NVIDIA GeForce GT 555M vs NVIDIA GeForce GTX 560 SE Comparison

NVIDIA
GEFORCE

NVIDIA GeForce GT 555M

CORE STATE GF106
VRAM 1024 MB
CLOCK SPEED —
TDP 35 W
BUS WIDTH 128 bit
ARCHITECTURE Fermi
nm
PROCESS 40 nm
LAUNCH DATE 2011
VS
NVIDIA
GEFORCE

GeForce GTX 560 SE

CORE STATE GF114
VRAM 1024 MB
CLOCK SPEED —
TDP 150 W
BUS WIDTH 192 bit
ARCHITECTURE Fermi 2.0
nm
PROCESS 40 nm
LAUNCH DATE 2012

PERFORMANCE BENCHMARKS

geekbench_opencl
6,493
7,171

Analysis: NVIDIA GeForce GT 555M vs NVIDIA GeForce GTX 560 SE

The NVIDIA GeForce GTX 560 SE and the NVIDIA GeForce GT 555M represent two distinct interpretations of the Fermi architecture, one aimed at desktop performance and the other at mobile efficiency. In the single available benchmark test, the Geekbench OpenCL score, the GTX 560 SE records a 10.4% advantage over the GT 555M. The GTX 560 SE achieves 7171 points, while the GT 555M scores 6493 points. This places the GTX 560 SE in the 39th percentile of all GPUs, whereas the GT 555M sits slightly lower in the 37th percentile. The data indicates a clear, albeit moderate, performance gap in raw compute throughput.

Head-to-Head Benchmarks

The head-to-head comparison is limited to a single Geekbench OpenCL run, but the result is decisive. The GTX 560 SE wins the only benchmark test, and the margin is 10.4%. In absolute terms, this translates to a 678-point difference in the raw score. This is a significant lead for a compute-focused workload, as OpenCL performance often scales with shading unit count and memory bandwidth.

Looking at the specifications that drive this result, the GTX 560 SE has double the shading units of the GT 555M, with 288 versus 144. The texture mapping units also double, from 24 on the GT 555M to 48 on the GTX 560 SE. The render output units see a 50% increase, from 16 to 24. These architectural advantages compound to produce the observed benchmark delta.

Memory bandwidth further separates the two. The GTX 560 SE uses GDDR5 memory on a 192-bit bus, delivering 91.87 GB/s of bandwidth. The GT 555M relies on DDR3 memory on a 128-bit bus, which provides only 28.80 GB/s. This is a 219% difference in memory bandwidth, a factor that heavily influences OpenCL workloads that are memory-bound.

The pixel and texture rates reflect the same hierarchy. The GTX 560 SE achieves a pixel rate of 8.832 GPixel/s and a texture rate of 35.33 GTexel/s. The GT 555M manages only 3.540 GPixel/s and 14.16 GTexel/s, respectively. The FP32 compute output is similarly lopsided: 847.9 GFLOPS for the GTX 560 SE versus 339.8 GFLOPS for the GT 555M.

In the nearest rival context, the GTX 560 SE’s score of 7171 places it within 0.2% of the NVIDIA GeForce GTX 970 and 0.4% below the AMD Radeon Vega 8 Mobile. The GT 555M’s score of 6493 is nearly identical to the NVIDIA Quadro M5000M, which trails by just 0.2%. This suggests that while the two cards are separated by a meaningful margin, they are both positioned in a competitive mid-range bracket relative to their contemporaries.

The Verdict

From a pure performance standpoint, the NVIDIA GeForce GTX 560 SE is the unambiguous winner. It wins the sole benchmark comparison by a double-digit percentage, and its underlying specifications are superior across every measurable compute and memory metric. For any task that leverages OpenCL, the GTX 560 SE delivers a 10.4% higher score, which is a substantial advantage.

