NVIDIA GeForce GTX 1080 Ti vs NVIDIA T400 4 GB Comparison

NVIDIA
GEFORCE

NVIDIA GeForce GTX 1080 Ti

CORE STATE GP102
VRAM 11 GB
CLOCK SPEED 1582 MHz
TDP 250 W
BUS WIDTH 352 bit
ARCHITECTURE Pascal
nm
PROCESS 16 nm
LAUNCH DATE 2017
VS
NVIDIA
GEFORCE

T400 4 GB

CORE STATE TU117
VRAM 4 GB
CLOCK SPEED 1425 MHz
TDP 30 W
BUS WIDTH 64 bit
ARCHITECTURE Turing
nm
PROCESS 12 nm
LAUNCH DATE 2021

PERFORMANCE BENCHMARKS

3dmark_3dmark_steel_nomad_dx12
2,231
N/A
geekbench_metal
30,624
N/A
geekbench_opencl
67,929
17,320
geekbench_vulkan
40,511
16,263
passmark_directx_10
118
N/A
passmark_directx_11
151
N/A
passmark_directx_12
66
N/A
passmark_directx_9
231
N/A
passmark_g2d
939
N/A
passmark_g3d
18,600
N/A
passmark_gpu_compute
9,632
N/A

Analysis: NVIDIA GeForce GTX 1080 Ti vs NVIDIA T400 4 GB

The NVIDIA T400 4 GB and the NVIDIA GeForce GTX 1080 Ti represent two vastly different design philosophies from the same manufacturer. The T400 is a low-power, entry-level workstation card built on the modern Turing architecture, while the GTX 1080 Ti is a high-performance consumer flagship from the older Pascal generation. Benchmark data reveals a decisive performance gap, but the comparison is not without nuance, as architectural differences and intended use cases paint a fuller picture.

Head-to-Head Benchmarks

The head-to-head benchmark results are unambiguous in their outcome. The GTX 1080 Ti wins both available tests, securing a 2-0 victory in the direct comparison. The most significant disparity appears in the Geekbench OpenCL test, where the GTX 1080 Ti scores 67,929 points against the T400’s 17,320 points. This translates to a delta of -74.5% for the T400, meaning the GTX 1080 Ti delivers nearly four times the raw compute performance in this workload. The magnitude of this difference highlights the fundamental gap in processing capability between a 30 W low-profile card and a 250 W dual-slot behemoth.

The Geekbench Vulkan test shows a similar, though slightly less extreme, pattern. Here, the GTX 1080 Ti scores 40,511 points, while the T400 manages 16,263 points. The delta is -59.9%, indicating the GTX 1080 Ti is roughly 2.5 times faster in this graphics API workload. While this is a smaller relative gap than in OpenCL, it still represents a massive performance advantage for the older, larger card. The T400’s Vulkan score of 16,263 is respectable for its class, but it simply cannot compete with the sheer throughput of the GP102 chip.

Looking at the broader benchmark landscape, the T400’s average benchmark score of 16,792 places it in the 60th percentile of all GPUs. Its nearest rivals include the AMD Radeon RX 7600S (16,696, +0.6%), the NVIDIA Tesla M4 (16,932, -0.8%), and the AMD Radeon HD 7970M (17,019, -1.3%). This clustering shows the T400 is competitive within its power and form-factor class, trading blows with mobile and older workstation parts. In contrast, the GTX 1080 Ti’s average score of 15,548 puts it in the 58th percentile, which is surprisingly lower than the T400’s percentile ranking. Its nearest rivals include the AMD Radeon R9 M380 (15,521, +0.2%), the AMD Radeon Pro W5500 (15,679, -0.8%), and the NVIDIA GeForce RTX 2060 (15,290, +1.7%). The percentile discrepancy is a quirk of the averaging methodology, as the GTX 1080 Ti’s single OpenCL score of 67,929 dwarfs the T400’s results, but the GTX 1080 Ti also has several lower DirectX and Passmark scores that drag its average down.

The data shows a clear pattern: in synthetic compute and graphics tests, the GTX 1080 Ti is in a different league. The T400’s 1,094.4 GFLOPS of FP32 performance is a fraction of the GTX 1080 Ti’s 11.34 TFLOPS. Similarly, memory bandwidth tells the story, with the GTX 1080 Ti’s 484.4 GB/s dwarfing the T400’s 80.00 GB/s. The GTX 1080 Ti also holds decisive advantages in pixel rate (139.2 GPixel/s vs 22.80 GPixel/s) and texture rate (354.4 GTexel/s vs 34.20 GTexel/s). These are not incremental differences; they represent orders of magnitude in throughput capability.

