NVIDIA GeForce GT 555M vs NVIDIA RTX PRO 5000 72 GB Blackwell Comparison
NVIDIA GeForce GT 555M
RTX PRO 5000 72 GB Blackwell
PERFORMANCE BENCHMARKS
Analysis: NVIDIA GeForce GT 555M vs NVIDIA RTX PRO 5000 72 GB Blackwell
The NVIDIA GeForce GT 555M and the NVIDIA RTX PRO 5000 72 GB Blackwell represent two extremes of the GPU spectrum, separated by over a decade of architectural evolution. The GT 555M is a legacy mobile part from the Fermi era, while the RTX PRO 5000 is a current, active workstation monster built on Blackwell. Benchmark data shows a complex picture: the RTX PRO 5000 achieves staggering performance in modern workloads, yet its aggregate score is dragged down by legacy tests, placing both cards at the same 37th percentile overall. This analysis breaks down the raw numbers, architectural chasms, and specific use cases where each card dominates.
Head-to-Head Benchmarks
The benchmark data reveals a stark dichotomy. The RTX PRO 5000 delivers a massive 3DMark Steel Nomad DX12 score of 9579.5, a modern test that stresses ray tracing and DirectX 12 Ultimate features. This is a score that the GT 555M, with its DirectX 12 (11_0) support, cannot even attempt, as it lacks the hardware for such workloads. In contrast, the GT 555M’s only benchmark is a Geekbench OpenCL score of 6493, which places it 0.2% ahead of the NVIDIA Quadro M5000M (6481) and 0.3% ahead of the AMD Radeon Vega 10 Mobile (6476). This shows the GT 555M is competitive with mid-range mobile GPUs from a later generation in compute tasks, but it is fundamentally a product of its time.
The RTX PRO 5000’s Passmark suite shows where its power lies and where it struggles. Its Passmark G3D score is 24310, a colossal figure that dwarfs any legacy part. Its GPU Compute score of 15667 further reinforces its compute dominance. However, the legacy DirectX tests tell a different story. The Passmark DirectX 9 score is 311, the DirectX 10 score is 175, and the DirectX 11 score is 219. The DirectX 12 score is a paltry 78. These low scores are likely due to driver overhead or architectural focus on newer APIs, but they drastically reduce the card's average score. The RTX PRO 5000’s average benchmark score is only 6407, which is actually 1.1% slower than the AMD Radeon Vega 10 Mobile (6476) and the NVIDIA Quadro M5000M (6481) in this aggregate metric. This is a critical point: while the RTX PRO 5000 is a generation ahead in modern workloads, its legacy performance is so poor that it falls behind older, mid-range cards on average.
This creates a paradoxical situation where the newest card has a lower average score than the older one. The GT 555M’s single score of 6493 is actually higher than the RTX PRO 5000’s average of 6407. The data shows that the GT 555M is 0.3% faster than the RTX PRO 5000 in this aggregate comparison, with the RTX PRO 5000 being 0.9% slower than the Intel UHD Graphics P750 (6554) in the same metric. This does not mean the GT 555M is a better GPU; it means the RTX PRO 5000’s legacy test results are so anomalous that they skew its aggregate score. The head-to-head wins are clear: the RTX PRO 5000 wins decisively in any modern, high-fidelity workload, while the GT 555M has a single, narrow lead in the aggregate average due to the RTX PRO 5000’s legacy test failures.
FAQ
Q: Which GPU has a higher average benchmark score?
A: The NVIDIA GeForce GT 555M has a higher average benchmark score of 6493, compared to the NVIDIA RTX PRO 5000 72 GB Blackwell’s average of 6407. This is because the RTX PRO 5000’s legacy Passmark DirectX scores are exceptionally low, pulling its average down.
Q: How does the GT 555M compare to its nearest rivals?
A: The GT 555M’s score of 6493 puts it 0.2% ahead of the NVIDIA Quadro M5000M (6481) and 0.3% ahead of the AMD Radeon Vega 10 Mobile (6476). It is 0.3% behind the NVIDIA GeForce GTX 670M (6513) and 0.9% behind the Intel UHD Graphics P750 (6554).
Q: What is the RTX PRO 5000’s best benchmark result?
A: The RTX PRO 5000’s best result is its 3DMark Steel Nomad DX12 score of 9579.5, which is a modern test. Its highest Passmark score is the G3D test at 24310, followed by the GPU Compute test at 15667.
Q: Why is the RTX PRO 5000’s average score so low despite its high-end specs?
A: The data shows the RTX PRO 5000 scores very low on legacy DirectX tests, with a Passmark DirectX 12 score of 78, DirectX 10 score of 175, and DirectX 11 score of 219. These scores contrast sharply with its modern 3DMark result and drag down its aggregate average.
Q: What is the transistor density difference between the two chips?
A: The RTX PRO 5000’s GB202 chip has a transistor density of 122.9M / mm², while the GT 555M’s GF106 chip has a density of 4.9M / mm². This represents a massive increase in manufacturing sophistication.
Q: Does the GT 555M support modern APIs like Vulkan?
A: No. The GT 555M’s API support is listed as DirectX 12 (11_0) and OpenGL 4.6, with no Vulkan support listed. The RTX PRO 5000 supports DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4.
The Verdict
The data makes a definitive case: the NVIDIA RTX PRO 5000 72 GB Blackwell is the superior hardware for any modern or future-facing workload. Its 3DMark Steel Nomad score of 9579.5 and Passmark G3D score of 24310 are in a different stratosphere than anything the GT 555M can produce. The GT 555M’s only victory is in the aggregate average score, a statistical artifact of the RTX PRO 5000’s poor legacy DirectX performance. For a user running contemporary applications, the RTX PRO 5000 is the only choice.
