NVIDIA GeForce GTX 1070 vs NVIDIA RTX PRO 6000 Blackwell Max-Q Comparison
NVIDIA GeForce GTX 1070
RTX PRO 6000 Blackwell Max-Q
PERFORMANCE BENCHMARKS
Analysis: NVIDIA GeForce GTX 1070 vs NVIDIA RTX PRO 6000 Blackwell Max-Q
The NVIDIA RTX PRO 6000 Blackwell Max-Q and the NVIDIA GeForce GTX 1070 represent two distinct eras of GPU design, separated by nearly a decade of architectural evolution. The data shows a stark contrast in raw performance, with the professional Blackwell part delivering a 924.8% higher score in the single shared benchmark compared to the consumer Pascal card. This analysis breaks down the specifications, benchmark results, and architectural differences to determine where each card stands.
FAQ
Q: How much faster is the RTX PRO 6000 Blackwell Max-Q than the GTX 1070 in the shared 3DMark Steel Nomad DX12 test?
A: The RTX PRO 6000 Blackwell Max-Q scores 11088, while the GTX 1070 scores 1082. This results in a delta of 924.8%, making the Blackwell card the decisive winner in this benchmark.
Q: What is the memory configuration difference between the two cards?
A: The RTX PRO 6000 Blackwell Max-Q features 96 GB of GDDR7 memory on a 512-bit bus, delivering 1.79 TB/s of bandwidth. The GTX 1070 has 8 GB of GDDR5 memory on a 256-bit bus, with a bandwidth of 256.3 GB/s.
Q: Which card has a higher transistor density?
A: The RTX PRO 6000 Blackwell Max-Q, built on a 5 nm process, has a transistor density of 122.9M / mm². The GTX 1070, on a 16 nm process, has a density of 22.9M / mm².
Q: Does the GTX 1070 support hardware ray tracing or tensor cores?
A: No. The GTX 1070 lists no RT cores and no tensor cores. The RTX PRO 6000 Blackwell Max-Q includes 188 RT cores and 752 tensor cores.
Q: What are the FP32 compute capabilities of each card?
A: The RTX PRO 6000 Blackwell Max-Q delivers 109.7 TFLOPS of FP32 performance. The GTX 1070 offers 6.463 TFLOPS of FP32 performance.
Q: What is the production status of each card?
A: The RTX PRO 6000 Blackwell Max-Q is listed as "Active" in production, while the GTX 1070 is marked as "End-of-life."
Architecture Differences
The architectural gap between these two GPUs is immense. The RTX PRO 6000 Blackwell Max-Q is built on the GB202 chip using the Blackwell 2.0 architecture, fabricated on a 5 nm process at TSMC. In contrast, the GTX 1070 uses the GP104 chip with the Pascal architecture, fabricated on a 16 nm process. This process difference is reflected in the transistor counts: the Blackwell chip packs 92,200 million transistors on a 750 mm² die, while the Pascal chip has 7,200 million transistors on a 314 mm² die. The resulting transistor density is 122.9M / mm² for the newer card versus 22.9M / mm² for the older one.
The Blackwell architecture introduces dedicated hardware that the Pascal card completely lacks. The RTX PRO 6000 has 188 RT cores and 752 tensor cores, enabling hardware-accelerated ray tracing and AI workloads. The GTX 1070 has no such units, relying purely on its 1920 shading units. The shading unit count also differs drastically, with the Blackwell part featuring 24064 shading units, 752 TMUs, and 192 ROPs, compared to the GTX 1070's 1920 shading units, 120 TMUs, and 64 ROPs.
The memory subsystem is another major divergence. The Blackwell card uses GDDR7 memory, a modern standard, while the GTX 1070 uses GDDR5. The RTX PRO 6000 supports a 512-bit memory bus, double the 256-bit bus of the GTX 1070. The API support also differs, with the Blackwell card supporting DirectX 12 Ultimate (12_2) and the GTX 1070 only supporting DirectX 12 (12_1). Both cards support OpenGL 4.6 and Vulkan 1.4.
Head-to-Head Benchmarks
The only direct benchmark comparison available is the 3DMark Steel Nomad DX12 test. In this test, the RTX PRO 6000 Blackwell Max-Q scores 11088, while the GTX 1070 scores 1082. The delta is a massive 924.8% in favor of the Blackwell card. This single result illustrates the generational leap in performance, but the GTX 1070 has a broader set of benchmark data across multiple test suites.
The GTX 1070's performance profile shows its strengths in legacy and compute-oriented tests. It scores 13498 in Passmark G3D, 44700 in Geekbench OpenCL, and 22121 in Geekbench Vulkan. Its Geekbench Metal score is 18801. These results show a capable card for its era, but they are dwarfed by the sheer compute throughput of the Blackwell architecture. The RTX PRO 6000's FP32 performance of 109.7 TFLOPS is approximately 17 times higher than the GTX 1070's 6.463 TFLOPS, even before considering the tensor and RT core advantages.