FAQ

Q: Which card has the higher average benchmark score?

A: The NVIDIA T400 4 GB has a higher average benchmark score of 16,792 compared to the GTX 1080 Ti’s 15,548. This is despite the GTX 1080 Ti winning both head-to-head tests, illustrating how different benchmark mixes can affect aggregate scores.

Q: How large is the performance gap in the Geekbench OpenCL test?

A: The GTX 1080 Ti scores 67,929 points, which is 74.5% higher than the T400’s score of 17,320. This represents a nearly four-fold advantage for the GTX 1080 Ti in this compute-oriented workload.

Q: What is the T400’s closest rival by average score?

A: The T400’s closest rival is the NVIDIA Tesla M4, which has an average score of 16,932, representing a -0.8% delta. The AMD Radeon RX 7600S is also very close at 16,696, just 0.6% behind the T400.

Q: Does the GTX 1080 Ti support modern graphics APIs?

A: Yes, the GTX 1080 Ti supports DirectX 12 (12_1), OpenGL 4.6, and Vulkan 1.4, matching the API support of the T400. Both cards are equally current in terms of API compatibility.

Q: What is the memory configuration difference between the two cards?

A: The T400 has 4 GB of GDDR6 memory on a 64-bit bus, while the GTX 1080 Ti has 11 GB of GDDR5X memory on a 352-bit bus. The GTX 1080 Ti’s memory bandwidth is 484.4 GB/s, over six times higher than the T400’s 80.00 GB/s.

Q: Which card has a higher transistor density?

A: The GTX 1080 Ti has a higher transistor density at 25.1M transistors per mm², compared to the T400’s 23.5M per mm². This is notable because the GTX 1080 Ti uses the older 16 nm process, while the T400 uses the newer 12 nm node.

The Verdict

The benchmark data makes the choice clear for users prioritizing raw performance: the NVIDIA GeForce GTX 1080 Ti is the superior card by a wide margin. Its 74.5% lead in OpenCL and 59.9% lead in Vulkan are decisive. For any workload demanding high compute throughput, large frame buffers, or high memory bandwidth, the GTX 1080 Ti is the only rational option. The 11 GB memory capacity and 484.4 GB/s bandwidth make it suitable for large datasets and high-resolution textures, while the T400’s 4 GB and 80.00 GB/s are limiting factors.

However, the T400 4 GB has its own merits that the data supports. Its 30 W TDP and single-slot design with no power connectors make it suitable for systems where space and power are constrained. The suggested PSU of 200 W versus the GTX 1080 Ti’s 600 W highlights the operational differences. The T400 also holds a higher percentile ranking (60th vs 58th) and a higher average benchmark score, suggesting it performs well relative to its peers in its class. For a workstation needing basic display output, multi-monitor support via three mini-DisplayPort 1.4a outputs, and low power consumption, the T400 is a sensible choice.

The data suggests that the GTX 1080 Ti is for users who need maximum performance and have the power budget and physical space to accommodate a dual-slot, 250 W card. The T400 is for users who prioritize efficiency, compactness, and basic workstation capabilities over raw speed. There is no overlap in their intended use cases.

Specification Differences

The two cards differ in nearly every measurable specification. The GPU chips are distinct: the T400 uses the TU117 chip, while the GTX 1080 Ti uses the GP102. The manufacturing processes differ, with the T400 built on a 12 nm node and the GTX 1080 Ti on a 16 nm node. The T400 has 4,700 million transistors on a 200 mm² die, while the GTX 1080 Ti has 11,800 million transistors on a 471 mm² die.

Clock speeds show the GTX 1080 Ti running much faster, with a base clock of 1481 MHz and boost of 1582 MHz, compared to the T400’s 420 MHz base and 1425 MHz boost. Memory configurations are vastly different: the T400 has 4 GB GDDR6 on a 64-bit bus, while the GTX 1080 Ti has 11 GB GDDR5X on a 352-bit bus. The T400’s memory runs at 10 Gbps effective, while the GTX 1080 Ti’s runs at 11 Gbps effective.

Compute unit counts heavily favor the GTX 1080 Ti, with 3584 shading units, 224 TMUs, and 88 ROPs, versus the T400’s 384 shading units, 24 TMUs, and 16 ROPs. The power requirements are starkly different: the T400 has a 30 W TDP with no power connectors, while the GTX 1080 Ti has a 250 W TDP requiring one 6-pin and one 8-pin connector. The GTX 1080 Ti is also physically larger at 267 mm in length and dual-slot width, while the T400 is single-slot.

