NVIDIA GeForce 940MX vs NVIDIA GeForce RTX 5060 Ti 8 GB Comparison

NVIDIA
GEFORCE

NVIDIA GeForce 940MX

CORE STATE GM107
VRAM 2 GB
CLOCK SPEED 861 MHz
TDP 23 W
BUS WIDTH 64 bit
ARCHITECTURE Maxwell
nm
PROCESS 28 nm
LAUNCH DATE 2016
VS
NVIDIA
GEFORCE

GeForce RTX 5060 Ti 8 GB

CORE STATE GB206
VRAM 8 GB
CLOCK SPEED 2572 MHz
TDP 180 W
BUS WIDTH 128 bit
ARCHITECTURE Blackwell 2.0
nm
PROCESS 5 nm
LAUNCH DATE 2025

PERFORMANCE BENCHMARKS

geekbench_opencl
4,939
N/A
geekbench_vulkan
4,749
N/A
3dmark_3dmark_steel_nomad_dx12
N/A
4,019
passmark_directx_10
N/A
142
passmark_directx_11
N/A
220
passmark_directx_12
N/A
82
passmark_directx_9
N/A
228
passmark_g2d
N/A
1,169
passmark_g3d
N/A
21,981
passmark_gpu_compute
N/A
11,365

Analysis: NVIDIA GeForce 940MX vs NVIDIA GeForce RTX 5060 Ti 8 GB

Head-to-Head Benchmarks

The RTX 5060 Ti 8 GB and the GeForce 940MX do not share a single common benchmark in the data pack, making a direct score-to-score comparison impossible. Instead, the available metrics reveal two GPUs operating in completely different performance strata. The RTX 5060 Ti produces a Passmark G3D score of 21981, while the 940MX's nearest rival in the average benchmark score table—the NVIDIA GeForce GTX 560M—sits at 4855. The 940MX itself averages 4844 across its two Geekbench entries, which is a fraction of the RTX 5060 Ti's output.

The RTX 5060 Ti's raw compute advantage is staggering. Its FP32 throughput is listed at 23.70 TFLOPS, whereas the 940MX manages only 881.7 GFLOPS. That is a magnitude difference of roughly 27 times in theoretical single-precision performance. The texture rate tells a similar story: 370.4 GTexel/s against 27.55 GTexel/s, a 13.4-fold gap. Pixel rate follows at 123.5 GPixel/s versus 6.888 GPixel/s, an 18-times difference. These are not incremental improvements; they represent entirely different product categories.

Memory bandwidth further separates the two. The RTX 5060 Ti offers 448.0 GB/s over a 128-bit GDDR7 interface, while the 940MX is constrained to 40.10 GB/s on a 64-bit GDDR5 bus. That is an 11.2-times bandwidth advantage. The RTX 5060 Ti also carries 8 GB of VRAM versus 2 GB, and its memory clock runs at 1750 MHz (28 Gbps effective) compared to the 940MX's 1253 MHz (5 Gbps effective). In every measurable metric where both have data, the RTX 5060 Ti dominates by an order of magnitude or more.

The 940MX's only standalone scores come from Geekbench OpenCL and Vulkan, at 4939 and 4749 respectively. The RTX 5060 Ti has no Geekbench entries in the pack, so those numbers cannot be directly compared. However, the RTX 5060 Ti's Passmark G2D score of 1169 and its Passmark GPU Compute score of 11365 indicate a device that is processing far more data per second. The 940MX's percentile ranking of 28 versus the RTX 5060 Ti's 29 shows they sit near each other in the overall GPU distribution, but that is a reflection of the massive installed base of legacy hardware, not of comparable performance.

The RTX 5060 Ti also records a 3DMark Steel Nomad DX12 score of 4019, a modern load that the 940MX cannot run given its DirectX 12 (11_0) API level. The 940MX's API support tops out at DirectX 12 (11_0) feature level, while the RTX 5060 Ti supports DirectX 12 Ultimate (12_2). This is a functional limitation, not just a performance one—the 940MX is locked out of the latest graphics workloads entirely.

The Verdict

The data is unambiguous: the RTX 5060 Ti 8 GB is the superior product in every category where both have recorded numbers. The 940MX is end-of-life, uses a 28 nm process, and delivers 881.7 GFLOPS of FP32 compute. The RTX 5060 Ti is an active product on a 5 nm node delivering 23.70 TFLOPS. If a user needs to run modern DirectX 12 Ultimate workloads, the 940MX is not a candidate—it cannot even meet the feature level requirement. The RTX 5060 Ti's nearest rivals in the average benchmark score table are all legacy or low-end mobile parts like the AMD FirePro W5130M and the NVIDIA GeForce GTS 450, with deltaPct values between -0.6 and 0.2. This means the RTX 5060 Ti is clustered with decade-old hardware in the aggregate score distribution, but that is an artifact of averaging all benchmark types. Its Passmark G3D score of 21981 places it far above those rivals.

