NVIDIA GeForce GT 1010 vs NVIDIA RTX PRO 5000 72 GB Blackwell Comparison

NVIDIA
GEFORCE

NVIDIA GeForce GT 1010

CORE STATE GP108
VRAM 2 GB
CLOCK SPEED 1468 MHz
TDP 30 W
BUS WIDTH 64 bit
ARCHITECTURE Pascal
nm
PROCESS 14 nm
LAUNCH DATE 2021
VS
NVIDIA
GEFORCE

RTX PRO 5000 72 GB Blackwell

CORE STATE GB202
VRAM 72 GB
CLOCK SPEED 2377 MHz
TDP 300 W
BUS WIDTH 384 bit
ARCHITECTURE Blackwell 2.0
nm
PROCESS 5 nm
LAUNCH DATE 2025

PERFORMANCE BENCHMARKS

geekbench_opencl
6,698
N/A
3dmark_3dmark_steel_nomad_dx12
N/A
9,579.5
passmark_directx_10
N/A
175
passmark_directx_11
N/A
219
passmark_directx_12
N/A
78
passmark_directx_9
N/A
311
passmark_g2d
N/A
914
passmark_g3d
N/A
24,310
passmark_gpu_compute
N/A
15,667

Analysis: NVIDIA GeForce GT 1010 vs NVIDIA RTX PRO 5000 72 GB Blackwell

# The Verdict

The data paints a stark contrast: the NVIDIA GeForce GT 1010 is an end-of-life entry-level card built on the legacy Pascal architecture, while the NVIDIA RTX PRO 5000 72 GB Blackwell is an active, top-tier workstation GPU based on Blackwell 2.0. The GT 1010 scores 6,698 in Geekbench OpenCL, placing it at the 38th percentile of all GPUs. The RTX PRO 5000, despite its massive specifications, averages 6,407 across its benchmark suite, sitting at the 37th percentile. This near-identical average score is misleading, as the RTX PRO 5000's benchmarks include a mix of DirectX 9, 10, 11, 12, G2D, G3D, and compute tests, while the GT 1010 only has a single OpenCL result.

For users strictly needing a basic display adapter with low power draw, the GT 1010 is the obvious choice. It requires no power connectors and a 200 W suggested PSU, making it drop-in compatible with older systems. Conversely, the RTX PRO 5000 demands a 700 W PSU and a 16-pin connector, targeting professionals who need 72 GB of GDDR7 memory and 66.94 TFLOPS FP32 performance. The GT 1010 wins on simplicity and compatibility; the RTX PRO 5000 wins on raw capability and future-proofing. The data shows no overlap in target use cases: one is a legacy placeholder, the other is a compute monster.

# Architecture Differences

The architectural gap is generational. The GT 1010 uses the GP108 chip on a 14 nm Samsung process, packing 1,800 million transistors into a 74 mm² die, yielding a transistor density of 24.3M per mm². The RTX PRO 5000 uses the GB202 chip on a 5 nm TSMC process, with 92,200 million transistors across a 750 mm² die, reaching 122.9M transistors per mm² — a five-fold density improvement.

The GT 1010 is Pascal architecture, supporting DirectX 12 (12_1), OpenGL 4.6, and Vulkan 1.4. It has no ray tracing or tensor cores. The RTX PRO 5000 is Blackwell 2.0, supporting DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4. It features 110 ray tracing cores and 440 tensor cores, enabling hardware-accelerated ray tracing and AI workloads. The GT 1010 has 256 shading units, 16 TMUs, and 8 ROPs. The RTX PRO 5000 has 14,080 shading units, 440 TMUs, and 160 ROPs — 55 times more shaders, 27.5 times more TMUs, and 20 times more ROPs.

Memory architectures diverge completely. The GT 1010 uses 2 GB of GDDR5 on a 64-bit bus, delivering 48.06 GB/s bandwidth. The RTX PRO 5000 uses 72 GB of GDDR7 on a 384-bit bus, delivering 1.34 TB/s — a 27.9-fold bandwidth increase. Clock speeds differ: the GT 1010 boosts to 1,468 MHz, while the RTX PRO 5000 boosts to 2,377 MHz. The GT 1010 has a 30 W TDP; the RTX PRO 5000 has a 300 W TDP. The bus interface also differs: PCIe 3.0 x4 for the GT 1010 versus PCIe 5.0 x16 for the RTX PRO 5000.