Architecture Differences

The architectural divide between these two cards is significant, reflecting NVIDIA’s design evolution. The T400 is based on the Turing architecture, which is a newer generation than the Pascal architecture of the GTX 1080 Ti. This is evident in the T400’s support for FP16 at a 2:1 ratio, delivering 2.189 TFLOPS, whereas the GTX 1080 Ti’s FP16 performance is a paltry 177.2 GFLOPS at a 1:64 ratio. The Turing architecture in the T400 is designed for modern workstation tasks, while Pascal prioritized raw FP32 throughput.

The transistor density figures reveal an interesting nuance. Despite using the older 16 nm process, the GTX 1080 Ti achieves a higher density of 25.1M transistors per mm², compared to the T400’s 23.5M on 12 nm. This is likely due to the GP102’s larger, more complex design. Neither card features dedicated ray tracing or tensor cores, as both lack these units in their specifications.

The T400 belongs to the Quadro Turing (Tx000) generation and is positioned as a successor to Quadro Volta, with Workstation Ampere as its successor. The GTX 1080 Ti belongs to the GeForce 10-series, succeeding the GeForce 900 series and preceding the GeForce 20 series. The T400’s display outputs are exclusively mini-DisplayPort 1.4a (three of them), while the GTX 1080 Ti offers one HDMI 2.0 port and three DisplayPort 1.4a outputs. Both are end-of-life products, but the T400 was released later, in 2021, versus the GTX 1080 Ti’s 2017 release. The GTX 1080 Ti had a launch MSRP of 699 USD.

DETAILED SPECIFICATIONS

SPECIFICATION
GTX 1080 Ti
T400 4 GB
Core Specs
Shading Units
3,584
384 -89.3%
Shaders
3,584
384 -89.3%
TMUs
224
24 -89.3%
ROPs
88
16 -81.8%
SM Count
28
6 -78.6%
Clocks
Base Clock
1481 MHz
420 MHz
Boost Clock
1582 MHz
1425 MHz
Memory Clock
1376 MHz 11 Gbps effective
1250 MHz 10 Gbps effective
Memory
Memory Size
11 GB
4 GB
VRAM (MB)
11,264
4,096 -63.6%
Memory Type
GDDR5X
GDDR6
Memory Bus
352 bit
64 bit
Bandwidth
484.4 GB/s
80.00 GB/s
Cache
L1 Cache
48 KB (per SM)
64 KB (per SM)
L2 Cache
2.75 MB
1024 KB
Performance
Pixel Rate
139.2 GPixel/s
22.80 GPixel/s
Texture Rate
354.4 GTexel/s
34.20 GTexel/s
FP32 (TFLOPS)
11.34 TFLOPS
1,094.4 GFLOPS
FP64 (TFLOPS)
354.4 GFLOPS (1:32)
34.20 GFLOPS (1:32)
FP16 (TFLOPS)
177.2 GFLOPS (1:64)
2.189 TFLOPS (2:1)
Power
TDP
250 W
30 W
TDP (W)
250
30 -88.0%
Suggested PSU
600 W
200 W
Power Connectors
1x 6-pin + 1x 8-pin
None
Architecture
Architecture
Pascal
Turing
GPU Name
GP102
TU117
Generation
GeForce 10
Quadro Turing (Tx000)
Process Size
16 nm
12 nm
Transistors
11,800 million
4,700 million
Die Size
471 mm²
200 mm²
Foundry
TSMC
TSMC
Density
25.1M / mm²
23.5M / mm²
API Support
DirectX
12 (12_1)
12 (12_1)
OpenGL
4.6
4.6
Vulkan
1.4
1.4
OpenCL
3.0
3.0
CUDA
6.1
7.5
Shader Model
6.8
6.8
Physical
Slot Width
Dual-slot
Single-slot
Length
267 mm 10.5 inches
—
Height
112 mm 4.4 inches
—
Outputs
1x HDMI 2.03x DisplayPort 1.4a
3x mini-DisplayPort 1.4a
Bus Interface
PCIe 3.0 x16
PCIe 3.0 x16
Other
Launch Price
699 USD
—
Production
End-of-life
End-of-life
Predecessor
GeForce 900
Quadro Volta
Successor
GeForce 20
Workstation Ampere
View GeForce GTX 1080 Ti Details View T400 4 GB Details