The data shows the RTX PRO 6000 wins the only head-to-head comparison, but the GTX 1070's multiple benchmark scores provide context for its historical performance. The Passmark DirectX 11 score of 100 and DirectX 9 score of 197 indicate its strength in older APIs, while its DirectX 12 score of 48 is notably lower. The Blackwell card's single benchmark result of 11088 places it in the 50th percentile of all GPUs, while the GTX 1070's average benchmark score of 9780 places it in the 47th percentile.
Specification Differences
The specifications differ on nearly every measurable field. The RTX PRO 6000 Blackwell Max-Q has a base clock of 1035 MHz and a boost clock of 2280 MHz, while the GTX 1070 has a higher base clock of 1506 MHz but a lower boost clock of 1683 MHz. Memory speed also differs: the Blackwell card runs at 1750 MHz (28 Gbps effective), while the GTX 1070 runs at 2002 MHz (8 Gbps effective).
The TDP is 300 W for the RTX PRO 6000, compared to 150 W for the GTX 1070. The power connector is a single 16-pin for the Blackwell card and a single 8-pin for the Pascal card. The suggested PSU is 700 W for the newer card and 450 W for the older one. The bus interface is PCIe 5.0 x16 for the RTX PRO 6000, while the GTX 1070 uses PCIe 3.0 x16.
Display outputs differ significantly. The RTX PRO 6000 has 4x DisplayPort 2.1b outputs. The GTX 1070 has 1x DVI, 1x HDMI 2.0, and 3x DisplayPort 1.4a outputs. Physical dimensions are nearly identical: both are 267 mm long and 40 mm wide, with a height difference of 1 mm (111 mm for the Blackwell card, 112 mm for the Pascal card). Both are dual-slot cards.
The release dates are far apart, with the GTX 1070 launching on 2016-06-09 and the RTX PRO 6000 launching on 2025-03-17. The GTX 1070 has a launch MSRP of 379 USD, while the RTX PRO 6000 has a launch MSRP of 8,565 USD.
Where Each One Wins
The RTX PRO 6000 Blackwell Max-Q wins in every modern workload category. Its 109.7 TFLOPS FP32 performance makes it suitable for compute-heavy tasks like scientific simulation and deep learning training. The 752 tensor cores accelerate AI inference, and the 188 RT cores enable real-time ray tracing. The 96 GB of GDDR7 memory with 1.79 TB/s bandwidth supports massive datasets and high-resolution textures that would be impossible on the GTX 1070. Its 4x DisplayPort 2.1b outputs support high refresh rates and high-resolution displays.
The GTX 1070 wins in legacy scenarios. Its higher base clock of 1506 MHz might give it an edge in single-threaded older applications that do not scale across many cores. Its 150 W TDP means it draws less power, potentially making it easier to integrate into older systems with smaller power supplies. Its support for DVI and HDMI 2.0 outputs could be beneficial for connecting to older monitors. The Pascal architecture has no ray tracing or tensor core overhead, which means all its shading units are dedicated to traditional rasterization tasks.
The GTX 1070's Passmark DirectX 9 score of 197 and DirectX 11 score of 100 suggest it retains strong performance in older DirectX titles. The RTX PRO 6000 has no data for these older API tests, so its legacy performance is unknown. The GTX 1070 also has a broader range of benchmark data points (11 tests) compared to the RTX PRO 6000 (1 test), giving a more complete picture of its capabilities across different workloads.
The Verdict
The data clearly indicates that the RTX PRO 6000 Blackwell Max-Q is the superior GPU in raw performance. The 924.8% delta in the 3DMark Steel Nomad DX12 test is not a marginal improvement; it represents a complete generational overhaul in compute capability. The Blackwell card offers 96 GB of memory versus 8 GB, 24064 shading units versus 1920, and dedicated RT and tensor cores that the Pascal card lacks entirely.
The GTX 1070, however, serves a different purpose. Its 150 W TDP and lower power requirements make it a viable option for systems with limited power delivery. Its compatibility with older display outputs like DVI and HDMI 2.0, combined with its strong Passmark DirectX 9 and DirectX 11 scores, suggest it remains functional for legacy applications and older games. The GTX 1070 is end-of-life, while the RTX PRO 6000 is active in production.
For a user focused on modern, compute-intensive workloads, the RTX PRO 6000 Blackwell Max-Q is the only reasonable choice. The data shows it is overwhelmingly faster in the one benchmark they share, and its architectural features—ray tracing, tensor cores, massive memory bandwidth—are essential for current software. For a user with legacy software requirements or power constraints, the GTX 1070 offers a lower-power alternative, but it cannot match the Blackwell card's performance or feature set. The benchmark results and specification differences leave no ambiguity: the RTX PRO 6000 is the dominant performer, while the GTX 1070 is a historical artifact with limited modern applicability.