# Head-to-Head Benchmarks

The direct head-to-head benchmark array is empty, so the comparison relies on each card's individual benchmark suite. The GT 1010 posts a single Geekbench OpenCL score of 6,698. The RTX PRO 5000's most relevant comparable result is its Passmark G3D score of 24,310, which is 3.6 times higher than the GT 1010's OpenCL score, though they measure different APIs.

The RTX PRO 5000's Passmark GPU compute score is 15,667, indicating strong compute throughput. Its DirectX 9 score of 311 is nearly double its DirectX 12 score of 78, suggesting driver optimization for legacy APIs. The GT 1010's nearest rival is the AMD Radeon R7 M370, which scores 6,764 — a 1% difference, meaning the GT 1010 performs within statistical noise of that mobile card. The RTX PRO 5000's nearest rival is the NVIDIA GeForce GTX 460 SE, scoring 6,389, a 0.3% delta, and the AMD Radeon Vega 10 Mobile, scoring 6,476, a -1.1% delta.

The GT 1010's 6,698 score places it above the AMD Radeon R7 M460 (6,612, +1.3%) and the AMD Radeon HD 7730M (6,581, +1.8%), but below the AMD FirePro M5100 (6,830, -1.9%). The RTX PRO 5000's average of 6,407 sits below the AMD Radeon Vega 10 Mobile (6,476) and NVIDIA Quadro M5000M (6,481), but above the GTX 460 SE and GTX 580M (both 6,389). This indicates that the RTX PRO 5000's average is dragged down by its low DirectX 10 and 12 scores (175 and 78, respectively), which are likely synthetic bottlenecks rather than real-world performance indicators.

# Specification Differences

The two cards differ in nearly every measurable field. The GT 1010 has a base clock of 1,228 MHz and boost of 1,468 MHz; the RTX PRO 5000 has a base of 1,740 MHz and boost of 2,377 MHz. Memory size: 2 GB versus 72 GB. Memory type: GDDR5 versus GDDR7. Bus width: 64-bit versus 384-bit. Bandwidth: 48.06 GB/s versus 1.34 TB/s.

Pixel rate: 11.74 GPixel/s versus 380.3 GPixel/s. Texture rate: 23.49 GTexel/s versus 1,045.9 GTexel/s. FP32 performance: 751.6 GFLOPS versus 66.94 TFLOPS. The RTX PRO 5000 also lists FP16 at 66.94 TFLOPS (1:1), while the GT 1010 has no FP16 data. TDP: 30 W versus 300 W. Slot width: single-slot versus dual-slot. Power connectors: none versus 1x 16-pin. Suggested PSU: 200 W versus 700 W.

Bus interface: PCIe 3.0 x4 versus PCIe 5.0 x16. Display outputs: 1x DVI and 1x mini-HDMI 2.0 versus 4x DisplayPort 2.1b. Dimensions: the GT 1010 is 147 mm (5.8 inches) long; the RTX PRO 5000 is 267 mm (10.5 inches) long, 111 mm (4.4 inches) high, and 40 mm (1.6 inches) wide. Production status: end-of-life versus active. Release date: 2021-01-12 versus 2025-10-20. The GT 1010's predecessor is GeForce 900 and successor is GeForce 20; the RTX PRO 5000's predecessor is Workstation Ada with no successor listed.

# FAQ

Q: Which card has higher raw compute performance?

A: The RTX PRO 5000 has an FP32 rating of 66.94 TFLOPS, which is 89 times higher than the GT 1010's 751.6 GFLOPS. Its texture rate is 1,045.9 GTexel/s versus 23.49 GTexel/s.

Q: Why do the two cards have similar average benchmark scores?

A: The GT 1010 averages 6,698 from a single Geekbench OpenCL test. The RTX PRO 5000 averages 6,407 across eight tests, including low DirectX 10 (175) and DirectX 12 (78) scores, which pull its average down despite a high Passmark G3D score of 24,310.

Q: Can the GT 1010 do ray tracing?

A: No. The GT 1010 has no ray tracing cores and no tensor cores. The RTX PRO 5000 has 110 ray tracing cores and 440 tensor cores, supporting DirectX 12 Ultimate.

Q: What are the power requirements?

A: The GT 1010 has a 30 W TDP, no power connectors, and a suggested 200 W PSU. The RTX PRO 5000 has a 300 W TDP, requires one 16-pin connector, and needs a suggested 700 W PSU.

Q: Which card supports newer display outputs?

A: The RTX PRO 5000 has four DisplayPort 2.1b outputs. The GT 1010 has one DVI and one mini-HDMI 2.0 output, limiting it to older display standards.

Q: How do their nearest rivals compare?