The data does not support selecting the GT 555M for performance reasons. However, the GT 555M has a vastly different power profile. The GTX 560 SE is a dual-slot desktop card with a 150 W TDP and two 6-pin power connectors, requiring a 450 W power supply. The GT 555M, in contrast, is a mobile part with a 35 W TDP and no dedicated power connectors, designed for portable devices. This is a 115 W difference in power draw, which is critical for system design.

The GTX 560 SE is the appropriate choice for a desktop build where power consumption and physical size are secondary to compute capability. The GT 555M is the only viable option for a laptop or other portable form factor where the 35 W TDP is a hard constraint. The benchmark data shows the GTX 560 SE is 10.4% faster, but the GT 555M is in a completely different power class.

Where Each One Wins

The GTX 560 SE wins decisively in raw performance. The Geekbench OpenCL score of 7171 versus 6493 demonstrates a clear edge in general-purpose GPU compute. This advantage is rooted in its larger chip, the GF114, which houses 1,950 million transistors on a 332 mm² die. The GT 555M’s GF106 chip is smaller, with 1,170 million transistors on a 238 mm² die. This larger silicon area translates directly to more shading units, TMUs, and ROPs, which in turn drive higher pixel, texture, and FP32 rates.

The GTX 560 SE also wins on memory subsystem capability. The 91.87 GB/s bandwidth is more than triple the 28.80 GB/s of the GT 555M. This makes the GTX 560 SE substantially better suited for high-resolution textures and data-intensive compute workloads. The GT 555M’s DDR3 memory, while adequate for its mobile context, is a bottleneck compared to the GDDR5 on the desktop part.

The GT 555M wins in the efficiency domain, though this is not captured by the benchmark score. Its 35 W TDP is a fraction of the GTX 560 SE’s 150 W. The GT 555M requires no external power connectors and is portable-device dependent for display outputs, making it the only option for thin-and-light laptops. The GTX 560 SE, with its 210 mm length and dual-slot footprint, is strictly a desktop component.

For users with a fixed desktop platform and access to a 450 W PSU, the GTX 560 SE is the superior performer. For users needing a GPU in a mobile chassis, the GT 555M is the only choice, and its benchmark score of 6493 is respectable given its power envelope.

FAQ

Q: Which GPU has a higher Geekbench OpenCL score?

A: The NVIDIA GeForce GTX 560 SE scores 7171, which is 10.4% higher than the NVIDIA GeForce GT 555M’s score of 6493.

Q: How do the two cards compare in terms of memory bandwidth?

A: The GTX 560 SE has a memory bandwidth of 91.87 GB/s using GDDR5 on a 192-bit bus, while the GT 555M has 28.80 GB/s using DDR3 on a 128-bit bus.

Q: What are the power consumption figures for each card?

A: The GTX 560 SE has a TDP of 150 W, while the GT 555M has a TDP of 35 W.

Q: Which GPU is positioned higher in the overall performance percentile?

A: The GTX 560 SE is in the 39th percentile of all GPUs, while the GT 555M is in the 37th percentile.

Q: What are the shading unit counts for the two GPUs?

A: The GTX 560 SE has 288 shading units, and the GT 555M has 144 shading units.

Q: Are both GPUs based on the same architecture?

A: Both are based on the Fermi architecture, but the GTX 560 SE uses Fermi 2.0 with the GF114 chip, while the GT 555M uses the original Fermi design with the GF106 chip.

Architecture Differences

The two GPUs, while sharing the Fermi lineage, are architecturally distinct. The GTX 560 SE is built on the GF114 chip, which is designated as Fermi 2.0. The GT 555M uses the GF106 chip, which is the original Fermi architecture. Both are manufactured by TSMC on a 40 nm process node, but the similarities end there.

The GF114 chip is substantially larger, with a die size of 332 mm² and 1,950 million transistors. This yields a transistor density of 5.9 million per mm². The GF106 chip is smaller at 238 mm² with 1,170 million transistors, giving a density of 4.9 million per mm². The larger die allows for double the shading units (288 vs 144) and TMUs (48 vs 24), and 1.5 times the ROPs (24 vs 16).

