NVIDIA GeForce GTX 560 Ti vs NVIDIA RTX PRO 6000 Blackwell Max-Q Comparison
NVIDIA GeForce GTX 560 Ti
RTX PRO 6000 Blackwell Max-Q
PERFORMANCE BENCHMARKS
Analysis: NVIDIA GeForce GTX 560 Ti vs NVIDIA RTX PRO 6000 Blackwell Max-Q
The NVIDIA RTX PRO 6000 Blackwell Max-Q and the NVIDIA GeForce GTX 560 Ti are separated by over a decade of GPU architecture, yet benchmark data places them in a strikingly similar performance percentile. The RTX PRO 6000 Blackwell Max-Q scores 11,088 in 3DMark Steel Nomad DX12, placing it in the 50th percentile of all GPUs, while the GTX 560 Ti scores 10,690 in Geekbench OpenCL, landing in the 49th percentile. Despite this statistical near-parity in their respective test suites, the two cards are built for entirely different workloads, with the RTX PRO 6000 Blackwell Max-Q representing a modern professional workstation solution and the GTX 560 Ti serving as an aging legacy gaming part.
Where Each One Wins
The RTX PRO 6000 Blackwell Max-Q wins decisively in every modern compute and rendering scenario that leverages contemporary APIs and hardware features. Its 96 GB of GDDR7 memory on a 512-bit bus delivers 1.79 TB/s of bandwidth, a figure that dwarfs the GTX 560 Ti’s 1,024 MB of GDDR5 on a 256-bit bus with 128.3 GB/s. For large datasets, AI inference, and high-resolution texture workloads, the RTX PRO 6000 Blackwell Max-Q is in a different class entirely. The data shows its 109.7 TFLOPS FP32 performance and 109.7 TFLOPS FP16 (1:1) capability enable compute tasks that the GTX 560 Ti’s 1,263.4 GFLOPS FP32 cannot approach.
The GTX 560 Ti wins in legacy compatibility and power efficiency relative to its era. It supports DirectX 12 (11_0) and OpenGL 4.6, but lacks Vulkan support entirely, whereas the RTX PRO 6000 Blackwell Max-Q supports DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4. The GTX 560 Ti also draws 170 W compared to the RTX PRO 6000 Blackwell Max-Q’s 300 W, and its 40 nm process node with 1,950 million transistors represents a simpler, more power-frugal design for its time. However, benchmark results indicate the RTX PRO 6000 Blackwell Max-Q’s 5 nm process and 92,200 million transistors render the GTX 560 Ti’s efficiency advantage moot in absolute performance terms.
In raw benchmark scores, the RTX PRO 6000 Blackwell Max-Q leads by 398 points (11,088 vs. 10,690), a 3.7% advantage. This margin is small, but the test conditions differ: the RTX PRO 6000 Blackwell Max-Q is measured in a modern DX12 workload while the GTX 560 Ti is measured in OpenCL, meaning the comparison is not apples-to-apples. The RTX PRO 6000 Blackwell Max-Q’s nearest rival is the NVIDIA RTX PRO 6000D Blackwell Max-Q with a 0% delta, followed by the AMD Radeon RX 550 at 0.1% ahead, indicating the RTX PRO 6000 Blackwell Max-Q sits in a tightly clustered performance band. The GTX 560 Ti’s nearest rival is the AMD Radeon RX 6600S at 0.6% ahead, with the NVIDIA Quadro K2200 trailing by 0.7%.
Architecture Differences
The architectural gulf between these two GPUs is immense. The RTX PRO 6000 Blackwell Max-Q uses the GB202 chip on a 5 nm TSMC process, packing 92,200 million transistors into a 750 mm² die with a transistor density of 122.9M per mm². The GTX 560 Ti uses the GF114 chip on a 40 nm TSMC process, with 1,950 million transistors on a 332 mm² die at a density of 5.9M per mm². This represents a 47x increase in transistor count and a 20.8x improvement in transistor density.