A: The GT 1010's closest rival is the AMD Radeon R7 M370 at 6,764 (-1%). The RTX PRO 5000's closest rival is the NVIDIA GeForce GTX 460 SE at 6,389 (+0.3%), though this comparison uses the RTX PRO 5000's average, not its peak G3D score.

# Where Each One Wins

The GT 1010 wins in scenarios requiring minimal power and physical footprint. Its 30 W TDP, single-slot design, and lack of power connectors make it suitable for legacy systems with modest PSUs. Its 147 mm length fits in compact cases. The PCIe 3.0 x4 interface is sufficient for its 48.06 GB/s bandwidth. It is end-of-life, but for basic 2D workloads or as a diagnostic card, the data shows it performs competitively with mobile GPUs like the AMD Radeon R7 M460 and HD 7730M.

The RTX PRO 5000 wins in every performance category. Its 72 GB GDDR7 memory with 1.34 TB/s bandwidth targets large dataset workloads, such as AI inference or rendering. The 110 ray tracing cores and 440 tensor cores enable real-time ray tracing and AI acceleration. Its 66.94 TFLOPS FP32 and FP16 (1:1) performance supports compute-heavy tasks. The dual-slot design and 267 mm length indicate a workstation-class card. The PCIe 5.0 x16 interface provides ample host bandwidth.

The benchmark data shows the RTX PRO 5000 excels in Passmark G3D (24,310) and GPU compute (15,667), but its DirectX 10, 11, and 12 scores (175, 219, 78) are anomalously low, suggesting those tests are not representative of its capability. The GT 1010 has no such multi-API data, only OpenCL. Users needing a modern API feature set — DirectX 12 Ultimate, four DisplayPort 2.1b outputs — should choose the RTX PRO 5000. Users needing a legacy-compatible, low-power display output should choose the GT 1010. There is no overlap in their winning use cases.

DETAILED SPECIFICATIONS

SPECIFICATION
GT 1010
RTX PRO 5000 72 GB Blackwell
Core Specs
Shading Units
256
14,080 +5400.0%
Shaders
256
14,080 +5400.0%
TMUs
16
440 +2650.0%
ROPs
8
160 +1900.0%
SM Count
2
110 +5400.0%
Clocks
Base Clock
1228 MHz
1740 MHz
Boost Clock
1468 MHz
2377 MHz
Memory Clock
1502 MHz 6 Gbps effective
1750 MHz 28 Gbps effective
Memory
Memory Size
2 GB
72 GB
VRAM (MB)
2,048
73,728 +3500.0%
Memory Type
GDDR5
GDDR7
Memory Bus
64 bit
384 bit
Bandwidth
48.06 GB/s
1.34 TB/s
Cache
L1 Cache
16 KB (per SM)
128 KB (per SM)
L2 Cache
256 KB
96 MB
Performance
Pixel Rate
11.74 GPixel/s
380.3 GPixel/s
Texture Rate
23.49 GTexel/s
1,045.9 GTexel/s
FP32 (TFLOPS)
751.6 GFLOPS
66.94 TFLOPS
FP64 (TFLOPS)
31.32 GFLOPS (1:24)
1,045.9 GFLOPS (1:64)
FP16 (TFLOPS)
—
66.94 TFLOPS (1:1)
AI/RT
RT Cores
—
110
Tensor Cores
—
440
Power
TDP
30 W
300 W
TDP (W)
30
300 +900.0%
Suggested PSU
200 W
700 W
Power Connectors
None
1x 16-pin
Architecture
Architecture
Pascal
Blackwell 2.0
GPU Name
GP108
GB202
Generation
GeForce 10
Blackwell PRO W (x000)
Process Size
14 nm
5 nm
Transistors
1,800 million
92,200 million
Die Size
74 mm²
750 mm²
Foundry
Samsung
TSMC
Density
24.3M / mm²
122.9M / mm²
API Support
DirectX
12 (12_1)
12 Ultimate (12_2)
OpenGL
4.6
4.6
Vulkan
1.4
1.4
OpenCL
3.0
3.0
CUDA
6.1
12.0
Shader Model
6.8
6.9
Physical
Slot Width
Single-slot
Dual-slot
Length
147 mm 5.8 inches
267 mm 10.5 inches
Height
—
111 mm 4.4 inches
Outputs
1x DVI1x mini-HDMI 2.0
4x DisplayPort 2.1b
Bus Interface
PCIe 3.0 x4
PCIe 5.0 x16
Other
Production
End-of-life
Active
Predecessor
GeForce 900
Workstation Ada
Successor
GeForce 20
—
View GeForce GT 1010 Details View RTX PRO 5000 72 GB Blackwell Details