Memory configuration is another major differentiator. The GTX 560 SE uses GDDR5 memory running at an effective 3.8 Gbps, connected via a 192-bit bus. The GT 555M uses DDR3 at an effective 1800 Mbps on a 128-bit bus. Both have 1024 MB of memory, but the GTX 560 SE’s bus width and memory type give it a 91.87 GB/s bandwidth versus 28.80 GB/s for the GT 555M.

The compute capabilities follow the hardware differences. The GTX 560 SE delivers 847.9 GFLOPS of FP32 performance, a 2.5x advantage over the GT 555M’s 339.8 GFLOPS. Pixel rate is 8.832 GPixel/s for the GTX 560 SE and 3.540 GPixel/s for the GT 555M. Texture rate is 35.33 GTexel/s versus 14.16 GTexel/s.

The physical and power characteristics are also divergent. The GTX 560 SE is a dual-slot desktop card measuring 210 mm, with a 150 W TDP and dual 6-pin power connectors. The GT 555M is a mobile chip with a 35 W TDP, no slot width specification, and no dedicated power connectors. Both use a PCIe 2.0 x16 interface and support DirectX 12 (11_0) and OpenGL 4.6. The GTX 560 SE offers display outputs of 2x DVI and 1x mini-HDMI 1.3a, while the GT 555M’s outputs are portable device dependent.

DETAILED SPECIFICATIONS

SPECIFICATION
GT 555M
GTX 560 SE
Core Specs
Shading Units
144
288 +100.0%
Shaders
144
288 +100.0%
TMUs
24
48 +100.0%
ROPs
16
24 +50.0%
SM Count
3
6 +100.0%
Clocks
GPU Clock
590 MHz
736 MHz
Shader Clock
1180 MHz
1472 MHz
Memory Clock
900 MHz 1800 Mbps effective
957 MHz 3.8 Gbps effective
Memory
Memory Size
1024 MB
1024 MB
VRAM (MB)
1,024
1,024 0.0%
Memory Type
DDR3
GDDR5
Memory Bus
128 bit
192 bit
Bandwidth
28.80 GB/s
91.87 GB/s
Cache
L1 Cache
64 KB (per SM)
64 KB (per SM)
L2 Cache
256 KB
384 KB
Performance
Pixel Rate
3.540 GPixel/s
8.832 GPixel/s
Texture Rate
14.16 GTexel/s
35.33 GTexel/s
FP32 (TFLOPS)
339.8 GFLOPS
847.9 GFLOPS
FP64 (TFLOPS)
28.32 GFLOPS (1:12)
70.66 GFLOPS (1:12)
Power
TDP
35 W
150 W
TDP (W)
35
150 +328.6%
Suggested PSU
—
450 W
Power Connectors
—
2x 6-pin
Architecture
Architecture
Fermi
Fermi 2.0
GPU Name
GF106
GF114
Generation
GeForce 500M
GeForce 500
Process Size
40 nm
40 nm
Transistors
1,170 million
1,950 million
Die Size
238 mm²
332 mm²
Foundry
TSMC
TSMC
Density
4.9M / mm²
5.9M / mm²
API Support
DirectX
12 (11_0)
12 (11_0)
OpenGL
4.6
4.6
OpenCL
1.1
1.1
CUDA
2.1
2.1
Shader Model
5.1
5.1
Physical
Slot Width
—
Dual-slot
Length
—
210 mm 8.3 inches
Outputs
Portable Device Dependent
2x DVI1x mini-HDMI 1.3a
Bus Interface
PCIe 2.0 x16
PCIe 2.0 x16
Other
Production
End-of-life
End-of-life
Predecessor
GeForce 400M
GeForce 400
Successor
GeForce 600M
GeForce 600
View GeForce GT 555M Details View GeForce GTX 560 SE Details