For anyone choosing between these two, the RTX 5060 Ti is the only viable option for gaming, content creation, or any GPU-accelerated task. The 940MX's 2 GB VRAM and 64-bit bus make it unsuitable even for light modern workloads. The 940MX might still function for basic 2D desktop use or legacy applications, but the RTX 5060 Ti's 8 GB GDDR7 memory and 448.0 GB/s bandwidth render the older card obsolete in all practical scenarios. The RTX 5060 Ti's launch MSRP is 379 USD, and it requires a 450 W PSU with a single 8-pin connector, while the 940MX draws 23 W and needs no external power. The power efficiency difference is stark, but the performance difference is far larger.

FAQ

Q: Which GPU has higher FP32 compute performance?

A: The RTX 5060 Ti 8 GB delivers 23.70 TFLOPS of FP32, while the GeForce 940MX provides 881.7 GFLOPS. The RTX 5060 Ti is roughly 27 times faster in this metric.

Q: Do both GPUs support the same DirectX version?

A: No. The RTX 5060 Ti supports DirectX 12 Ultimate (12_2), while the 940MX is limited to DirectX 12 (11_0). This means the 940MX cannot run games or applications requiring 12_2 features.

Q: What is the memory configuration difference?

A: The RTX 5060 Ti has 8 GB of GDDR7 on a 128-bit bus with 448.0 GB/s bandwidth. The 940MX has 2 GB of GDDR5 on a 64-bit bus with 40.10 GB/s bandwidth. The RTX 5060 Ti offers 11.2 times the memory bandwidth.

Q: Which card has a higher transistor count?

A: The RTX 5060 Ti has 21,900 million transistors on a 181 mm² die, while the 940MX has 1,870 million transistors on a 148 mm² die. The newer card has approximately 11.7 times more transistors.

Q: Are there any benchmarks where the 940MX wins?

A: In the provided data, the 940MX has no wins over the RTX 5060 Ti. The two cards share no common benchmarks, but the RTX 5060 Ti's scores in Passmark and 3DMark are far higher than the 940MX's Geekbench results in absolute terms.

Q: What is the production status of each card?

A: The RTX 5060 Ti is listed as Active, while the 940MX is End-of-life. The RTX 5060 Ti was released on 2025-04-15, and the 940MX on 2016-06-27.

Specification Differences

The two GPUs differ in almost every hardware specification. The RTX 5060 Ti uses the GB206 chip built on a 5 nm process at TSMC, while the 940MX uses the GM107 chip on a 28 nm process, also at TSMC. Transistor count jumps from 1,870 million to 21,900 million, and die size grows from 148 mm² to 181 mm². Transistor density improves dramatically from 12.6M / mm² to 121.0M / mm².

Clock speeds are not comparable: the RTX 5060 Ti's base clock is 2407 MHz with a boost of 2572 MHz, while the 940MX runs at 795 MHz base and 861 MHz boost. The RTX 5060 Ti's memory clock is 1750 MHz (28 Gbps effective) versus 1253 MHz (5 Gbps effective) for the 940MX. Shading units increase from 512 to 4608, TMUs from 32 to 144, and ROPs from 8 to 48. The RTX 5060 Ti adds 36 RT cores and 144 tensor cores; the 940MX has none of either.

The RTX 5060 Ti has a TDP of 180 W, requires a dual-slot cooler and a 1x 8-pin power connector, and recommends a 450 W PSU. The 940MX draws 23 W, is an MXM Module, needs no power connectors, and has no suggested PSU. Bus interfaces differ: PCIe 5.0 x8 for the RTX 5060 Ti, PCIe 3.0 x8 for the 940MX. Display outputs are 1x HDMI 2.1b and 3x DisplayPort 2.1b on the new card, versus "Portable Device Dependent" on the old one. The RTX 5060 Ti measures 241 mm x 111 mm x 40 mm; the 940MX has no listed dimensions.

Architecture Differences

The RTX 5060 Ti is built on Blackwell 2.0 architecture, part of the GeForce 50-series generation. The 940MX uses Maxwell architecture from the GeForce 900M generation. These are separated by multiple architectural generations—the RTX 5060 Ti's predecessor is listed as GeForce 40, while the 940MX's predecessor is GeForce 800M. The newer card is a discrete desktop GPU with a fixed dual-slot form factor, while the 940MX is a mobile-class MXM module.

The Blackwell 2.0 architecture includes dedicated RT cores and tensor cores, which are entirely absent from the Maxwell-based 940MX. This means the RTX 5060 Ti can accelerate ray tracing and AI workloads in hardware, while the 940MX cannot. The RTX 5060 Ti's FP16 performance is 23.70 TFLOPS at a 1:1 ratio with FP32, indicating full-rate half-precision compute. The 940MX lists no FP16 capability at all. Memory technology also differs fundamentally: GDDR7 on the RTX 5060 Ti versus GDDR5 on the 940MX. The API support reflects the architectural gap—DirectX 12 Ultimate (12_2) versus DirectX 12 (11_0), with both supporting OpenGL 4.6 and Vulkan 1.4.