The RTX PRO 6000 Blackwell Max-Q features 24,064 shading units, 752 TMUs, 192 ROPs, 188 RT cores, and 752 tensor cores. The GTX 560 Ti has 384 shading units, 64 TMUs, and 32 ROPs, with no RT cores or tensor cores. The Blackwell architecture (Blackwell 2.0) includes dedicated ray tracing and tensor hardware, while the Fermi 2.0 architecture of the GTX 560 Ti predates both technologies. The RTX PRO 6000 Blackwell Max-Q’s pixel rate is 437.8 GPixel/s and texture rate is 1,714.6 GTexel/s, versus the GTX 560 Ti’s 13.17 GPixel/s and 52.67 GTexel/s.
Clock speeds differ significantly. The RTX PRO 6000 Blackwell Max-Q has a base clock of 1035 MHz and boost clock of 2280 MHz, with memory running at 1750 MHz (28 Gbps effective). The GTX 560 Ti has no base or boost clock listed, but its memory runs at 1002 MHz (4 Gbps effective). The RTX PRO 6000 Blackwell Max-Q uses PCIe 5.0 x16, while the GTX 560 Ti uses PCIe 2.0 x16. Display outputs also differ: the RTX PRO 6000 Blackwell Max-Q has 4x DisplayPort 2.1b, while the GTX 560 Ti has 2x DVI and 1x mini-HDMI 1.3a.
Head-to-Head Benchmarks
There are no direct head-to-head benchmark results in the data, so the comparison relies on each card’s individual scores and their relative standings against common rivals. The RTX PRO 6000 Blackwell Max-Q’s 3DMark Steel Nomad DX12 score of 11,088 places it 0.1% behind the AMD Radeon RX 550 (11,075) and 0.4% ahead of the NVIDIA GeForce GTX 1650 SUPER (11,047). It trails the AMD FirePro W4300 (11,225) by 1.2%. This clustering suggests the RTX PRO 6000 Blackwell Max-Q performs at a mid-range level in this particular DX12 workload, despite its professional positioning.
The GTX 560 Ti’s Geekbench OpenCL score of 10,690 puts it 0.6% behind the AMD Radeon RX 6600S (10,629) and 1% ahead of the AMD Radeon R9 M275X (10,582). It trails the NVIDIA Quadro K2200 (10,761) by 0.7% and the AMD Radeon Pro 450 (10,804) by 1.1%. The GTX 560 Ti’s performance in OpenCL is comparable to much newer mid-range and entry-level cards, which is notable given its 2011 release date.
The largest quantitative gap between the two cards is in memory bandwidth: 1.79 TB/s versus 128.3 GB/s, a 13.9x difference. FP32 compute shows a 86.8x difference (109.7 TFLOPS vs. 1,263.4 GFLOPS). Pixel rate differs by 33.2x (437.8 vs. 13.17 GPixel/s), and texture rate by 32.6x (1,714.6 vs. 52.67 GTexel/s). These figures underscore that the RTX PRO 6000 Blackwell Max-Q is not merely a faster GTX 560 Ti; it is a fundamentally different class of hardware.
FAQ
Q: Which GPU has more memory bandwidth?
A: The RTX PRO 6000 Blackwell Max-Q has 1.79 TB/s of bandwidth, compared to the GTX 560 Ti’s 128.3 GB/s.
Q: Does the GTX 560 Ti support ray tracing?
A: No. The GTX 560 Ti has no RT cores, while the RTX PRO 6000 Blackwell Max-Q includes 188 RT cores.
Q: What is the process node difference?
A: The RTX PRO 6000 Blackwell Max-Q uses a 5 nm TSMC process, while the GTX 560 Ti uses a 40 nm TSMC process.
Q: Which GPU has a higher transistor count?
A: The RTX PRO 6000 Blackwell Max-Q has 92,200 million transistors, versus 1,950 million for the GTX 560 Ti.
Q: Are their benchmark percentiles similar?
A: Yes. The RTX PRO 6000 Blackwell Max-Q sits in the 50th percentile of all GPUs, while the GTX 560 Ti sits in the 49th percentile.
Q: What is the memory type on each card?
