrophically low, and its DirectX 9 score of 311 is also weak—these are the tests where the GTX 670M would likely win if it had scores for them, but it does not. The RTX PRO 5000’s PassMark G2D score of 914 further shows its 2D performance is respectable but not the headline number.
The biggest win for the RTX PRO 5000 is in G3D, where its 24,310 dwarfs the GTX 670M’s 6,513 by a factor of 3.73. The biggest win for the GTX 670M is its average score, which beats the RTX PRO 5000’s average by 1.65% (6,513 vs. 6,407). However, this is misleading because the averages are derived from different test suites. The data shows the RTX PRO 5000’s compute and G3D results are in a different class, while its legacy DirectX scores are anomalously low, possibly reflecting driver or test methodology issues rather than real-world capability. The GTX 670M’s single score is consistent with its nearest rivals, all within 0.6% of each other, indicating a stable, predictable performance envelope.
Specification Differences
The two GPUs differ in nearly every measurable specification. Process node: 40 nm (GTX 670M) vs. 5 nm (RTX PRO 5000). Transistors: 1,950 million vs. 92,200 million. Die size: 332 mm² vs. 750 mm². Transistor density: 5.9M / mm² vs. 122.9M / mm². Memory size: 1,536 MB vs. 72 GB. Memory type: GDDR5 vs. GDDR7. Memory bus: 192 bit vs. 384 bit. Bandwidth: 72.00 GB/s vs. 1.34 TB/s. Shading units: 336 vs. 14,080. TMUs: 56 vs. 440. ROPs: 24 vs. 160. RT cores: none vs. 110. Tensor cores: none vs. 440. Pixel rate: 8.372 GPixel/s vs. 380.3 GPixel/s. Texture rate: 33.49 GTexel/s vs. 1,045.9 GTexel/s. FP32: 803.7 GFLOPS vs. 66.94 TFLOPS. Memory clock: 750 MHz (3 Gbps effective) vs. 1,750 MHz (28 Gbps effective). Base clock: not listed vs. 1,740 MHz. Boost clock: not listed vs. 2,377 MHz. TDP: 75 W vs. 300 W. Slot width: MXM Module vs. Dual-slot. Power connectors: None vs. 1x 16-pin. Bus interface: MXM-B (3.0) vs. PCIe 5.0 x16. Display outputs: Portable Device Dependent vs. 4x DisplayPort 2.1b. DirectX: 12 (11_0) vs. 12 Ultimate (12_2). Vulkan: not listed vs. 1.4. Release date: 2012-03-21 vs. 2025-10-20. Production status: End-of-life vs. Active. Predecessor: GeForce 500M vs. Workstation Ada. Successor: GeForce 700M vs. none. The RTX PRO 5000 also has dimensions (267 mm x 111 mm x 40 mm) and a suggested PSU of 700 W, while the GTX 670M has neither. The only shared specifications are manufacturer (NVIDIA), OpenGL version (4.6), and the absence of a launch MSRP in the data.