The transistor density difference (121.0M / mm² versus 12.6M / mm²) is a direct result of the process node shrink from 28 nm to 5 nm. The RTX 5060 Ti also features a PCIe 5.0 x8 interface, doubling the per-lane bandwidth of the 940MX's PCIe 3.0 x8 connection. The newer card's display outputs support HDMI 2.1b and DisplayPort 2.1b, while the 940MX's outputs are dependent on the portable device it is integrated into.

Where Each One Wins

The RTX 5060 Ti 8 GB wins in every measurable performance category. It is the only choice for modern 3D gaming at high settings, given its DirectX 12 Ultimate support, 8 GB GDDR7 memory, and 23.70 TFLOPS of FP32 compute. It handles ray tracing and tensor workloads natively, which the 940MX cannot do at all. The RTX 5060 Ti's 448.0 GB/s bandwidth and 36 RT cores make it suitable for current-generation game engines, 3D rendering, and AI inference tasks. Its 123.5 GPixel/s pixel rate and 370.4 GTexel/s texture rate indicate it can push high-resolution displays and heavy texture filtering without bottlenecking.

The 940MX wins only in power efficiency and legacy compatibility. Its 23 W TDP means it can operate without external power, making it suitable for thin-and-light laptops or systems with severe power constraints. Its MXM form factor and no-connector design fit into portable devices. It supports DirectX 12 (11_0), which covers many older games and applications that have not been updated to 12_2. The 940MX's 2 GB GDDR5 memory and 40.10 GB/s bandwidth are enough for basic 2D desktop work, video playback, and very old or low-resolution 3D titles. Its 881.7 GFLOPS of FP32 compute is adequate for simple GPGPU tasks but will struggle with anything modern.

The RTX 5060 Ti's nearest rivals in the average benchmark score table are the AMD FirePro W5130M, NVIDIA GeForce GTS 450, and AMD Radeon R7 M265/M360, all within 0.6% of its average score. This indicates that in the aggregate, the RTX 5060 Ti is not far from those legacy parts, but its Passmark G3D score of 21981 and 3DMark Steel Nomad score of 4019 show it is dramatically faster in actual 3D workloads. The 940MX's nearest rivals include the GTX 560M and GTS 450, placing it in the same performance class as early-2010s desktop GPUs. For any user deciding between these two today, the RTX 5060 Ti is the only card that can handle current software, while the 940MX is best relegated to legacy systems where its low power draw and compact size are the primary considerations.

DETAILED SPECIFICATIONS

SPECIFICATION
940MX
RTX 5060 Ti 8 GB
Core Specs
Shading Units
512
4,608 +800.0%
Shaders
512
4,608 +800.0%
TMUs
32
144 +350.0%
ROPs
8
48 +500.0%
SM Count
—
36
Clocks
Base Clock
795 MHz
2407 MHz
Boost Clock
861 MHz
2572 MHz
Memory Clock
1253 MHz 5 Gbps effective
1750 MHz 28 Gbps effective
Memory
Memory Size
2 GB
8 GB
VRAM (MB)
2,048
8,192 +300.0%
Memory Type
GDDR5
GDDR7
Memory Bus
64 bit
128 bit
Bandwidth
40.10 GB/s
448.0 GB/s
Cache
L1 Cache
64 KB (per SMM)
128 KB (per SM)
L2 Cache
1024 KB
32 MB
Performance
Pixel Rate
6.888 GPixel/s
123.5 GPixel/s
Texture Rate
27.55 GTexel/s
370.4 GTexel/s
FP32 (TFLOPS)
881.7 GFLOPS
23.70 TFLOPS
FP64 (TFLOPS)
27.55 GFLOPS (1:32)
370.4 GFLOPS (1:64)
FP16 (TFLOPS)
—
23.70 TFLOPS (1:1)
AI/RT
RT Cores
—
36
Tensor Cores
—
144
Power
TDP
23 W
180 W
TDP (W)
23
180 +682.6%
Suggested PSU
—
450 W
Power Connectors
None
1x 8-pin
Architecture
Architecture
Maxwell
Blackwell 2.0
GPU Name
GM107
GB206
Generation
GeForce 900M
GeForce 50
Process Size
28 nm
5 nm
Transistors
1,870 million
21,900 million
Die Size
148 mm²
181 mm²
Foundry
TSMC
TSMC
Density
12.6M / mm²
121.0M / mm²
API Support
DirectX
12 (11_0)
12 Ultimate (12_2)
OpenGL
4.6
4.6
Vulkan
1.4
1.4
OpenCL
3.0
3.0
CUDA
5.0
12.0
Shader Model
6.7 (5.1)
6.9
Physical
Slot Width
MXM Module
Dual-slot
Length
—
241 mm 9.5 inches
Height
—
111 mm 4.4 inches
Outputs
Portable Device Dependent
1x HDMI 2.1b3x DisplayPort 2.1b
Bus Interface
PCIe 3.0 x8
PCIe 5.0 x8
Other
Launch Price
—
379 USD
Production
End-of-life
Active
Predecessor
GeForce 800M
GeForce 40
Successor
GeForce 10 Mobile
GeForce 60
View GeForce 940MX Details View GeForce RTX 5060 Ti 8 GB Details