A: The RTX PRO 6000 Blackwell Max-Q uses GDDR7, while the GTX 560 Ti uses GDDR5.
The Verdict
The data supports a clear split: the RTX PRO 6000 Blackwell Max-Q is the pick for any workload involving modern APIs, ray tracing, tensor operations, or massive memory pools. Its 96 GB GDDR7 frame buffer, 188 RT cores, and 752 tensor cores make it the only viable option for contemporary professional applications. The GTX 560 Ti’s lack of Vulkan support, no RT or tensor cores, and 1 GB memory cap its utility to legacy DirectX 11 workloads and basic OpenCL compute.
The GTX 560 Ti is the pick for users constrained by power and thermals in a legacy system, given its 170 W TDP versus 300 W, and its 2x 6-pin power connectors versus the RTX PRO 6000 Blackwell Max-Q’s 1x 16-pin. The GTX 560 Ti’s 450 W suggested PSU also contrasts with the RTX PRO 6000 Blackwell Max-Q’s 700 W requirement. However, the RTX PRO 6000 Blackwell Max-Q’s performance in FP32 (109.7 TFLOPS vs. 1,263.4 GFLOPS) and memory bandwidth (1.79 TB/s vs. 128.3 GB/s) is so dominant that no legacy advantage can offset it.
Benchmark scores show both GPUs in the same percentile band, but this is misleading. The RTX PRO 6000 Blackwell Max-Q’s 11,088 in 3DMark Steel Nomad DX12 reflects a modern DirectX 12 Ultimate workload, while the GTX 560 Ti’s 10,690 in Geekbench OpenCL reflects a compute-oriented test. In any shared workload that exercises current features, the RTX PRO 6000 Blackwell Max-Q would outperform the GTX 560 Ti by an order of magnitude, as evidenced by the 86.8x FP32 compute difference. The RTX PRO 6000 Blackwell Max-Q is the definitive choice for future-proof professional use; the GTX 560 Ti remains a historical artifact with no place in modern computing.
Specification Differences
| Specification | RTX PRO 6000 Blackwell Max-Q | GTX 560 Ti |
|----------------|-------------------------------|-------------|
| Chip | GB202 | GF114 |
| Architecture | Blackwell 2.0 | Fermi 2.0 |
| Process Node | 5 nm | 40 nm |
| Transistors | 92,200 million | 1,950 million |
| Die Size | 750 mm² | 332 mm² |
| Transistor Density | 122.9M / mm² | 5.9M / mm² |
| Base Clock | 1035 MHz | None |
| Boost Clock | 2280 MHz | None |
| Memory Clock | 1750 MHz (28 Gbps effective) | 1002 MHz (4 Gbps effective) |
| Memory Size | 96 GB | 1024 MB |
| Memory Type | GDDR7 | GDDR5 |
| Memory Bus Width | 512 bit | 256 bit |
| Memory Bandwidth | 1.79 TB/s | 128.3 GB/s |
| Shading Units | 24064 | 384 |
| TMUs | 752 | 64 |
| ROPs | 192 | 32 |
| RT Cores | 188 | None |
| Tensor Cores | 752 | None |
| Pixel Rate | 437.8 GPixel/s | 13.17 GPixel/s |
| Texture Rate | 1,714.6 GTexel/s | 52.67 GTexel/s |
| FP32 | 109.7 TFLOPS | 1,263.4 GFLOPS |
| FP16 | 109.7 TFLOPS (1:1) | None |
| TDP | 300 W | 170 W |
| Power Connectors | 1x 16-pin | 2x 6-pin |
| Suggested PSU | 700 W | 450 W |
| Bus Interface | PCIe 5.0 x16 | PCIe 2.0 x16 |
| Display Outputs | 4x DisplayPort 2.1b | 2x DVI, 1x mini-HDMI 1.3a |
| DirectX | 12 Ultimate (12_2) | 12 (11_0) |
| Vulkan | 1.4 | None |
| Release Date | 2025-03-17 | 2011-01-24 |
| Production Status | Active | End-of-life |
| Launch MSRP | 8,565 USD | 249 USD |