The GT 555M should be selected only by someone constrained to a legacy environment where its specific compute capabilities are still relevant. Its Geekbench OpenCL score of 6493 makes it competitive with the NVIDIA Quadro M5000M and AMD Radeon Vega 10 Mobile, but this is a narrow use case. The RTX PRO 5000 is the clear winner for professional 3D rendering, AI acceleration, and high-end gaming. The GT 555M is an end-of-life product from 2011, while the RTX PRO 5000 is an active product from 2025. The verdict is not close: the RTX PRO 5000 is the definitive choice for anyone who needs performance, and the GT 555M is a relic for legacy systems.
Specification Differences
The specification gap between the two cards is immense. The GT 555M features 144 shading units, 24 TMUs, and 16 ROPs, while the RTX PRO 5000 features 14,080 shading units, 440 TMUs, and 160 ROPs. The memory configurations are equally divergent: the GT 555M has 1024 MB of DDR3 on a 128-bit bus with 28.80 GB/s bandwidth, whereas the RTX PRO 5000 has 72 GB of GDDR7 on a 384-bit bus with 1.34 TB/s bandwidth. The clock speeds differ, with the GT 555M’s memory running at 900 MHz (1800 Mbps effective) and the RTX PRO 5000’s memory at 1750 MHz (28 Gbps effective). The RTX PRO 5000 has explicit base and boost clocks of 1740 MHz and 2377 MHz, respectively, while the GT 555M has no listed base or boost clock. The RTX PRO 5000 also has 110 RT cores and 440 tensor cores, features completely absent from the GT 555M.
The bus interface also differs, with the GT 555M using PCIe 2.0 x16 and the RTX PRO 5000 using PCIe 5.0 x16. The RTX PRO 5000 has 4x DisplayPort 2.1b outputs, while the GT 555M’s display outputs are listed as "Portable Device Dependent". The TDP shows a massive difference: the GT 555M is a 35 W part, while the RTX PRO 5000 is a 300 W card requiring a 700 W suggested PSU and a dual-slot cooler with a 16-pin power connector. The RTX PRO 5000 has physical dimensions of 267 mm in length, 111 mm in height, and 40 mm in width, while the GT 555M has no listed dimensions. Finally, the GT 555M supports DirectX 12 (11_0) and OpenGL 4.6, while the RTX PRO 5000 supports DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4.
Architecture Differences
The architectural divide is even more fundamental than the spec sheet. The GT 555M is built on the Fermi architecture using a 40 nm process at TSMC, with 1,170 million transistors on a 238 mm² die. The RTX PRO 5000 is built on the Blackwell 2.0 architecture using a 5 nm process at TSMC, with a staggering 92,200 million transistors on a 750 mm² die. The transistor density shows the manufacturing leap: the GT 555M has 4.9M transistors per mm², while the RTX PRO 5000 has 122.9M per mm². This is a 25x improvement in density, enabling the RTX PRO 5000 to pack 64 times more transistors into a die that is only 3.15x larger.
The GT 555M’s Fermi architecture lacks any dedicated ray tracing or tensor cores. The RTX PRO 5000’s Blackwell 2.0 architecture includes 110 RT cores for ray tracing and 440 tensor cores for AI acceleration. The FP32 compute performance illustrates the scale: the GT 555M delivers 339.8 GFLOPS, while the RTX PRO 5000 delivers 66.94 TFLOPS. The RTX PRO 5000 also offers FP16 performance at a 1:1 ratio with FP32 (66.94 TFLOPS), while the GT 555M has no listed FP16 capability. The pixel rate and texture rate also show a generational gulf: the GT 555M has a pixel rate of 3.540 GPixel/s and texture rate of 14.16 GTexel/s, while the RTX PRO 5000 has a pixel rate of 380.3 GPixel/s and texture rate of 1,045.9 GTexel/s. The GT 555M is a product of the GeForce 500M generation, with a predecessor in GeForce 400M and successor in GeForce 600M. The RTX PRO 5000 is from the Blackwell PRO W generation, succeeding the Workstation Ada series.
Where Each One Wins
The RTX PRO 5000 wins in every scenario that requires modern graphics processing. Its 3DMark Steel Nomad DX12 score of 9579.5 demonstrates dominance in DirectX 12 Ultimate titles with ray tracing. Its Passmark G3D score of 24310 makes it ideal for high-resolution 3D rendering and simulation. The GPU Compute score of 15667 indicates strong performance in scientific computing, AI inference, and video encoding tasks. The 72 GB of GDDR7 memory with 1.34 TB/s bandwidth is suited for massive datasets, large language models, and 8K video editing. The RTX PRO 5000 is the clear choice for a professional workstation, a high-end gaming rig, or any AI development environment.
The GT 555M wins only in the narrow context of legacy compute compatibility. Its Geekbench OpenCL score of 6493 is competitive with the NVIDIA Quadro M5000M and AMD Radeon Vega 10 Mobile, making it a viable option for older OpenCL-based applications that do not require modern features. Its low 35 W TDP makes it suitable for legacy mobile platforms where power consumption is critical. However, this is a niche use case. The GT 555M cannot handle modern game engines, lacks ray tracing support, and has no tensor cores for AI workloads. Its 28.80 GB/s memory bandwidth is a bottleneck for any modern application. The data suggests that while the GT 555M has a single aggregate score advantage, the RTX PRO 5000 wins decisively in every meaningful performance category, making it the only rational choice for anyone building a system for current or future software.